参数资料
| 型号： | TPS54260DRCR |
| 厂商： | Texas Instruments |
| 文件页数： | 22/52页 |
| 文件大小： | 0K |
| 描述： | IC REG BUCK ADJ 2.5A 10SON |
| 标准包装： | 3,000 |
| 系列： | SWIFT™, Eco-Mode™ |
| 类型： | 降压（降压） |
| 输出类型： | 可调式 |
| 输出数： | 1 |
| 输出电压： | 0.8 V ~ 58 V |
| 输入电压： | 3.5 V ~ 60 V |
| PWM 型： | 电流模式 |
| 频率 - 开关： | 100kHz ~ 2.5MHz |
| 电流 - 输出： | 2.5A |
| 同步整流器： | 无 |
| 工作温度： | -40°C ~ 150°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 10-VFDFN 裸露焊盘 |
| 包装： | 带卷 (TR) |
| 供应商设备封装： | 10-SON 裸露焊盘（3x3） |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页当前第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页
SLVSA86A – MARCH 2010 – REVISED DECEMBER 2010
www.ti.com
DETAILED DESCRIPTION (continued)
How to Interface to RT/CLK Pin
The RT/CLK pin can be used to synchronize the regulator to an external system clock. To implement the
synchronization feature connect a square wave to the RT/CLK pin through the circuit network shown in
Figure 41 . The square wave amplitude must transition lower than 0.5V and higher than 2.2V on the RT/CLK pin
and have an on time greater than 40 ns and an off time greater than 40 ns. The synchronization frequency range
is 300 kHz to 2200 kHz. The rising edge of the PH will be synchronized to the falling edge of RT/CLK pin signal.
The external synchronization circuit should be designed in such a way that the device will have the default
frequency set resistor connected from the RT/CLK pin to ground should the synchronization signal turn off. It is
recommended to use a frequency set resistor connected as shown in Figure 41 through a 50 ? resistor to
ground. The resistor should set the switching frequency close to the external CLK frequency. It is recommended
to ac couple the synchronization signal through a 10 pF ceramic capacitor to RT/CLK pin and a 4k ? series
resistor. The series resistor reduces PH jitter in heavy load applications when synchronizing to an external clock
and in applications which transition from synchronizing to RT mode. The first time the CLK is pulled above the
CLK threshold the device switches from the RT resistor frequency to PLL mode. The internal 0.5V voltage source
is removed and the CLK pin becomes high impedance as the PLL starts to lock onto the external signal. Since
there is a PLL on the regulator the switching frequency can be higher or lower than the frequency set with the
external resistor. The device transitions from the resistor mode to the PLL mode and then will increase or
decrease the switching frequency until the PLL locks onto the CLK frequency within 100 microseconds.
When the device transitions from the PLL to resistor mode the switching frequency will slow down from the CLK
frequency to 150 kHz, then reapply the 0.5V voltage and the resistor will then set the switching frequency. The
switching frequency is divided by 8, 4, 2, and 1 as the voltage ramps from 0 to 0.8 volts on VSENSE pin. The
device implements a digital frequency shift to enable synchronizing to an external clock during normal startup
and fault conditions. Figure 42 , Figure 43 and Figure 44 show the device synchronized to an external system
clock in continuous conduction mode (ccm) discontinuous conduction (dcm) and pulse skip mode (psm).
TPS54260
10 pF
4 k W
R fset
PLL
EXT
Clock
50 W
RT/CLK
Source
Figure 41. Synchronizing to a System Clock
22
Product Folder Link(s): TPS54260
Copyright ? 2010, Texas Instruments Incorporated
相关PDF资料 |
PDF描述 |
|---|---|
| TPS54326RGTT | IC REG BUCK SYNC ADJ 3A 16QFN |
| TPS54478RTER | IC REG BUCK SYNC ADJ 4A 16WQFN |
| TPS54550PWPG4 | IC REG BUCK SYNC ADJ 6A 16HTSSOP |
| TPS54678RTER | IC REG BUCK SYNC ADJ 6A 16WQFN |
| TPS54900PWRG4 | IC REG BUCK ADJ .1A QUAD 16TSSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| TPS54260DRCT | 功能描述:直流/直流开关转换器 3.5V-60Vin,2.5A,2.5 MHz Step Down SWIFT RoHS:否 制造商:STMicroelectronics 最大输入电压:4.5 V 开关频率:1.5 MHz 输出电压:4.6 V 输出电流:250 mA 输出端数量:2 最大工作温度:+ 85 C 安装风格:SMD/SMT |
| TPS54260EVM-597 | 功能描述:电源管理IC开发工具 2.5A,10.8-13.2Vin SWIFT Conv Eval Mod RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V |
| TPS54260MDGQTEP | 功能描述:IC REG BUCK ADJ 2.5A 10MOSP 制造商:texas instruments 系列:Eco-Mode? 包装:剪切带（CT） 零件状态:在售 功能:降压 输出配置:正 拓扑:降压 输出类型:可调式 输出数:1 电压 - 输入（最小值）:3.5V 电压 - 输入（最大值）:60V 电压 - 输出（最小值/固定）:0.8V 电压 - 输出（最大值）:60V 电流 - 输出:2.5A 频率 - 开关:100kHz ~ 2.5MHz 同步整流器:无 工作温度:-40°C ~ 150°C（TJ） 安装类型:表面贴装 封装/外壳:10-TFSOP，10-MSOP（0.118"，3.00mm 宽）裸露焊盘 供应商器件封装:10-MSOP-PowerPad 标准包装:1 |
| TPS54260MDRCTEP | 功能描述:IC REG BUCK ADJ 2.5A 10VSON 制造商:texas instruments 系列:Eco-Mode? 包装:剪切带（CT） 零件状态:在售 功能:降压 输出配置:正 拓扑:降压 输出类型:可调式 输出数:1 电压 - 输入（最小值）:3.5V 电压 - 输入（最大值）:60V 电压 - 输出（最小值/固定）:0.8V 电压 - 输出（最大值）:60V 电流 - 输出:2.5A 频率 - 开关:100kHz ~ 2.5MHz 同步整流器:无 工作温度:-40°C ~ 150°C（TJ） 安装类型:表面贴装 封装/外壳:10-VFDFN 裸露焊盘 供应商器件封装:10-VSON（3x3） 标准包装:1 |
| TPS54260-Q1 | 制造商:TI 制造商全称:Texas Instruments 功能描述:3.5 V to 60 V STEP DOWN CONVERTER WITH ECO-MODEa?￠ |
发布紧急采购，3分钟左右您将得到回复。