- 您现在的位置：买卖IC网 > PDF目录19987 > TPS23757PW (Texas Instruments)IC CTRLR POE PD IEEE 20TSSOP PDF资料下载
参数资料
| 型号： | TPS23757PW |
| 厂商： | Texas Instruments |
| 文件页数： | 15/39页 |
| 文件大小： | 0K |
| 描述： | IC CTRLR POE PD IEEE 20TSSOP |
| 标准包装： | 70 |
| 类型： | 以太网供电开关（PoE） |
| 应用： | 远程外设（工业控制，相机，数据访问） |
| 内部开关： | 是 |
| 电流限制： | 465mA |
| 电源电压： | 0 V ~ 57 V |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 20-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 20-TSSOP |
| 包装： | 管件 |
| 产品目录页面： | 1012 (CN2011-ZH PDF) |
| 其它名称： | 296-24949-5 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页当前第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页
TPS23757
www.ti.com
SLVS948D – JULY 2009 – REVISED NOVEMBER 2013
DETAILED DESCRIPTION
PoE OVERVIEW
The following text is intended as an aid in understanding the operation of the TPS23757 but not as a substitute
for the IEEE 802.3at standard. The IEEE 802.3at standard is an update to IEEE 802.3-2008 clause 33 (PoE),
adding high-power options and enhanced classification. Generally speaking, a device compliant to IEEE 802.3-
2008 will be referred to as a type 1 device (PD or PSE), and devices with high power and enhanced
classification will be referred to as type 2 devices (PD or PSE). Standards change and should always be
referenced when making design decisions. The TPS23757 supports type 1 PDs as a result of the limited-current
capability and lack of type 2 hardware class detection. Type 1 devices are encompassed within the new
standard, providing the same features and functions as devices in service since 2003.
The IEEE 802.3at standard defines a method of safely powering a PD over a cable by power sourcing equipment
(PSE), and then removing power if a PD is disconnected. The process proceeds through an idle state and three
states of detection, classification, and operation. The PSE leaves the cable unpowered (idle state) while it
periodically looks to see if something has been plugged in; this is referred to as detection. The low power levels
used during detection are unlikely to damage devices not designed for PoE. If a valid PD signature is present,
the PSE my inquire how much power the PD requires; this is referred to as classification. The PSE may then
power the PD if it has adequate capacity.
Type 2 PSEs are required to do type 1 hardware classification plus a (new) data-layer classification, or an
enhanced type 2 hardware classification. Type 1 PSEs are not required to do hardware or data link layer (DLL)
classification. A type 2 PD must do type 2 hardware classification as well as DLL classification. A type 1 PD may
have passive classification ( class 0, < 5 mA) or active type 1 hardware class (1 through 3) per IEEE 802.3-2008.
DLL communication occurs after power-on and the ethernet data link has been established by the applications
circuits in the PD (not the power interface). It may be used by type 1 PDs and must be implemented by type 2
PDs.
Once started, the PD must present the maintain power signature (MPS) to assure the PSE that it is still present.
The PSE monitors its output for a valid MPS, and turns the port off if it loses the MPS. Loss of the MPS returns
the PSE to the idle state. Figure 18 shows the operational states as a function of PD input voltage. The upper
half is for IEEE 802.3-2008, and the lower half shows specific differences for IEEE 802.3at. The dashed lines in
the lower half indicate these are the same (e.g., detect and class) for both.
Detect
6.9
Classify
Shut-
down
Normal Operation
42.5
0
2.7
10.1 14.5
20.5
30
37
42
57 PI Voltage (V)
Mark
Normal Operation
Figure 18. Operational States for PD
Copyright ? 2009–2013, Texas Instruments Incorporated
Submit Documentation Feedback
15
相关PDF资料 |
PDF描述 |
|---|---|
| R2S8-0509/P | CONV DC/DC 2W 5VIN 9VOUT SMD |
| 5650090-1 | AMP .050 CL CEC 56 DUAL POS |
| GRM188R71H471KA01D | CAP CER 470PF 50V 10% X7R 0603 |
| VE-J5V-CY-B1 | CONVERTER MOD DC/DC 5.8V 50W |
| ISL9021AIRUKZ-T7A | IC REG LDO 2.85V .25A 6UTDFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TPS23757PWR | 功能描述:热插拔功率分布 Hi Eff PoE Interface & DC/DC Controller RoHS:否 制造商:Texas Instruments 产品:Controllers & Switches 电流限制: 电源电压-最大:7 V 电源电压-最小:- 0.3 V 工作温度范围: 功率耗散: 安装风格:SMD/SMT 封装 / 箱体:MSOP-8 封装:Tube |
| TPS2375D | 功能描述:热插拔功率分布 IEEE 802.3af PoE Pwr Device Cntrler RoHS:否 制造商:Texas Instruments 产品:Controllers & Switches 电流限制: 电源电压-最大:7 V 电源电压-最小:- 0.3 V 工作温度范围: 功率耗散: 安装风格:SMD/SMT 封装 / 箱体:MSOP-8 封装:Tube |
| TPS2375D | 制造商:Texas Instruments 功能描述:POWER OVER ETHERNET ((NW)) |
| TPS2375DG4 | 功能描述:热插拔功率分布 IEEE 802.3af PoE Pwr Device Cntrler RoHS:否 制造商:Texas Instruments 产品:Controllers & Switches 电流限制: 电源电压-最大:7 V 电源电压-最小:- 0.3 V 工作温度范围: 功率耗散: 安装风格:SMD/SMT 封装 / 箱体:MSOP-8 封装:Tube |
| TPS2375DR | 功能描述:热插拔功率分布 IEEE 802.3af PoE Pwr Device Cntrler RoHS:否 制造商:Texas Instruments 产品:Controllers & Switches 电流限制: 电源电压-最大:7 V 电源电压-最小:- 0.3 V 工作温度范围: 功率耗散: 安装风格:SMD/SMT 封装 / 箱体:MSOP-8 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。