参数资料
型号: CC-ACC-ADD-2443
厂商: Digi International
文件页数: 65/148页
文件大小: 0K
描述: BRD AUDIO ADD-0N CC 2443 KIT
标准包装: 1
Chapter 2
3.3VDC power
controller - VLIO
Power LEDs
Coin cell for RTC
Current
?
?
?
?
?
The ConnectCore 9M 2443 module supports another external power source:
VLIO. This power source normally comes from a battery and is used in Mobile
application for generating the S3C2443 core voltage. On the ConnectCore 9M
2443 development board, VLIO is selectable by jumper setting onboard
+3.3VDC, or external VLIO.
Two power LEDs are available on the development board, and indicate:
presence of 9-30VDC power supply,
presence of +5V, or
presence of 3.3VDC power supply.
All power LEDs are red.
A 3.0V coin cell should be used on the ConnectCore 9M 2443 development
board for powering the RTC unit on the module.
Measuring the current on the development board allows evaluation of power
measuring option
?
?
?
needed for various board designs.
A current measuring option is implemented by adding a weak resistor in a
series with the power supply that needs to be measured.
Current measurement values might be performed for 3.3VDC, VLIO and VRTC.
Coin cell battery voltage can also be monitored by adding a jumper between
the coincell and the VRTC power supply on the ConnectCore 9M 2443 module.
Reset
JTAG interface
I2C interface
PoE connectors
?
?
?
?
?
?
?
A push-button allows manual reset by connecting RSTIN# to ground. The reset
controller is located on the ConnectCore 9M 2443 module.
The module JTAG interface is supported through a 20-pin Multi-ICE JTAG
connector, which is located on the ConnectCore 9M 2443 development board.
This connector supports RTCK signal (optional).
TRST# signal has a 2.2K pull-down resistor on module. This means a debugger
with push-pull output at TRST# is needed and open drain is not working.
The ConnectCore 9M 2443 module provides access to one I2C channel. 4k7 pull-
ups resistors are used on the module for these signals.
I2C signals are accessible on the 1:1 expansion connectors and on the
dedicated I2C header.
The POE connectors support the PoE Application Module.
65
ConnectCore 9M 2443 & Wi-9M 2443 Hardware Reference
相关PDF资料
PDF描述
CC-EVB-FAX KIT EVAL WORLD MODEM II FAX
CC-USB-SR ADAPTER USB TO SOCKET INTRFC
CC-USB232-C10 ADAPTER USB TO RS-232 CABLE
CDB150X-01-Z DEVELOPMENT BOARD FOR CS1501
CDB1601-120W-Z DEVELOPMENT BOARD FOR CS1601
相关代理商/技术参数
参数描述
CC-ACC-DB9C 制造商:Digi International Inc 功能描述:JUMPSTART KIT BASEBOARD AND POWER SUPPLY FOR DIGI CONNECTCOR - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:KIT JUMPSTART FOR WI-9C/9C
CC-ACC-DB9P 制造商:Digi International 功能描述:JUMPSTART KIT BASEBOARD AND POWER SUPPLY FOR DIGI CONNECTCOR - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:KIT JUMPSTART FOR 9P 制造商:Digi International Inc 功能描述:Jumpstart Kit BseBrd and Power Supply
CC-ACC-DB9P-9215 制造商:Digi International 功能描述:JUMPSTART KIT BASEBOARD AND POWER SUPPLY FOR DIGI CONNECTCOR - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:KIT JUMPSTART FOR 9P 9215 制造商:Digi International Inc 功能描述:Jumpstart Kit BseBrd and Power Supply
CC-ACC-DBMX51 制造商:Digi International Inc 功能描述:BOARD DEV CONNECTCORE I.MX51 制造商:Digi International Inc 功能描述:JumpStart Kit Baseboard and Power Supply for ConnectCore Wi-i.MX51 w/o Module
CC-ACC-DBMX-51 制造商:Digi International Inc 功能描述:JUMPSTART KIT BASEBOARD AND POWER SUPPLY FOR DIGI CONNECTCOR - Boxed Product (Development Kits) 制造商:Digi International Inc 功能描述:KIT JUMPSTART FOR WI-I.MX51