- 您现在的位置：买卖IC网 > Datasheet目录316 > BU9829GUL-WE2 (Rohm Semiconductor)IC EEPROM 16KBIT SPI 9VCSP Datasheet资料下载
参数资料
| 型号： | BU9829GUL-WE2 |
| 厂商： | Rohm Semiconductor |
| 文件页数： | 24/26页 |
| 文件大小： | 0K |
| 描述： | IC EEPROM 16KBIT SPI 9VCSP |
| 标准包装： | 1 |
| 格式 - 存储器： | EEPROMs - 串行 |
| 存储器类型： | EEPROM |
| 存储容量： | 16K (2K x 8) |
| 速度： | 5MHz |
| 接口： | SPI 串行 |
| 电源电压： | 1.6 V ~ 3.6 V |
| 工作温度： | -30°C ~ 85°C |
| 封装/外壳： | 9-UFBGA，WLCSP |
| 供应商设备封装： | 9-VCSP50L1（1.6x1.6） |
| 包装： | 标准包装 |
| 其它名称： | BU9829GUL-WE2DKR |
Datasheet
Notice
● General Precaution
1) Before you use our Products, you are requested to carefully read this document and fully understand its contents.
ROHM shall not be in any way responsible or liable for failure, malfunction or accident arising from the use of any
ROHM’s Products against warning, caution or note contained in this document.
2) All information contained in this document is current as of the issuing date and subject to change without any prior
notice. Before purchasing or using ROHM’s Products, please confirm the latest information with a ROHM sales
representative.
● Precaution on using ROHM Products
1) Our Products are designed and manufactured for application in ordinary electronic equipments (such as AV equipment,
OA equipment, telecommunication equipment, home electronic appliances, amusement equipment, etc.). If you
intend to use our Products in devices requiring extremely high reliability (such as medical equipment, transport
equipment, traffic equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car
accessories, safety devices, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or
serious damage to property (“Specific Applications”), please consult with the ROHM sales representative in advance.
Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way responsible or liable for any
damages, expenses or losses incurred by you or third parties arising from the use of any ROHM’s Products for Specific
Applications.
2)
3)
4)
5)
6)
7)
8)
9)
ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor
products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate
safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which
a failure or malfunction of our Products may cause. The following are examples of safety measures:
[a] Installation of protection circuits or other protective devices to improve system safety
[b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure
Our Products are designed and manufactured for use under standard conditions and not under any special or
extraordinary environments or conditions, as exemplified below. Accordingly, ROHM shall not be in any way
responsible or liable for any damages, expenses or losses arising from the use of any ROHM’s Products under any
special or extraordinary environments or conditions. If you intend to use our Products under any special or
extraordinary environments or conditions (as exemplified below), your independent verification and confirmation of
product performance, reliability, etc, prior to use, must be necessary:
[a] Use of our Products in any types of liquid, including water, oils, chemicals, and organic solvents
[b] Use of our Products outdoors or in places where the Products are exposed to direct sunlight or dust
[c] Use of our Products in places where the Products are exposed to sea wind or corrosive gases, including Cl 2 ,
H 2 S, NH 3 , SO 2 , and NO 2
[d] Use of our Products in places where the Products are exposed to static electricity or electromagnetic waves
[e] Use of our Products in proximity to heat-producing components, plastic cords, or other flammable items
[f] Sealing or coating our Products with resin or other coating materials
[g] Use of our Products without cleaning residue of flux (even if you use no-clean type fluxes, cleaning residue of
flux is recommended); or Washing our Products by using water or water-soluble cleaning agents for cleaning
residue after soldering
[h] Use of the Products in places subject to dew condensation
The Products are not subject to radiation-proof design.
Please verify and confirm characteristics of the final or mounted products in using the Products.
In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse) is applied,
confirmation of performance characteristics after on-board mounting is strongly recommended. Avoid applying power
exceeding normal rated power; exceeding the power rating under steady-state loading condition may negatively affect
product performance and reliability.
De-rate Power Dissipation (Pd) depending on Ambient temperature (Ta). When used in sealed area, confirm the actual
ambient temperature.
Confirm that operation temperature is within the specified range described in the product specification.
ROHM shall not be in any way responsible or liable for failure induced under deviant condition from what is defined in
this document.
Notice - Rev.003
? 2012 ROHM Co., Ltd. All rights reserved.
相关PDF资料 |
PDF描述 |
|---|---|
| BU9832GUL-WE2 | IC EEPROM 8KBIT SPI VCSP50L2 TR |
| BU9833GUL-WE2 | IC EEPROM 2KBIT 100KHZ VCSP50L1 |
| BU9844GUL-WE2 | IC EEPROM 16KBIT 2WIRE VCSP50L1 |
| BU9847GUL-WE2 | IC EEPROM 4KBIT 2WIRE VCSP50L1 |
| BU9880GUL-WE2 | IC EEPROM 64KBIT 2WIRE VCSP50L1 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| BU9831 | 制造商:ROHM 制造商全称:Rohm 功能描述:Non-volatile electronic potentiometer |
| BU9831F | 制造商:ROHM 制造商全称:Rohm 功能描述:Non-volatile electronic potentiometer |
| BU9832GUL-W | 制造商:ROHM 制造商全称:Rohm 功能描述:WL-CSP EEPROM family SPI BUS |
| BU9832GUL-W_10 | 制造商:ROHM 制造商全称:Rohm 功能描述:WL-CSP EEPROM family SPI BUS |
| BU9832GUL-WE2 | 功能描述:电可擦除可编程只读存储器 电可擦除可编程只读存储器 Serial-SPI 8Kb RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
发布紧急采购，3分钟左右您将得到回复。