- 您现在的位置：买卖IC网 > Datasheet目录879 > SC202MLTRT (Semtech)CONVERTER DC/DC 3.3V OUT 500MA Datasheet资料下载
参数资料
| 型号： | SC202MLTRT |
| 厂商： | Semtech |
| 文件页数： | 15/19页 |
| 文件大小： | 0K |
| 描述： | CONVERTER DC/DC 3.3V OUT 500MA |
| 标准包装： | 1 |
| 系列： | SC202 |
| 类型： | 非隔离（POL） |
| 输出数： | 1 |
| 电压 - 输入（最小）： | 2.9V |
| 电压 - 输入（最大）： | 5.5V |
| Voltage - Output 1： | 0.8 ~ 3.3 V |
| 电流 - 输出（最大）： | 500mA |
| 电源（瓦） - 制造商系列： | 1.65W |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 13-VFQFN 裸露焊盘 |
| 尺寸/尺寸： | 0.12" L x 0.10" W x 0.04" H（3.0mm x 2.5mm x 1.0mm） |
| 包装： | 标准包装 |
| 工作温度： | -40°C ~ 85°C |
| 电源（瓦特）- 最大： | 1.65W |
| 其它名称： | SC202MLDKR |
NOT RECOMMENDED FOR NEW DESIGN
Applications Information (continued)
SC202
C OUT Selection
The internal voltage loop compensation in the SC202
limits the minimum output capacitor value to 10μF. This
is due to its influence on the the loop crossover frequency,
phase margin, and gain margin. Increasing the output
capacitor above this minimum value will reduce the cross-
over frequency and provide greater phase margin.
Capacitors with X7R or X5R ceramic dielectric are recom-
mended for their low ESR and superior temperature and
value exceeds the necessary capacitance value at the pro-
grammed output voltage. Check the manufacturer ’s
capacitance vs. DC voltage graphs when selecting an
output capacitor to ensure the capacitance will be
adequate.
Table 2 lists the manufacturers of recommended output
capacitor options.
Table 2 — Recommended Output Capacitors
voltage characteristics. Y5V capacitors should not be used
as their temperature coefficients make them unsuitable
for this application.
In addition to ensuring stability, the output capacitor
serves other important functions. This capacitor deter-
mines the output voltage ripple — as capacitance
increases, ripple voltage decreases. It also supplies current
during a large load step for a few switching cycles until
the control loop responds (typically 3 switching cycles).
Once the loop responds, regulation is restored and the
Manufacturer
Part Nunber
Murata
GRM188R60J106ME47D
Murata
GRM21BR60J106K
Taiyo Yuden
JMK107BJ106MA-T
TDK
C1608X5R0J106MT
Value
(μF)
10±20%
10±10%
10±20%
10±20%
Type
X5R
X5R
X5R
X5R
Rated
Voltage
(VDC)
6.3
6.3
6.3
6.3
Dimensions
LxWxH (mm)
Case Size
1.6x0.8x0.8
0603
2.0x1.25x1.25
0805
1.6x0.8x0.8
0603
1.6x0.8x0.8
0603
desired output is reached. During the period prior to PWM
operation resuming, the relationship between output
voltage and output capacitance can be approximated
using the equation
C IN Selection
The SC202 input source current will appear as a DC supply
current with a triangular ripple imposed on it. To prevent
large input voltage ripple, a low ESR ceramic capacitor is
C OUT
3 I LOAD
V DROOP f
required. A minimum value of 4.7μF should be used. It is
important to consider the DC voltage coefficient charac-
teristics when determining the actual required value. For
This equation can be used to approximate the minimum
output capacitance needed to ensure voltage does not
droop below an acceptable level. For example, a load step
from 50mA to 400mA requiring droop less than 50mV
would require the minimum output capacitance to be
example, a 10μF, 6.3V, X5R ceramic capacitor with 5V DC
applied may exhibit a capacitance as low as 4.5μF. The
value of required input capacitance is estimated by deter-
mining the acceptable input ripple voltage and calculating
the minimum value required for C IN using the equation
C OUT
6 . 0 F
3 0.4
0 . 05 3 . 5 10 6
In this example, using a standard 10μF capacitor would be
C IN
V OUT
V IN
V
I OUT
1
V OUT
V IN
ESR f
adequate to keep voltage droop less than the desired
limit. Note that if the voltage droop limit were decreased
from 50mV to 25mV, the output capacitance would need
to be increased to at least 12μF (twice as much capaci-
The input voltage ripple is at maximum level when the
input voltage is twice the output voltage (50% duty cycle
scenario).
tance for half the droop). Capacitance will decrease from
the nominal value when a ceramic capacitor is biased with
a DC current, so it is important to select a capacitor whose
15
相关PDF资料 |
PDF描述 |
|---|---|
| SC2220-R42 | INDUCTOR SMD 0.42UH 4.8A1MHZ |
| SC2506-6R8 | INDUCTOR SMD 6.8UH 1.30A 100KHZ |
| SC31-680 | INDUCTOR SMD 68UH 0.13A 1MHZ |
| SC312MF-6R8 | INDUCTOR SMD 6.8UH 1.10A 100KHZ |
| SC32-8R2 | INDUCTOR SMD 8.2UH 0.77A 7.96MHZ |
相关代理商/技术参数 |
参数描述 |
|---|---|
| SC-2030 | 制造商:Nidec Copal 功能描述:SWIT ROTARY 10 MINUS SLOT PC PINS 0.1A 5VDC - Bulk 制造商:Nidec Copal 功能描述:Switch, rotary, min, PCB, 0-9, comp,pcb |
| SC-2030B | 制造商:Nidec Copal 功能描述:SWIT ROTARY 10 MINUS SLOT GW 0.1A 5VDC - Bulk 制造商:Nidec Copal 功能描述:Switch, rotary, min, PCB, 0-9, comp,sur |
| SC-2030TB | 制造商:Nidec Copal 功能描述:SWIT ROTARY 10 SLOT SHAFT PC PINS 0.1A 5VDC - Tape and Reel |
| SC-2030W | 制造商:Nidec Copal 功能描述:SWIT ROTARY 10 SLOT SHAFT PC PINS 0.1A 5VDC - Trays |
| SC-2031 | 制造商:Nidec Copal 功能描述:SWIT ROTARY 10 MINUS SLOT PC PINS 0.1A 5VDC - Bulk 制造商:Nidec Copal 功能描述:Switch, rotary, min, PCB, 0-9, comp,pcb |
发布紧急采购，3分钟左右您将得到回复。