参数资料
型号: SC202MLTRT
厂商: Semtech
文件页数: 14/19页
文件大小: 0K
描述: CONVERTER DC/DC 3.3V OUT 500MA
标准包装: 1
系列: SC202
类型: 非隔离(POL)
输出数: 1
电压 - 输入(最小): 2.9V
电压 - 输入(最大): 5.5V
Voltage - Output 1: 0.8 ~ 3.3 V
电流 - 输出(最大): 500mA
电源(瓦) - 制造商系列: 1.65W
安装类型: 表面贴装
封装/外壳: 13-VFQFN 裸露焊盘
尺寸/尺寸: 0.12" L x 0.10" W x 0.04" H(3.0mm x 2.5mm x 1.0mm)
包装: 标准包装
工作温度: -40°C ~ 85°C
电源(瓦特)- 最大: 1.65W
其它名称: SC202MLDKR
NOT RECOMMENDED FOR NEW DESIGN
Applications Information (continued)
SC202
Load
Demand
( I OUT )
V OUT +2.5%
V OUT
V OUT -2%
V LX
OFF
BURST
PSAVE
EXIT
Over-Voltage Protection
Over-voltage protection ensures the output voltage does
not rise to a level that could damage its load. When V OUT
exceeds the regulation voltage by 15%, the PWM drive is
disabled. Switching does not resume until V OUT has fallen
below the regulation voltage by 2%.
Current Limit
The SC202 switching stage is protected by a current limit
function. If the output load exceeds the PMOS current
limit for 32 consecutive switching cycles, the device enters
fold-back current limit mode and the output current is
PWM Mode at PSAVE Mode at PWM Mode at
Medium/High Light Load Medium/High
Load Load
Time
Figure 2 — Transitions Between PWM and PSAVE Modes
Protection Features
The SC202 provides the following protection features:
limited to approximately 150mA. Under these conditions,
the output voltage will be the product of I FB-LIM and the load
resistance. The load must fall below I FB-LIM for the device to
exit fold-back current limit mode. This function makes the
device capable of sustaining an indefinite short circuit on
its output under fault conditions.
Thermal Shutdown
?
?
?
?
?
Soft-Start Operation
Over-Voltage Protection
Current Limit
Thermal Shutdown
Under-Voltage Lockout
The SC202 has a thermal shutdown feature to protect the
device if the junction temperature exceeds 160°C. During
thermal shutdown, the PMOS and NMOS switches are
both disabled, tri-stating the LX output. When the junc-
tion temperature drops by the hysteresis value (20°C), the
device goes through the soft-start process and resumes
Soft-Start
The soft-start sequence is activated after a transition from
an all zeros CTL code to a non-zero CTL code enables the
device. At start-up, the PMOS current limit is stepped
through four levels: 25%, 40%, 60%, and 100%. Each step
is maintained for 60μs following an internal reference start
up of 20μs, resulting in a total nominal start-up period of
260μs. If V OUT reaches 90% of the target within the first 2
steps, the device continues in PSAVE mode at the end of
normal operation.
Under-Voltage Lockout
UVLO (Under-Voltage Lockout) activates when the supply
voltage drops below the falling UVLO threshold. This pre-
vents the device from entering an ambiguous state in
which regulation cannot be maintained. Hysteresis of
approximately 200mV is included to prevent chattering
near the threshold.
soft-start; otherwise, it goes into PWM mode. Note the
V OUT ripple in PSAVE mode can be larger than the ripple in
PWM mode.
14
相关PDF资料
PDF描述
SC2220-R42 INDUCTOR SMD 0.42UH 4.8A1MHZ
SC2506-6R8 INDUCTOR SMD 6.8UH 1.30A 100KHZ
SC31-680 INDUCTOR SMD 68UH 0.13A 1MHZ
SC312MF-6R8 INDUCTOR SMD 6.8UH 1.10A 100KHZ
SC32-8R2 INDUCTOR SMD 8.2UH 0.77A 7.96MHZ
相关代理商/技术参数
参数描述
SC-2030 制造商:Nidec Copal 功能描述:SWIT ROTARY 10 MINUS SLOT PC PINS 0.1A 5VDC - Bulk 制造商:Nidec Copal 功能描述:Switch, rotary, min, PCB, 0-9, comp,pcb
SC-2030B 制造商:Nidec Copal 功能描述:SWIT ROTARY 10 MINUS SLOT GW 0.1A 5VDC - Bulk 制造商:Nidec Copal 功能描述:Switch, rotary, min, PCB, 0-9, comp,sur
SC-2030TB 制造商:Nidec Copal 功能描述:SWIT ROTARY 10 SLOT SHAFT PC PINS 0.1A 5VDC - Tape and Reel
SC-2030W 制造商:Nidec Copal 功能描述:SWIT ROTARY 10 SLOT SHAFT PC PINS 0.1A 5VDC - Trays
SC-2031 制造商:Nidec Copal 功能描述:SWIT ROTARY 10 MINUS SLOT PC PINS 0.1A 5VDC - Bulk 制造商:Nidec Copal 功能描述:Switch, rotary, min, PCB, 0-9, comp,pcb