收藏本站
参数资料
型号： DS21Q42T+
厂商： Maxim Integrated Products
文件页数： 67/116页
文件大小： 0K
描述： IC FRAMER ENHANCED T1 4X 128TQFP
标准包装： 72
控制器类型： T1 调帧器
接口： 并行/串行
电源电压： 2.97 V ~ 3.63 V
电流 - 电源： 75mA
工作温度： 0°C ~ 70°C
安装类型： 表面贴装
封装/外壳： 128-LQFP
供应商设备封装： 128-LQFP（14x20）
包装： 管件
DS21Q42
54 of 116
11.1.1 Simple Idle Code Insertion and Per-Channel Loopback
The first method involves using the Transmit Idle Registers (TIR1/2/3) to determine which of the 24 T1
channels should be overwritten with the code placed in the Transmit Idle Definition Register (TIDR).
This method allows the same 8–bit code to be placed into any of the 24 T1 channels. If this method is
used, then the CCR4.0 control bit must be set to zero.
Each of the bit position in the Transmit Idle Registers (TIR1/TIR2/TIR3) represent a DS0 channel in the
outgoing frame. When these bits are set to a one, the corresponding channel will transmit the Idle Code
contained in the Transmit Idle Definition Register (TIDR). Robbed bit signaling and Bit 7 stuffing will
occur over the programmed Idle Code unless the DS0 channel is made transparent by the Transmit
Transparency Registers.
The Transmit Idle Registers (TIRs) have an alternate function that allow them to define a Per–Channel
LoopBack (PCLB). If the TIRFS control bit (CCR4.0) is set to one, then the TIRs will determine which
channels (if any) from the backplane should be replaced with the data from the receive side or in other
words, off of the T1 line. If this mode is enabled, then transmit and receive clocks and frame syncs must
be synchronized. One method to accomplish this would be to tie RCLK to TCLK and RFSYNC to
TSYNC.
TIR1/TIR2/TIR3: TRANSMIT IDLE REGISTERS (Address=3C to 3E Hex)
[Also used for Per–Channel Loopback]
(MSB)
(LSB)
CH8
CH7
CH6
CH5
CH4
CH3
CH2
CH1
TIR1 (3C)
CH16
CH15
CH14
CH13
CH12
CH11
CH10
CH9
TIR2 (3D)
CH24
CH23
CH22
CH21
CH20
CH19
CH18
CH17
TIR3 (3E)
SYMBOLS POSITIONS NAME AND DESCRIPTION
CH1 – 24
TIR1.0 - 3.7
Transmit Idle Code Insertion Control Bits.
0 = do not insert the Idle Code in the TIDR into this channel
1 = insert the Idle Code in the TIDR into this channel
NOTE:
If CCR4.0=1, then a zero in the TIRs implies that channel data is to be sourced from TSER and a one
implies that channel data is to be sourced from the output of the receive side framer (i.e., Per–Channel
Loopback; see Figure 1–1).
TIDR: TRANSMIT IDLE DEFINITION REGISTER (Address=3F Hex)
(MSB)
(LSB)
TIDR7
TIDR6
TIDR5
TIDR4
TIDR3
TIDR2
TIDR1
TIDR0
SYMBOL
POSITION
NAME AND DESCRIPTION
TIDR7
TIDR.7
MSB of the Idle Code (this bit is transmitted first)
TIDR0
TIDR.0
LSB of the Idle Code (this bit is transmitted last)
相关PDF资料
PDF描述
DS21Q43-ATN IC FRAMER E1 QUAD 5V 128-TQFP
DS21Q44T+ IC FRAMER ENHANCED E1 4X 128TQFP
DS21Q50LN IC TRANSCEIVER E1 QD IND 100LQFP
DS21Q55 IC TXRX QUAD T1/E1/J1 SCT 256BGA
DS21Q59LN+ IC TXRX E1 QUAD 100-LQFP
相关代理商/技术参数
参数描述
DS21Q42T+ 功能描述:网络控制器与处理器 IC Enhanced Quad T1 Framer RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS21Q42TN 功能描述:网络控制器与处理器 IC Enhanced Quad T1 Framer RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS21Q43A 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:Quad E1 Framer
DS21Q43AT 功能描述:网络控制器与处理器 IC Quad E1 Framer RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS21Q43AT+ 功能描述:网络控制器与处理器 IC Quad E1 Framer RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*