参数资料
| 型号： | AD2S1210BSTZ |
| 厂商： | Analog Devices Inc |
| 文件页数： | 14/36页 |
| 文件大小： | 0K |
| 描述： | IC CONV R/D 10-16BIT 48-LQFP |
| 标准包装： | 1 |
| 类型： | R/D 转换器 |
| 分辨率（位）： | 10，12，14，16 b |
| 数据接口： | 串行，并联 |
| 电压电源： | 模拟和数字 |
| 电源电压： | 4.75 V ~ 5.25 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 48-LQFP |
| 供应商设备封装： | 48-LQFP（7x7） |
| 包装： | 托盘 |
| 产品目录页面： | 790 (CN2011-ZH PDF) |
| 配用： | EVAL-AD2S1210EDZ-ND - BOARD EVAL AD2S1210 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页当前第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页
AD2S1210
Rev. A | Page 21 of 36
REGISTER MAP
Table 10. Register Map
Register Name
Register
Address
Register
Data
Read/Write
Register
Position
0x80
D15 to D8
Read only
0x81
D7 to D0
Read only
Velocity
0x82
D15 to D8
Read only
0x83
D7 to D0
Read only
LOS Threshold
0x88
D7 to D0
Read/write
DOS Overrange
Threshold
0x89
D7 to D0
Read/write
DOS Mismatch
Threshold
0x8A
D7 to D0
Read/write
DOS Reset Max
Threshold
0x8B
D7 to D0
Read/write
DOS Reset Min
Threshold
0x8C
D7 to D0
Read/write
LOT High Threshold
0x8D
D7 to D0
Read/write
LOT Low Threshold
0x8E
D7 to D0
Read/write
Excitation Frequency
0x91
D7 to D0
Read/write
Control
0x92
D7 to D0
Read/write
Soft Reset
0xF0
D7 to D0
Write only
Fault
0xFF
D7 to D0
Read only
POSITION REGISTER
Table 11. 16-Bit Register
Address
Bit
Read/Write
0x80
D15 to D8
Read only
0x81
D7 to D0
Read only
The position register contains a digital representation of the
angular position of the resolver input signals. The values are
stored in 16-bit binary format. The value in the position register
is updated following a falling edge on the SAMPLE input.
Note that with hysteresis enabled (see the Control Register section),
at lower resolutions, the LSBs of the 16-bit digital output are set to
zero. For example, at 10-bit resolution, Data Bit D15 to Data Bit D6
provide valid data; D5 to D0 are set to zero. With hysteresis dis-
abled, the value stored in the position register is 16 bits regardless
of resolution. At lower resolutions, the LSBs of the 16-bit digital
output can be ignored. For example, at 10-bit resolution, Data
Bit D15 to Data Bit D6 provide valid data; D5 to D0 can be
ignored.
VELOCITY REGISTER
Table 12. 16-Bit Register
Address
Bit
Read/Write
0x82
D15 to D8
Read only
0x83
D7 to D0
Read only
The velocity register contains a digital representation of the angular
velocity of the resolver input signals. The value in the velocity
register is updated following a falling edge on the sample input.
The values are stored in 16-bit, twos complement format. The
maximum velocity that the AD2S1210 can track for each
resolution is specified in Table 1. For example, the maximum
tracking rate of the AD2S1210 at 16 bits resolution, with an
8.192 MHz input clock, is ±125 rps. A velocity of +125 rps
results in 0x7FFF being stored in the velocity register; a velocity
of 125 rps results in 0x8000 being stored in the velocity register.
The value stored in the velocity register is 16 bits regardless of
resolution. At lower resolutions, the LSBs of the 16-bit digital
output should be ignored. For example, at 10-bit resolution,
Data Bit D15 to Data Bit D6 provide valid data; D5 to D0 should
be ignored. The maximum tracking rate of the AD2S1210 at
10-bit resolution with an 8.192 MHz input clock is ±2500 rps.
A velocity of +2500 rps results in 0x1FF being stored in Bit D15 to
Bit D6 of the velocity register; a velocity of 2500 rps results in
0x3FF being stored in Bit D15 to Bit D6 of the velocity register. In
this 10-bit example, the LSB size of the velocity output is 4.88 rps.
