参数资料
型号: AGLE3000V2-FFG484C
元件分类: FPGA
英文描述: FPGA, 75264 CLBS, 3000000 GATES, PBGA484
封装: 23 X 23 MM, 2.23 MM HEIGHT, 1 MM PITCH, FBGA-484
文件页数: 68/156页
文件大小: 5023K
代理商: AGLE3000V2-FFG484C
IGLOOe DC and Switching Characteristics
Ad vance v0.3
2-5
Thermal Characteristics
Introduction
The temperature variable in Actel Designer software refers to the junction temperature, not the
ambient temperature. This is an important distinction because dynamic and static power
consumption cause the chip junction to be higher than the ambient temperature.
EQ 2-1 can be used to calculate junction temperature.
TJ = Junction Temperature = ΔT + TA
EQ 2-1
where:
TA = Ambient Temperature
ΔT = Temperature gradient between junction (silicon) and ambient ΔT = θ
ja * P
θ
ja = Junction-to-ambient of the package. θja numbers are located in Table 2-5.
P = Power dissipation
Figure 2-2 V2 Devices – I/O State as a Function of VCCI and VCC Voltage Levels
Region 1: I/O buffers are OFF
Region 2: I/O buffers are ON.
I/Os are functional (except differential inputs)
but slower because V
CCI
/V
CC
are below
specification. For the same reason, input
buffers do not meet V
IH
/V
IL
levels, and
output buffers do not meet V
OH
/V
OL
levels.
Min V
CCI datasheet specification
voltage at a selected I/O
standard; i.e., 1.14 V,1.425 V, 1.7 V,
2.3 V, or 3.0 V
VCC
VCC = 1.14 V
Region 1: I/O Buffers are OFF
Activation trip point:
Va = 0.85 V ± 0.2 V
Deactivation trip point:
Vd = 0.75 V ± 0.2 V
Activation trip point:
Va = 0.9 V ± 0.15 V
Deactivation trip point:
Vd = 0.8 V ± 0.15 V
VCC = 1.575 V
Region 5: I/O buffers are ON
and power supplies are within
specification.
I/Os meet the entire datasheet
and timer specifications for
speed, V
IH
/V
IL
, V
OH
/V
OL
, etc.
Region 4: I/O
buffers are ON.
I/Os are functional
(except differential
but slower because V
CCI is
below specification. For the
same reason, input buffers do not
meet V
IH
/V
IL
levels, and output
buffers do not meet V
OH
/V
OL
levels.
Region 4: I/O
buffers are ON.
I/Os are functional
(except differential inputs)
where VT can be from 0.58 V to 0.9 V (typically 0.75 V)
VCCI
Region 3: I/O buffers are ON.
I/Os are functional; I/O DC
specifications are met,
but I/Os are slower because
the V
CC
is below specification.
V
CC = VCCI + VT
相关PDF资料
PDF描述
AGOF5S3P-20.00MHZ OCXO, CLOCK, 20 MHz, HCMOS OUTPUT
AH110-89G 50 MHz - 2000 MHz RF/MICROWAVE WIDE BAND MEDIUM POWER AMPLIFIER
AH1464 SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 2.6mm, THROUGH HOLE-STRAIGHT
AH1682 SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 2.65mm, PANEL MOUNT
AH1482 SNAP ACTING/LIMIT SWITCH, SPDT, MOMENTARY, 2.65mm, THROUGH HOLE-STRAIGHT
相关代理商/技术参数
参数描述
AGLE3000V2-FFG896 制造商:ACTEL 制造商全称:Actel Corporation 功能描述:IGLOOe Low-Power Flash FPGAs with Flash Freeze Technology
AGLE3000V2-FFG896ES 制造商:ACTEL 制造商全称:Actel Corporation 功能描述:IGLOOe Low-Power Flash FPGAs with Flash Freeze Technology
AGLE3000V2-FFG896I 制造商:ACTEL 制造商全称:Actel Corporation 功能描述:IGLOOe Low-Power Flash FPGAs with Flash Freeze Technology
AGLE3000V2-FFG896PP 制造商:ACTEL 制造商全称:Actel Corporation 功能描述:IGLOOe Low-Power Flash FPGAs with Flash Freeze Technology
AGLE3000V2-FFGG896 制造商:ACTEL 制造商全称:Actel Corporation 功能描述:IGLOOe Low-Power Flash FPGAs with Flash Freeze Technology