12
SME5224AUPA-360
360 MHz CPU, 4.0 MB E-Cache
UltraSPARC-II CPU Module
July 1999
Sun Microsystems, Inc
Module Power Consumption
This UltraSPARC-II CPU module requires two supply voltages. The required voltages (provided to the mod-
ule) for the V
DD and VDD_CORE, are respectively 3.3V and 2.6V. The estimated maximum power consumption of
the UltraSPARC–II, 360 MHz CPU, 4.0 Mbyte E-cache module (SME5224AUPA-360) is 64 watts at 360 MHz.
The estimated maximum power consumption includes the CPU, the SRAMs, the clock logic and the 8 watts
consumed by the DC-DC regulator.
DC Characteristics [1]
1. This tables species the DC characteristics for the UPA 128M interconnect bus.
Symbol
Parameter
Conditions
Min
Typ
Max
Units
V
OH
High-level output voltage
V
DD = Min, IOH = Max
2.4
——
V
IH
High-level input voltage, PECL clocks
—
2.28
——
V
High-level input voltage,
except PECL clocks
—
2.0
——
V
IL
Low-level input voltage, PECL clocks
——
—
V
Low-level input voltage,
except PECL clocks
——
—
0.8
V
OL
Low-level output voltage
V
DD = Min, IOL = Max
——
0.4
V
I
DD
Supply current for V
DD
[2] [3]
2. The supply current for the
V
DD includes the supply current for the CPU, UDB-II, and the SRAMs.
3. The typical DC current values represent the current drawn at nominal voltage with a typical, busy computing load. Variations in the
device, computing load, and system implementation affect the actual current. The maximum DC current values will rarely, if ever, be
exceeded running all known computing loads over the entire operating range. The maximum values are based on simulations.
V
DD = Max
—
8.6
11.1
A
I
DD_CORE
Supply current for V
DD_CORE
4. The supply current for the
V
DD_CORE includes the supply current for the CPU, UDB-II, SRAMs, via the DC to DC regulator.
V
DD_CORE = Max
—
9.7
10.7
A
I
OZ
High-impedance output current
(Outputs without pull-ups)
V
DD = Max, VO = 0.4V to 2.4V
—
± 30
A
High-impedance output current
(Outputs with pull-ups)
V
DD = Max, VO = VSS to VDD
——
250
A
I
Input current (inputs without pull-ups)
V
DD = Max, VI = VSS to VDD
——
± 20
A
Input current (inputs with pull-ups)
V
DD = Max, VI = VSS to VDD
——
-250
A
I
OH
High level output current
—
4.0
——
mA
I
OL
Low level output current
—
8.0
—
–mA