LOS THRESHOLD REGISTER
Table 13. 8-Bit Register
Address
Bit
Read/Write
0x88
D7 to D0
Read/write
The LOS threshold register determines the loss of signal threshold
of the AD2S1210. The AD2S1210 allows the user to set the LOS
threshold to a value between 0 V and 4.82 V. The resolution of
the LOS threshold is seven bits, that is, 38 mV. Note that the MSB,
D7, should be set to 0. The default value of the LOS threshold
on power-up is 2.2 V.
DOS OVERRANGE THRESHOLD REGISTER
Table 14. 8-Bit Register
Address
Bit
Read/Write
0x89
D7 to D0
Read/write
The DOS overrange threshold register determines the degradation
of signal threshold of the AD2S1210. The AD2S1210 allows the
user to set the DOS overrange threshold to a value between 0 V
and 4.82 V. The resolution of the DOS overrange threshold is
seven bits, that is, 38 mV. Note that the MSB, D7, should be set to
0. The default value of the DOS overrange threshold on power-up
is 4.1 V.
DOS MISMATCH THRESHOLD REGISTER
Table 15. 8-Bit Register
Address
Bit
Read/Write
0x8A
D7 to D0
Read/write
The DOS mismatch threshold register determines the signal
mismatch threshold of the AD2S1210. The AD2S1210 allows
the user to set the DOS mismatch threshold to a value between
0 V and 4.82 V. The resolution of the DOS mismatch threshold
is seven bits, that is, 38 mV. Note that the MSB, D7, should be
set to 0.The default value of the DOS mismatch threshold on
power-up is 380 mV.
相关PDF资料 |
PDF描述 |
|---|---|
| V110A24M300B | CONVERTER MOD DC/DC 24V 300W |
| AD7606BSTZ-6 | IC DAS W/ADC 16BIT 6CH 64LQFP |
| AD2S1210CSTZ | IC CONV R/D VAR RES OSC 48-LQFP |
| VI-24P-MY-S | CONVERTER MOD DC/DC 13.8V 50W |
| AD7607BSTZ | IC DAS W/ADC 14BIT 8CH 64LQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD2S1210BSTZ-DASSAULT | 制造商:Analog Devices 功能描述: |
| AD2S1210CSTZ | 功能描述:IC CONV R/D VAR RES OSC 48-LQFP RoHS:是 类别:集成电路 (IC) >> 数据采集 - ADCs/DAC - 专用型 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:50 系列:- 类型:数据采集系统（DAS） 分辨率（位）:16 b 采样率（每秒）:21.94k 数据接口:MICROWIRE?，QSPI?，串行，SPI? 电压电源:模拟和数字 电源电压:1.8 V ~ 3.6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:40-WFQFN 裸露焊盘 供应商设备封装:40-TQFN-EP（6x6） 包装:托盘 |
| AD2S1210DSTZ | 功能描述:IC CONV R/D VAR RES OSC 48LQFP RoHS:是 类别:集成电路 (IC) >> 数据采集 - ADCs/DAC - 专用型 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:50 系列:- 类型:数据采集系统（DAS） 分辨率（位）:16 b 采样率（每秒）:21.94k 数据接口:MICROWIRE?，QSPI?，串行，SPI? 电压电源:模拟和数字 电源电压:1.8 V ~ 3.6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:40-WFQFN 裸露焊盘 供应商设备封装:40-TQFN-EP（6x6） 包装:托盘 |
| AD2S1210DSTZ | 制造商:Analog Devices 功能描述:IC, ADC, 16BIT, PARALLEL, SERIAL, LQFP-4 |
| AD2S1210SST-EP-RL7 | 功能描述:模数转换器 - ADC IC 10-16 Bit R/D Cnvtr w/Ref Oscilltr RoHS:否 制造商:Analog Devices 通道数量: 结构: 转换速率: 分辨率: 输入类型: 信噪比: 接口类型: 工作电源电压: 最大工作温度: 安装风格: 封装 / 箱体: |
发布紧急采购，3分钟左右您将得到回复。