参数资料
型号: SFPA4096Q1BO2TO-I-DT-223-STD
厂商: Swissbit NA Inc
文件页数: 16/76页
文件大小: 0K
描述: FLASH SSD SMART UDMA 2.5" 4GB
视频文件: Swissbit Manufacturing Overview
RoHS指令信息: Environment Protection Declaration
标准包装: 4
系列: P-120
存储容量: 4GB
存储器类型: FLASH
其它名称: 1052-1024
6.3.2.2 Ultra DMA Data transfer phase rules
1.
2.
The data transfer phase is in effect from after Ultra DMA burst initiation until Ultra DMA burst
termination.
A recipient pauses an Ultra DMA burst by negating -DMARDY and resumes an Ultra DMA burst by
reasserting -DMARDY.
3. A sender pauses an Ultra DMA burst by not generating STROBE edges and resumes by generating
STROBE edges.
4. A recipient shall not signal a termination request immediately when the sender stops generating
STROBE edges. In the absence of a termination from the sender the recipient shall always negate -
DMARDY and wait the required period before signaling a termination request.
5. A sender may generate STROBE edges at greater than the minimum period specified by the enabled
Ultra DMA mode. The sender shall not generate STROBE edges at less than the minimum period
specified by the enabled Ultra DMA mode. A recipient shall be able to receive data at the minimum
period specified by the enabled Ultra DMA mode.
6.3.2.3 Ultra DMA Burst Termination Phase Rules
1.
2.
3.
4.
5.
6.
7.
8.
9.
Either a sender or a recipient may terminate an Ultra DMA burst.
Ultra DMA burst termination is not the same as command completion. If an Ultra DMA burst
termination occurs before command completion, the command shall be completed by initiation of
a new Ultra DMA burst at some later time or aborted by the host issuing a hardware or software
reset or DEVICE RESET command if implemented by the device.
An Ultra DMA burst shall be paused before a recipient requests a termination.
A host requests a termination by asserting STOP. A device acknowledges a termination request by
negating DMARQ.
A device requests a termination by negating DMARQ. A host acknowledges a termination request by
asserting STOP.
Once a sender requests a termination, the sender shall not change the state of STROBE until the
recipient acknowledges the request. Then, if STROBE is not in the asserted state, the sender shall
return STROBE to the asserted state. No data shall be transferred on this transition of STROBE.
A sender shall return STROBE to the asserted state whenever the sender detects a termination
request from the recipient. No data shall be transferred nor CRC calculated on this edge of DSTROBE.
Once a recipient requests a termination, the responder shall not change DMARDY from the negated
state for the remainder of an Ultra DMA burst.
A recipient shall ignore a STROBE edge when DMARQ is negated or STOP is asserted.
Swissbit AG
Industriestrasse 4
Swissbit reserves the right to change products or specifications without notice.
Revision: 1.00
CH-9552 Bronschhofen
Switzerland
www.swissbit.com
industrial@swissbit.com
P-120_data_sheet_PA-QxBO_Rev100.doc
Page 16 of 76
相关PDF资料
PDF描述
3-1437667-3 CONN BARRIER BLK DL 10CIRC .325
SFSA4096Q1BR4TO-I-MS-216-STD FLASH SSD UDMA IND 2.5" 4GB
3-1437667-1 CONN BARRIER STRIP DL 8CIRC .325
SFSA4096Q1BR4TO-I-MS-226-STD FLASH SLC UDMA/MDMA/PIO 4GB
SFPA2048Q1BO2TO-I-MS-223-STD FLASH SSD SMART UDMA 2.5" 2GB
相关代理商/技术参数
参数描述
SFPA4096Q1BO2TO-I-DT-243-STD 制造商:SWISSBIT NA INC 功能描述:FLASH
SFPA-53 制造商:未知厂家 制造商全称:未知厂家 功能描述:Schottky Barrier Diodes
SFPA-63 制造商:SANKEN 制造商全称:Sanken electric 功能描述:Schottky Barrier Diodes (Surface Mount) 30V
SFPA-73 制造商:未知厂家 制造商全称:未知厂家 功能描述:Schottky Barrier Diodes
SFPA8192Q1BO2TO-C-QT-243-STD 制造商:SWISSBIT NA INC 功能描述:FLASH