参数资料
型号: V85C2256164SAS8
厂商: MOSEL-VITELIC
元件分类: DRAM
英文描述: 16M X 16 DDR DRAM, 0.8 ns, PBGA60
封装: 0.80 X 1 MM PITCH, SOC, BGA-60
文件页数: 22/61页
文件大小: 814K
代理商: V85C2256164SAS8
29
MOSEL VITELIC
V58C2256(804/404/164)S
V58C2256(804/404/164)S Rev. 1.4 October 2002
TRUTH TABLE 3 – Current State Bank n - Command to Bank n
(Notes: 1-6; notes appear below and on next page)
NOTE:
1. This table applies when CKEn-1 was HIGH and CKEn is HIGH (see Truth Table 2) and after
tXSR
has been met (if the previous state was self refresh).
2. This table is bank-specific, except where noted, i.e., the current state is for a specific bank and the commands shown
are those allowed to be issued to that bank when in that state. Exceptions are covered in the notes below.
3. Current state definitions:
Idle: The bank has been precharged, and tRP has been met.
Row Active: A row in the bank has been activated, and tRCD has been met.
No data bursts/accesses and no register accesses are in progress.
Read: A READ burst has been initiated, with AUTO PRECHARGE disabled,
and has not yet terminated or been terminated.
Write: A WRITE burst has been initiated, with AUTO PRECHARGE disabled,
and has not yet terminated or been terminated.
4. The following states must not be interrupted by a command issued to the same bank. DESELECT or NOP com-
mands,
or allowable commands to the other bank should be issued on any clock edge occurring during these states.
Allowable commands to the other bank are determined by its current state and Truth Table 3, and according to
Truth Table 4.
Precharging: Starts with registration of a PRECHARGE command and ends when tRP is
met. Once tRP is met, the bank will be in the idle state.
CURRENT STATE
/CS
/RAS
/CAS
/WE
COMMAND/ACTION
NOTES
Any
H
X
DESELECT (NOP/continue previous operation)
L
H
NO OPERATION (NOP/continue previous operation)
Idle
L
H
ACTIVE (select and activate row)
LLLH
AUTO REFRESH
7
L
MODE REGISTER SET
7
Row Active
L
H
L
H
READ (select column and start READ burst)
10
L
H
L
WRITE (select column and start WRITE burst)
10
L
H
L
PRECHARGE (deactivate row in bank or banks)
8
Read (Auto Precharge
Disabled)
L
H
L
H
READ (select column and start new READ burst)
10
L
H
L
PRECHARGE (truncate READ burst, start PRECHARGE)
8
L
H
L
BURST TERMINATE
9
Write (Auto Precharge
Disabled)
L
H
L
H
READ (select column and start READ burst)
10, 11
L
H
L
WRITE (select column and start new WRITE burst)
10
L
H
L
PRECHARGE (truncate WRITE burst, start PRECHARGE)
8, 11
相关PDF资料
PDF描述
V85FACCBAFREQ VCXO, CLOCK, 1.5 MHz - 200 MHz, HCMOS OUTPUT
V85GBAAA155.520MHZ VCXO, CLOCK, 155.52 MHz, PECL OUTPUT
V85GAABA001.500MHZ VCXO, CLOCK, 1.5 MHz, PECL OUTPUT
V85GABAA155.520MHZ VCXO, CLOCK, 155.52 MHz, PECL OUTPUT
V85GABAB155.520MHZ VCXO, CLOCK, 155.52 MHz, LVDS OUTPUT
相关代理商/技术参数
参数描述
V85ES00C-GZCY8-1Z1-XPN1 制造商:Carling Technologies 功能描述:V-SERIES ROCKER SWITCH - Bulk
V85MLA1210 制造商:LITTELFUSE 制造商全称:Littelfuse 功能描述:Multilayer Transient Voltage Surge Suppressors
V85MLA1210A 功能描述:压敏电阻 85V 250A 260pF RoHS:否 制造商:EPCOS 产品:MLV 电压额定值 DC:22 V 电压额定值 AC:17 V 钳位电压:50 V 直径: 峰值浪涌电流:30 A 浪涌能量额定值:75 mJ 电容:74.2 pF 工作温度范围:- 55 C to + 125 C 安装:SMD/SMT 封装:Reel
V85MLA1210H 功能描述:压敏电阻 85V 250A 260pF RoHS:否 制造商:EPCOS 产品:MLV 电压额定值 DC:22 V 电压额定值 AC:17 V 钳位电压:50 V 直径: 峰值浪涌电流:30 A 浪涌能量额定值:75 mJ 电容:74.2 pF 工作温度范围:- 55 C to + 125 C 安装:SMD/SMT 封装:Reel
V85MLA1210H 制造商:Littelfuse 功能描述:Metal Oxide Varistor (MOV)