参数资料
型号: CC-ACC-ADD-2443
厂商: Digi International
文件页数: 22/148页
文件大小: 0K
描述: BRD AUDIO ADD-0N CC 2443 KIT
标准包装: 1
Reset
There are 3 reset signals defined, which are routed to the system connector:
?
?
?
?
?
a reset input to the module (RSTIN#)
an output of the reset controller from the module (PWRGOOD)
a reset output from the CPU (RSTOUT#)
RSTIN# signal from the base board is connected to the reset generator device
on the module. At the base board there could be a reset switch connected to
the RSTIN# signal. A 10k pull up resistor is connected to the RSTIN# signal on
the module.
PWRGOOD must be held to low level at least 4 FCLKs to recognize the reset
..................................................................................
signal.
The low active reset of the reset controller is connected to the system via a 470R
series resistor.
RSTOUT# can be used for external device reset control. RSTOUT# is a function of
Watchdog Reset and Software Reset (RSTOUT# = PWRGOOD & WDTRST# &
SW_RESET).
Memory
DDR SDRAM
memory
NAND Flash
memory
www.digiembedded.com
On the module there are two banks provided for DDR SDRAM memory. Both banks can
support a 16-bit mobile DDR memory chip. Bank 1 provides one part of a 16bit DDR
SDRAM in a FBGA60 package, with 1.8V power supply.
Total size of memory is possible from 16MB (only one bank) up to 256MB (128MB each
bank).
Both banks have to be populated with equal devices since they share all control
signals with the exception of their chip selects.These are defined in the bank control
registers BANKCFG and BANKCON1-3 and Refresh Control Register.
NAND Flash memory is provided, as a single Flash device. In order to support NAND
flash boot loader, the S3C2443 is equipped with an internal SRAM buffer called
Steppingstone. When booting, the first 4 KBytes of the NAND flash memory will be
loaded into Steppingstone and the boot code loaded into Steppingstone will be
executed.
Generally, the boot code will copy NAND flash content to DDR-SDRAM. Using hardware
ECC, the NAND flash data validity will be checked. Upon the completion of the copy,
the main program will be executed on the DDR-SDRAM.
Features:
22
相关PDF资料
PDF描述
CC-EVB-FAX KIT EVAL WORLD MODEM II FAX
CC-USB-SR ADAPTER USB TO SOCKET INTRFC
CC-USB232-C10 ADAPTER USB TO RS-232 CABLE
CDB150X-01-Z DEVELOPMENT BOARD FOR CS1501
CDB1601-120W-Z DEVELOPMENT BOARD FOR CS1601
相关代理商/技术参数
参数描述
CC-ACC-DB9C 制造商:Digi International Inc 功能描述:JUMPSTART KIT BASEBOARD AND POWER SUPPLY FOR DIGI CONNECTCOR - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:KIT JUMPSTART FOR WI-9C/9C
CC-ACC-DB9P 制造商:Digi International 功能描述:JUMPSTART KIT BASEBOARD AND POWER SUPPLY FOR DIGI CONNECTCOR - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:KIT JUMPSTART FOR 9P 制造商:Digi International Inc 功能描述:Jumpstart Kit BseBrd and Power Supply
CC-ACC-DB9P-9215 制造商:Digi International 功能描述:JUMPSTART KIT BASEBOARD AND POWER SUPPLY FOR DIGI CONNECTCOR - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:KIT JUMPSTART FOR 9P 9215 制造商:Digi International Inc 功能描述:Jumpstart Kit BseBrd and Power Supply
CC-ACC-DBMX51 制造商:Digi International Inc 功能描述:BOARD DEV CONNECTCORE I.MX51 制造商:Digi International Inc 功能描述:JumpStart Kit Baseboard and Power Supply for ConnectCore Wi-i.MX51 w/o Module
CC-ACC-DBMX-51 制造商:Digi International Inc 功能描述:JUMPSTART KIT BASEBOARD AND POWER SUPPLY FOR DIGI CONNECTCOR - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:KIT JUMPSTART FOR WI-I.MX51