参数资料
型号: DS26303LN-75+
厂商: Maxim Integrated Products
文件页数: 71/101页
文件大小: 0K
描述: IC LIU E1/T1/J1 3.3V 144-ELQFP
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 13
类型: 线路接口装置(LIU)
驱动器/接收器数: 8/8
规程: T1/E1/J1
电源电压: 3.135 V ~ 3.465 V
安装类型: 表面贴装
封装/外壳: 144-LQFP 裸露焊盘
供应商设备封装: 144-LQFP 裸露焊盘
包装: 托盘
DS26303: 3.3V, T1/E1/J1, Short-Haul, Octal Line Interface Unit
71 of 101
Figure 6-13. Repetitive Pattern Synchronization State Diagram
Sync
Match
Verify
1 bit error
Pattern Matches
32
bi
ts
w
it
ho
ut
er
ro
rs
6
of
64
bi
ts
w
ith
er
ro
rs
6.9.3.3
Receive Pattern Monitoring
Receive pattern monitoring monitors the incoming data stream for both an OOS condition and bit errors and counts
the incoming bits. An out-of-synchronization (OOS) condition is declared when the synchronization state machine
is not in the sync state. An OOS condition is terminated when the synchronization state machine is in the sync
state.
Bit errors are determined by comparing the incoming data stream bit to the receive pattern generator output. If they
do not match, a bit error is declared, and the bit error and bit counts are incremented. If they match, only the bit
count is incremented. The bit count and bit-error count are not incremented when an OOS condition exists.
6.9.4
Transmit Pattern Generation
Pattern generation generates the outgoing test pattern and passes it onto error insertion. The transmit pattern
generator is a 32-bit shift register that shifts data from the least significant bit (LSB) or bit 1 to the most significant
bit (MSB) or bit 32. The input to bit 1 is the feedback. For a PRBS pattern (generating polynomial x
n + xy + 1), the
feedback is an XOR of bit n and bit y. For a repetitive pattern (length n), the feedback is bit n. The values for n and
y are individually programmable (1 to 32). The output of the receive pattern generator is the feedback. If QRSS is
enabled, the feedback is an XOR of bits 17 and 20, and the output will be forced to one if the next 14 bits are all 0s.
QRSS is programmable (on or off). For PRBS and QRSS patterns, the feedback will be forced to 1 if bits 1 to 31
are all 0s. When a new pattern is loaded, the pattern generator is loaded with a seed/pattern value before pattern
generation starts. The seed/pattern value is programmable (0 – 2
n – 1).
6.9.4.1
Transmit Error Insertion
Error insertion inserts errors into the outgoing pattern data stream. Errors are inserted one at a time or at a rate of
one out of every 10
n bits. The value of n is programmable (1 to 7 or off). Single bit-error insertion can be initiated
from the microprocessor interface, or by the manual error-insertion input (TMEI). The method of single error
insertion is programmable (register or input). If pattern inversion is enabled, the data stream is inverted before the
overhead/stuff bits are inserted. Pattern inversion is programmable (on or off).
相关PDF资料
PDF描述
DS3151+ IC LIU DS3/E3/STS-1 SGL 144CSBGA
VE-26X-IU-F2 CONVERTER MOD DC/DC 5.2V 200W
MC100EP17DTR2G IC RCVR/DRV ECL QUAD DFF 20TSSOP
DS2181AQ+T&R IC TXRX CEPT PRIMARY RATE 44PLCC
MS27468T11B98PB CONN RCPT 6POS JAM NUT W/PINS
相关代理商/技术参数
参数描述
DS26303LN-75+ 功能描述:电信线路管理 IC 3.3V E1/T1/J1 Short Haul Octal LIU RoHS:否 制造商:STMicroelectronics 产品:PHY 接口类型:UART 电源电压-最大:18 V 电源电压-最小:8 V 电源电流:30 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:VFQFPN-48 封装:Tray
DS26303LN-75+A3 功能描述:电信线路管理 IC 3.3V E1/T1/J1 Short Haul Octal LIU RoHS:否 制造商:STMicroelectronics 产品:PHY 接口类型:UART 电源电压-最大:18 V 电源电压-最小:8 V 电源电流:30 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:VFQFPN-48 封装:Tray
DS26303LN-75A3 功能描述:电信线路管理 IC 3.3V E1/T1/J1 Short Haul Octal LIU RoHS:否 制造商:STMicroelectronics 产品:PHY 接口类型:UART 电源电压-最大:18 V 电源电压-最小:8 V 电源电流:30 mA 最大工作温度:+ 85 C 最小工作温度:- 40 C 安装风格:SMD/SMT 封装 / 箱体:VFQFPN-48 封装:Tray
DS26303LN-XXX 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:3.3V, E1/T1/J1, Short-Haul, Octal Line Interface Unit
DS26303LN-XXX+ 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:3.3V, E1/T1/J1, Short-Haul, Octal Line Interface Unit