参数资料
型号: STR635FZ1T6
厂商: STMICROELECTRONICS
元件分类: 微控制器/微处理器
英文描述: 32-BIT, FLASH, 36 MHz, RISC MICROCONTROLLER, PQFP144
封装: 20 X 20 MM, TQFP-144
文件页数: 48/51页
文件大小: 1485K
代理商: STR635FZ1T6
Introduction
STR73xF
6/51
1.2
On-Chip Peripherals
CAN Interfaces
The three CAN modules are compliant with the CAN specification V2.0 part B (active). The
bit rate can be programmed up to 1 MBaud. These are not available in the STR735 and
STR736.
DMA
4 DMA controllers, each with 4 data streams manage memory to memory, peripheral to
peripheral, peripheral to memory and memory to peripheral transfers. The DMA requests
are connected to TIM timers, BSPI0, BSPI1, BSPI2 and ADC. One of the streams can be
configured to be triggered by a software request, independently from any peripheral activity.
16-bit Timers (TIM)
Each of the ten timers (six in 100-pin devices) have a 16-bit free-running counter with 7-bit
prescaler, up to two input capture/output compare functions, a pulse counter function, and a
PWM channel with selectable frequency. This provides a total of 16 independent PWMs (12
in 100-pin devices) when added with the PWM modules (see next paragraph).
PWM Modules (PWM)
The six 16-bit PWM modules have independently programmable periods and duty-cycles,
with 5+3 bit prescaler factor.
Timebase Timers (TB)
The three 16-bit Timebase Timers with 8-bit prescaler for general purpose time triggering
operations.
Realtime Clock (RTC)
The RTC provides a set of continuously running counters driven by separate clock signal
derived from the main oscillator. The RTC can be used as a general timebase or
clock/calendar/alarm function. When the STR73xF is in LPWFI mode the RTC keeps
running, powered by the low power voltage regulator.
UARTs
The 4 UARTs allow full duplex, asynchronous, communications with external devices with
independently programmable TX and RX baud rates up to 625K baud.
Buffered Serial Peripheral Interfaces (BSPI)
Each of the three BSPIs allow full duplex, synchronous communications with external
devices, master or slave communication at up 6 Mb/s (@36 MHz System Clock).
I2C Interfaces
The two I2C Interfaces provide multi-master and slave functions, support normal and fast
I2C mode (400 kHz) and 7 or 10-bit addressing modes.
A/D Converter
The 10-bit Analog to Digital Converter, converts up to 16 channels in single-shot or
continuous conversion modes (12 channels in 100-pin devices). The minimum conversion
time is 3us.
相关PDF资料
PDF描述
STR636FV0T6 32-BIT, FLASH, 36 MHz, RISC MICROCONTROLLER, PQFP100
STR735FZ1H6 32-BIT, FLASH, 36 MHz, RISC MICROCONTROLLER, PBGA144
ST72F325K6TCXS MICROCONTROLLER, PQFP32
ST72P325R7TA/XXXRS MICROCONTROLLER, PQFP64
ST7FL35F2UAXE 8-BIT, FLASH, 8 MHz, MICROCONTROLLER, QCC20
相关代理商/技术参数
参数描述
STR7000 制造商:SANKEN 制造商全称:Sanken electric 功能描述:Separate Excitation Switching Type
STR7001 制造商:SANKEN 制造商全称:Sanken electric 功能描述:Separate Excitation Switching Type
STR7001+SI-8020 制造商:SANKEN 制造商全称:Sanken electric 功能描述:Separate Excitation Switching Type
STR7002 制造商:SANKEN 制造商全称:Sanken electric 功能描述:Separate Excitation Switching Type
STR7002+SI-8021 制造商:SANKEN 制造商全称:Sanken electric 功能描述:Separate Excitation Switching Type