参数资料
型号: CC-ACC-ADD-2443
厂商: Digi International
文件页数: 36/148页
文件大小: 0K
描述: BRD AUDIO ADD-0N CC 2443 KIT
标准包装: 1
On the base board a transformer with 1:1 turns ratio on TX and 1:1 on RX should be
used. For instance, PULSE H11022.
WLAN interface
A/D converter
and touch screen
interface
In addition to the on-module wired Ethernet interface, the ConnectCore Wi-9M 2443
module also provides an integrated 802.11a/b/g WLAN interface. The WLAN interface
is based on the Digi WM500ABG baseband processor and specifically designed for
embedded products with long-term product availability requirements.
The WM500ABG is connected to the S3C2443 processor via the external 16 bit data
bus and RCS4#. To write to the WM500ABG the software has to latch the most
significant word by writing at addr+1 and then write the LSW to adr. The onboard
logic provides a 32 bit cycle to the WM500ABG when addr is accessed. To read the
WM500ABG the software has to read at addr and then read the latched MSW at
addr+1.
The WLAN baseband controller can be reset through GPB3. When this signal is low,
the baseband controller is in reset mode. When high, the controller is active. The
interrupt signal connected to the baseband controller is EINT_15.
Note: Please use HIROSE U.FL-LP-N-2 extraction tool for removing an U.FL cable from
the ConnectCore Wi-9M 2443.
The 10-bit /10-channels CMOS ADC (Analog to Digital Converter) converts the analog
input signal into 10-bit binary digital codes at a maximum conversion rate of 500KSPS
with 2.5MHz A/D converter clock. A/D converter operates with on-chip sample-and-
hold function and power down mode is supported.
The touch screen Interface can control/select pads (ConnectCore 9M 2443, XP, XM,
YP, YM) of the Touch Screen for X, Y position conversion. The touch Screen Interface
provides Touch Screen Pads control logic and ADC interface logic with interrupt
generation.
Features:
www.digiembedded.com
?
?
?
?
?
?
?
?
?
Resolution: 10-bit
Differential linearity error: 1.0 LSB
Integral linearity error: 2.0 LSB
Maximum conversion rate: 500 KSPS
Low power consumption
Power supply voltage: 3.3V
Analog input range: 0 ~ 3.3V
On-chip sample-and-hold function
Normal conversion mode
36
相关PDF资料
PDF描述
CC-EVB-FAX KIT EVAL WORLD MODEM II FAX
CC-USB-SR ADAPTER USB TO SOCKET INTRFC
CC-USB232-C10 ADAPTER USB TO RS-232 CABLE
CDB150X-01-Z DEVELOPMENT BOARD FOR CS1501
CDB1601-120W-Z DEVELOPMENT BOARD FOR CS1601
相关代理商/技术参数
参数描述
CC-ACC-DB9C 制造商:Digi International Inc 功能描述:JUMPSTART KIT BASEBOARD AND POWER SUPPLY FOR DIGI CONNECTCOR - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:KIT JUMPSTART FOR WI-9C/9C
CC-ACC-DB9P 制造商:Digi International 功能描述:JUMPSTART KIT BASEBOARD AND POWER SUPPLY FOR DIGI CONNECTCOR - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:KIT JUMPSTART FOR 9P 制造商:Digi International Inc 功能描述:Jumpstart Kit BseBrd and Power Supply
CC-ACC-DB9P-9215 制造商:Digi International 功能描述:JUMPSTART KIT BASEBOARD AND POWER SUPPLY FOR DIGI CONNECTCOR - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:KIT JUMPSTART FOR 9P 9215 制造商:Digi International Inc 功能描述:Jumpstart Kit BseBrd and Power Supply
CC-ACC-DBMX51 制造商:Digi International Inc 功能描述:BOARD DEV CONNECTCORE I.MX51 制造商:Digi International Inc 功能描述:JumpStart Kit Baseboard and Power Supply for ConnectCore Wi-i.MX51 w/o Module
CC-ACC-DBMX-51 制造商:Digi International Inc 功能描述:JUMPSTART KIT BASEBOARD AND POWER SUPPLY FOR DIGI CONNECTCOR - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:KIT JUMPSTART FOR WI-I.MX51