- 您现在的位置：买卖IC网 > PDF目录1914 > DS21Q42T+ (Maxim Integrated Products)IC FRAMER ENHANCED T1 4X 128TQFP PDF资料下载
参数资料
| 型号： | DS21Q42T+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 71/116页 |
| 文件大小： | 0K |
| 描述： | IC FRAMER ENHANCED T1 4X 128TQFP |
| 标准包装： | 72 |
| 控制器类型： | T1 调帧器 |
| 接口： | 并行/串行 |
| 电源电压： | 2.97 V ~ 3.63 V |
| 电流 - 电源： | 75mA |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 128-LQFP |
| 供应商设备封装： | 128-LQFP（14x20） |
| 包装： | 管件 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页当前第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页第81页第82页第83页第84页第85页第86页第87页第88页第89页第90页第91页第92页第93页第94页第95页第96页第97页第98页第99页第100页第101页第102页第103页第104页第105页第106页第107页第108页第109页第110页第111页第112页第113页第114页第115页第116页
DS21Q42
58 of 116
13.
ELASTIC STORES OPERATION
Each framer in the DS21Q42 contains dual two–frame (386 bits) elastic stores, one for the receive
direction, and one for the transmit direction. These elastic stores have two main purposes. First, they can
be used to rate convert the T1 data stream to 2.048 Mbps (or a multiple of 2.048 Mbps) which is the E1
rate. Secondly, they can be used to absorb the differences in frequency and phase between the T1 data
stream and an asynchronous (i.e., not frequency locked) backplane clock (which can be 1.544 MHz or
2.048 MHz). The backplane clock can burst at rates up to 8.192 MHz. Both elastic stores contain full
controlled slip capability which is necessary for this second purpose. Both elastic stores within the
framer are fully independent and no restrictions apply to the sourcing of the various clocks that are
applied to them. The transmit side elastic store can be enabled whether the receive elastic store is enabled
or disabled and vice versa. Also, each elastic store can interface to either a 1.544 MHz or 2.048 MHz
backplane without regard to the backplane rate the other elastic store is interfacing.
Two mechanisms are available to the user for resetting the elastic stores. The Elastic Store Reset (TX -
CCR7.4 & RX - CCR7.5) function forces the elastic stores to a depth of one frame unconditionally. Data
is lost during the reset. The second method, the Elastic Store Align (TX - CCR6.5 & RX - CCR6.6)
forces the elastic store depth to a minimum depth of half a frame only if the current pointer separation is
already less then half a frame. If a realignment occurs data is lost. In both mechanisms, independent
resets are provided for both the receive and transmit elastic stores.
13.1 Receive Side
If the receive side elastic store is enabled (CCR1.2=1), then the user must provide either a 1.544 MHz
(CCR1.3=0) or 2.048 MHz (CCR1.3=1) clock at the RSYSCLK pin. The user has the option of either
providing a frame/multiframe sync at the RSYNC pin (RCR2.3=1) or having the RSYNC pin provide a
pulse on frame boundaries (RCR2.3=0). If the user wishes to obtain pulses at the frame boundary, then
RCR2.4 must be set to zero and if the user wishes to have pulses occur at the multiframe boundary, then
RCR2.4 must be set to one. The framer will always indicate frame boundaries via the RFSYNC output
whether the elastic store is enabled or not. If the elastic store is enabled, then multiframe boundaries will
be indicated via the RMSYNC output. If the user selects to apply a 2.048 MHz clock to the RSYSCLK
pin, then the data output at RSER will be forced to all ones every fourth channel. Hence channels 1
(except for the MSB), 5, 9, 13, 17, 21, 25, and 29 (timeslots 0, 4, 8, 12, 16, 20, 24, and 28) will be forced
to a one. The F–bit will be passed in the MSB of channel 1. Also, in 2.048 MHz applications, the
RCHBLK output will be forced high during the same channels as the RSER pin. See Section 19 for more
details. This is useful in T1 to CEPT (E1) conversion applications. If the 386–bit elastic buffer either
fills or empties, a controlled slip will occur. If the buffer empties, then a full frame of data (193 bits) will
be repeated at RSER and the SR1.4 and RIR1.3 bits will be set to a one. If the buffer fills, then a full
frame of data will be deleted and the SR1.4 and RIR1.4 bits will be set to a one.
13.2 Transmit Side
The operation of the transmit elastic store is very similar to the receive side. The transmit side elastic
store is enabled via CCR1.7. A 1.544 MHz (CCR1.4=0) or 2.048 MHz (CCR1.4=1) clock can be applied
to the TSYSCLK input. If the user selects to apply a 2.048 MHz clock to the TSYSCLK pin, then the
data input at TSER will be ignored every fourth channel. Hence channels 1 (except for the MSB), 5, 9,
13, 17, 21, 25, and 29 (timeslots 0, 4, 8, 12, 16, 20, 24, and 28) will be ignored. A special case exists for
the MSB of channel 1. Via TCR1.6 the MSB of channel 1 can be sampled as the F-bit. The user must
supply a 8 kHz frame sync pulse to the TSSYNC input. Also, in 2.048 MHz applications, the TCHBLK
output will be forced high during the channels ignored by the framer. See Section 19 for more details.
Controlled slips in the transmit elastic store are reported in the RIR2.3 bit and the direction of the slip is
reported in the RIR2.5 and RIR2.4 bits.
相关PDF资料 |
PDF描述 |
|---|---|
| DS21Q43-ATN | IC FRAMER E1 QUAD 5V 128-TQFP |
| DS21Q44T+ | IC FRAMER ENHANCED E1 4X 128TQFP |
| DS21Q50LN | IC TRANSCEIVER E1 QD IND 100LQFP |
| DS21Q55 | IC TXRX QUAD T1/E1/J1 SCT 256BGA |
| DS21Q59LN+ | IC TXRX E1 QUAD 100-LQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS21Q42T+ | 功能描述:网络控制器与处理器 IC Enhanced Quad T1 Framer RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray |
| DS21Q42TN | 功能描述:网络控制器与处理器 IC Enhanced Quad T1 Framer RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray |
| DS21Q43A | 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:Quad E1 Framer |
| DS21Q43AT | 功能描述:网络控制器与处理器 IC Quad E1 Framer RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray |
| DS21Q43AT+ | 功能描述:网络控制器与处理器 IC Quad E1 Framer RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray |
发布紧急采购，3分钟左右您将得到回复。