- 您现在的位置：买卖IC网 > PDF目录85413 > TDA8960HB (NXP SEMICONDUCTORS) SPECIALTY CONSUMER CIRCUIT, PQFP64 PDF资料下载
参数资料
| 型号： | TDA8960HB |
| 厂商： | NXP SEMICONDUCTORS |
| 元件分类： | 消费家电 |
| 英文描述： | SPECIALTY CONSUMER CIRCUIT, PQFP64 |
| 封装： | PLASTIC, SOT-319, QFP-64 |
| 文件页数： | 9/36页 |
| 文件大小： | 203K |
| 代理商： | TDA8960HB |
第1页第2页第3页第4页第5页第6页第7页第8页当前第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页
1999 Jun 14
17
Philips Semiconductors
Preliminary specication
ATSC 8-VSB demodulator and decoder
TDA8960
ADDRESSING THE DEVICE
Addressing the VSB demodulator over the system the
I2C-bus requires that the 7-bit slave address (A6 to A0) of
the device is sent over the bus in accordance with the
protocols, together with the R/W bit equal to logic 1 or 0 to
write or read data respectively.
The slave address of the device is shown in Table 9. Bits
0 to 6 are predefined, but bits 0 and 1 can be set using the
external pins A0 and A1.
Table 9
Slave address
A6
A5
A4
A3
A2
A1
A0
R/W
00011
A1
A0
0 = write
1 = read
Fig.8 A master-transmitter addresses a slave receiver with a 7-bit address (write access).
(5) A = acknowledge (SDA LOW)
(6) A = not acknowledge (SDA HIGH)
(7) P = STOP condition
(8) Data transferred (n bytes + acknowledge).
(1) From master to slave
(2) S = START condition
(3) Logic 0 (write)
(4) From slave to master
handbook, full pagewidth
MGR607
S
A
DATA
A
(8)
DATA
P
SLAVE ADDRESS
(1)(2)
(1)(3)
(4)(5)
(1)
(4)(5)
(4)(5)(6)
(1)
(1)(7)
(1)
R/W
A/A
A write operation is shown in Fig.8. After the START
condition, the slave address followed by the R/W bit is
transmitted. The receiver, the TDA8960, sends an
acknowledge and the transmitter starts sending the
register values. After each received byte, the TDA8960
sends an acknowledge. The transfer stops if the TDA8960
does not acknowledge the transfer and/or the master
sends a STOP condition.
If register 08H has to be written to, eight consecutive bytes
are written. The first corresponds to register 01H, the
second to 02H and so on. The TDA8960 will
auto-increment the accessed address automatically. Up to
ten consecutive addresses can be written.
In Table 11 the default values are given for a number of
reserved addresses and reserved bits of certain
addresses. These correct default values have to be written
in order to prevent unexpected behaviour of the IC.
Figure 9 shows a read operation. The master sends a
START condition followed by the slave address and the
R/W bit is set to logic 1. The slave returns an acknowledge
followed by the value of the first address. The master
sends another acknowledge and the next value of the
address is returned. If the master transmits a STOP
condition after the acknowledge, the transfer is stopped.
Up to three consecutive addressed (00H to 03H) can be
read.
相关PDF资料 |
PDF描述 |
|---|---|
| TDA8315T/N3 | COLOR SIGNAL DECODER, PDSO24 |
| TDA8315TD-G | COLOR SIGNAL DECODER, PDSO24 |
| TA8601BN | SPECIALTY CONSUMER CIRCUIT, PDIP36 |
| TA8631N | SPECIALTY CONSUMER CIRCUIT, PDIP30 |
| TDA6405ATS/C1 | VIDEO TUNER, PDSO28 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TDA8961 | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:ATSC/NTSC digital TV front-end chipset |
| TDA8980 | 制造商:PHILIPS 制造商全称:NXP Semiconductors 功能描述:ATSC/NTSC digital TV front-end chipset |
| TDA9032 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:tda9032 |
| TDA9045 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:VIDEO PROCESSOR AND INPUT SELECTOR |
| TDA9102 | 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:H/V PROCESSOR FOR TTL V.D.U |
发布紧急采购，3分钟左右您将得到回复。