参数资料
型号: DS2151QB
厂商: Maxim Integrated Products
文件页数: 4/60页
文件大小: 0K
描述: IC TXRX T1 1-CHIP 5V LP 44-PLCC
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 26
功能: 单芯片收发器
接口: T1
电路数: 1
电源电压: 4.75 V ~ 5.25 V
电流 - 电源: 65mA
工作温度: 0°C ~ 70°C
安装类型: 表面贴装
封装/外壳: 44-LCC(J 形引线)
供应商设备封装: 44-PLCC(16.59x16.59)
包装: 管件
包括: 警报检测器和发生器,CSU 回路代码发生器和检测器,DSX-1和CSU 线路补偿发生器
产品目录页面: 1429 (CN2011-ZH PDF)
DS2151Q
12 of 60
TCR1: TRANSMIT CONTROL REGISTER 1 (Address = 35 Hex)
(MSB)
(LSB)
LOTCMC
TFPT
TCPT
RBSE
GB7S
TLINK
TBL
TYEL
SYMBOL
POSITION
NAME AND DESCRIPTION
LOTCMC
TCR1.7
Loss Of Transmit Clock Mux Control. Determines whether
the transmit side formatter should switch to the ever present
RCLK if the TCLK input should fail to transition (Figure 1-1).
0 = do not switch to RCLK if TCLK stops
1 = switch to RCLK if TCLK stops
TFPT
TCR1.6
Transmit Framing Pass Through. (See note below.)
0 = Ft or FPS bits sourced internally
1 = Ft or FPS bits sampled at TSER during F-bit time
TCPT
TCR1.5
Transmit CRC Pass Through. (See note below.)
0 = source CRC6 bits internally
1 = CRC6 bits sampled at TSER during F-bit time
RBSE
TCR1.4
Robbed-Bit Signaling Enable. (See note below.)
0 = no signaling is inserted in any channel
1 = signaling is inserted in all channels (the TTR registers can
be used to block insertion on a channel by channel basis)
GB7S
TCR1.3
Global Bit 7 Stuffing. (See note below.)
0 = allow the TTR registers to determine which channels
containing all 0s are to be Bit 7 stuffed
1 = force Bit 7 stuffing in all 0 byte channels regardless of how
the TTR registers are programmed
TLINK
TCR1.2
TLINK Select. (See note below.)
0 = source FDL or Fs bits from TFDL register
1 = source FDL or Fs bits from the TLINK pin
TBL
TCR1.1
Transmit Blue Alarm. (See note below.)
0 = transmit data normally
1 = transmit an unframed all 1s code at TPOS and TNEG
TYEL
TCR1.0
Transmit Yellow Alarm. (See note below.)
0 = do not transmit yellow alarm
1 = transmit yellow alarm
Note: For a detailed description of how the bits in TCR1 affect the transmit side formatter of the
DS2151Q, see Figure 14-9.
相关PDF资料
PDF描述
DS21Q58LN+ IC TXRX E1 QUAD 3.3V 100LQFP
DS26504LN+ IC T1/E1/J1 64KCC ELEMENT 64LQFP
DS21352G IC TXRX T1 1-CHIP 3.3V 100-BGA
DS2174QN+T&R IC BERT ENHANCED 44-PLCC
DS2155GNC2+T&R TXRX T1/E1/J1 SGL 100CSBGA
相关代理商/技术参数
参数描述
DS2151QB/T&R 制造商:Maxim Integrated Products 功能描述:T1 SINGLE CHIP XCVR REV B T&R - Tape and Reel
DS2151QB/T&R+ 制造商:Maxim Integrated Products 功能描述:FRAMER DS1/E1/ISDN-PRI/T1 5V 44PLCC - Tape and Reel
DS2151QB/T&R 功能描述:网络控制器与处理器 IC RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS2151QB+ 功能描述:网络控制器与处理器 IC T1 Transceiver RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS2151QB+T&R 制造商:Maxim Integrated Products 功能描述:FRAMER DS1/E1/ISDN-PRI/T1 5V 44PLCC - Tape and Reel