- 您现在的位置：买卖IC网 > PDF目录1985 > AD7949BCPZRL7 (Analog Devices Inc)IC ADC 14BIT 250KSPS 8CH 20LFCSP PDF资料下载
参数资料
| 型号： | AD7949BCPZRL7 |
| 厂商： | Analog Devices Inc |
| 文件页数： | 17/32页 |
| 文件大小： | 0K |
| 描述： | IC ADC 14BIT 250KSPS 8CH 20LFCSP |
| 产品培训模块： | Power Line Monitoring |
| 产品变化通告： | Startup Circuitry Design Improvement Change 15/April/2009 |
| 标准包装： | 1,500 |
| 系列： | PulSAR® |
| 位数： | 14 |
| 采样率（每秒）： | 250k |
| 数据接口： | DSP，MICROWIRE?，QSPI?，串行，SPI? |
| 转换器数目： | 1 |
| 功率耗散（最大）： | 15.5mW |
| 电压电源： | 单电源 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 20-VFQFN 裸露焊盘，CSP |
| 供应商设备封装： | 20-LFCSP-VQ |
| 包装： | 带卷 (TR) |
| 输入数目和类型： | * |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页当前第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页
AD7949
Data Sheet
Rev. D | Page 24 of 32
The register can be written to during conversion, during acquisi-
tion, or spanning acquisition/conversion, and is updated at the end
of conversion, tCONV (maximum). There is always a one deep
delay when writing the CFG register. Note that, at power-up, the
CFG register is undefined and two dummy conversions are
required to update the register. To preload the CFG register with a
factory setting, hold DIN high for two conversions. Thus
CFG[13:0] = 0x3FFF. This sets the AD7949 for the following:
IN[7:0] unipolar referenced to GND, sequenced in order
Full bandwidth for a one-pole filter
Internal reference/temperature sensor disabled, buffer
enabled
Enables the internal sequencer
No readback of the CFG register
Table 9 summarizes the configuration register bit details. See
the Theory of Operation section for more details.
13
12
11
10
9
8
7
6
5
4
3
2
1
0
CFG
INCC
INx
BW
REF
SEQ
RB
Table 9. Configuration Register Description
Bit(s)
Name
Description
[13]
CFG
Configuration update.
0 = keep current configuration settings.
1 = overwrite contents of register.
[12:10]
INCC
Input channel configuration. Selection of pseudo bipolar, pseudo differential, pairs, single-ended, or temperature sensor. Refer
to the
Input Configurations section.
Bit 12
Bit 11
Bit 10
Function
0
X1
Bipolar differential pairs; INx referenced to VREF/2 ± 0.1 V.
0
1
0
Bipolar; INx referenced to COM = VREF/2 ± 0.1 V.
0
1
Temperature sensor.
1
0
X1
Unipolar differential pairs; INx referenced to GND ± 0.1 V.
1
0
Unipolar, INx referenced to COM = GND ± 0.1 V.
1
Unipolar, INx referenced to GND.
[9:7]
INx
Input channel selection in binary fashion.
Bit 9
Bit 8
Bit 7
Channel
0
IN0
0
1
IN1
…
1
IN7
[6]
BW
Select bandwidth for low-pass filter. Refer to the
0 = of BW, uses an additional series resistor to further bandwidth limit the noise. Maximum throughput must also be reduced to .
1 = full BW.
[5:3]
REF
Reference/buffer selection. Selection of internal, external, external buffered, and enabling of the on-chip temperature sensor.
Refer to the
Voltage Reference Output/Input section.
Bit 5
Bit 4
Bit 3
Function
0
Internal reference, REF = 2.5 V output, temperature enabled.
0
1
Internal reference, REF = 4.096 V output, temperature enabled.
0
1
0
External reference, temperature enabled.
0
1
External reference, internal buffer, temperature enabled.
1
0
External reference, temperature disabled.
1
External reference, internal buffer, temperature disabled.
[2:1]
SEQ
Channel sequencer. Allows for scanning channels in an IN0 to IN[7:0] fashion. Refer to the
Channel Sequencer section.
Bit 2
Bit 1
Function
0
Disable sequencer.
0
1
Update configuration during sequence.
1
0
Scan IN0 to IN[7:0] (set in CFG[9:7]), then temperature.
1
Scan IN0 to IN[7:0] (set in CFG[9:7]).
[0]
RB
Read back the CFG register.
0 = read back current configuration at end of data.
1 = do not read back contents of configuration.
1
X = don’t care.
相关PDF资料 |
PDF描述 |
|---|---|
| AD7951BSTZRL | IC ADC 14BIT 1MSPS 48-LQFP |
| AD7952BCPZ | IC ADC 14BIT DIFF 1MSPS 48LFCSP |
| AD7980ARMZ | ADC 16BIT 1MSPS LP 10-MSOP |
| AD7982BCPZ-RL | IC ADC 18BIT 1MSPS PULSAR 10LFCS |
| AD7983BCPZ-RL7 | IC ADC 16BIT 1.33MSPS 10LFCSP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AD7949SCPZ-EP-R2 | 功能描述:14 Bit Analog to Digital Converter 8 Input 1 SAR 20-LFCSP-WQ (4x4) 制造商:analog devices inc. 系列:PulSAR? 包装:剪切带（CT） 零件状态:有效 位数:14 采样率（每秒）:256k 输入数:8 输入类型:差分，单端 数据接口:SPI，DSP 配置:MUX-ADC 无线电 - S/H:ADC:- A/D 转换器数:1 架构:SAR 参考类型:外部， 内部 电压 - 电源，模拟:2.3 V ~ 5.5 V 电压 - 电源，数字:2.3 V ~ 5.5 V 特性:温度传感器 工作温度:-55°C ~ 125°C 封装/外壳:20-WFQFN 裸露焊盘，CSP 供应商器件封装:20-LFCSP-WQ（4x4） 标准包装:1 |
| AD7949SCPZ-EP-RL7 | 制造商:Analog Devices 功能描述:ADC Single SAR 250ksps 14-bit Serial 20-Pin LFCSP EP T/R 制造商:Analog Devices 功能描述:8 CH 250KSPS 14BIT ADC IC - Tape and Reel 制造商:Analog Devices 功能描述:IC ADC 14BIT 8CH 250KSPS 20LFCSP 制造商:Analog Devices 功能描述:Analog to Digital Converters - ADC 14-Bit 8CH 250 kSPS 制造商:Analog Devices 功能描述:CONVERTER - ADC |
| AD795 | 制造商:AD 制造商全称:Analog Devices 功能描述:Low Power, Low Noise Precision FET Op Amp |
| AD795_02 | 制造商:AD 制造商全称:Analog Devices 功能描述:Low Power, Low Noise Precision FET Op Amp |
| AD795_09 | 制造商:AD 制造商全称:Analog Devices 功能描述:Low Power, Low Noise Precision FET Op Amp |
发布紧急采购，3分钟左右您将得到回复。