参数资料
型号: BX80547RE2933CN
厂商: INTEL CORP
元件分类: 微控制器/微处理器
英文描述: 32-BIT, 2930 MHz, MICROPROCESSOR, PBGA775
封装: FLIP CHIP, LGA-775
文件页数: 31/94页
文件大小: 2796K
代理商: BX80547RE2933CN
Datasheet
37
Package Mechanical Specifications
3.2
Processor Component Keep-Out Zones
The processor may contain components on the substrate that define component keep-out zone
requirements. A thermal and mechanical solution design must not intrude into the required keep-
out zones. Decoupling capacitors are typically mounted to either the topside or land-side of the
package substrate. See Figure 3-2 and Figure 3-3 for keep-out zones.
The location and quantity of package capacitors may change due to manufacturing efficiencies but
will remain within the component keep-in.
3.3
Package Loading Specifications
Table 3-1 provides dynamic and static load specifications for the processor package. These
mechanical maximum load limits should not be exceeded during heatsink assembly, shipping
conditions, or standard use condition. Also, any mechanical system or component testing should
not exceed the maximum limits. The processor package substrate should not be used as a
mechanical reference or load-bearing surface for thermal and mechanical solution. The minimum
loading specification must be maintained by any thermal and mechanical solutions.
.
3.4
Package Handling Guidelines
Table 3-2 includes a list of guidelines on package handling in terms of recommended maximum
loading on the processor IHS relative to a fixed substrate. These package handling loads may be
experienced during heatsink removal.
Table 3-1. Processor Loading Specifications
Parameter
Minimum
Maximum
Notes
Static
20 lbf
45 lbf
1, 2, 3
NOTES:
1.
These specifications apply to uniform compressive loading in a direction normal to the processor IHS.
2.
This is the maximum force that can be applied by a heatsink retention clip. The clip must also provide the minimum spec-
ified load on the processor package.
3.
These specifications are based on limited testing for design characterization. Loading limits are for the package only and
do not include the limits of the processor socket.
Dynamic
145 lbf
4.
Dynamic loading is defined as an 11 ms duration average load superimposed on the static load requirement.
Table 3-2. Package Handling Guidelines
Parameter
Maximum Recommended
Notes
Shear
70 lbf
1, 4
NOTES:
1.
A shear load is defined as a load applied to the IHS in a direction parallel to the IHS top surface.
Tensile
25 lbf
2, 4
2.
A tensile load is defined as a pulling load applied to the IHS in a direction normal to the IHS surface.
Torque
35 lbf-in
3, 4
3.
A torque load is defined as a twisting load applied to the IHS in an axis of rotation normal to the IHS top surface.
4.
These guidelines are based on limited testing for design characterization.
相关PDF资料
PDF描述
BX80551PG2800FN 32-BIT, 2800 MHz, MICROPROCESSOR, PBGA775
BX80551PG2800FT 32-BIT, 2800 MHz, MICROPROCESSOR, PBGA775
BX80552360 32-BIT, 3460 MHz, MICROPROCESSOR, CBGA775
BX80552651 32-BIT, 3400 MHz, MICROPROCESSOR, PBGA775
BX80552651T 32-BIT, 3400 MHz, MICROPROCESSOR, PBGA775
相关代理商/技术参数
参数描述
BX80547RE2933CNS L98X 制造商:Intel 功能描述:32BIT MPU BX80547RE2933CN 2.93
BX805499010 制造商:Intel 功能描述:ITANIUM 1.60 GHZ - Boxed Product (Development Kits)
BX805499015 制造商:Intel 功能描述:DUAL-CORE ITANIUM 1.40 GHZ - Boxed Product (Development Kits)
BX805499020 制造商:Intel 功能描述:DUAL-CORE ITANIUM 1.42 GHZ - Boxed Product (Development Kits)
BX805499030 制造商:Intel 功能描述:DUAL-CORE ITANIUM 1.60 GHZ - Boxed Product (Development Kits)