- 您现在的位置：买卖IC网 > PDF目录97909 > EM6617SO24A 30V N-Channel PowerTrench MOSFET PDF资料下载
参数资料
| 型号： | EM6617SO24A |
| 元件分类： | MOSFETs |
| 英文描述： | 30V N-Channel PowerTrench MOSFET |
| 中文描述： | 30V的N沟道的PowerTrench MOSFET的 |
| 文件页数： | 28/67页 |
| 文件大小： | 824K |
| 代理商： | EM6617SO24A |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页当前第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页
EM6617
03/02 REV. C/442
Copyright
2002, EM Microelectronic-Marin SA
34
www.emmicroelectronic.com
The ADC is of bipolar type : Positive or negative input signal referred to the virtual ground point Vgnd are
converted. The virtual ground point Vgnd is ideally on (VSS + VBAT)/2 voltage level and must be supplied from
external circuitry.
The positive reference voltage VREF referred to the virtual ground point Vgnd defines the input voltage range
without overflow (full scale conversion : +/- Vref referred to Vgnd)
Data format is the following : MSB ADCData[7] is a sign bit indicating if input signal Vin is higher than virtual
ground (ADCData[7] = “1“) or lower (ADCData[7] = “0“).
For negative input signal the LSB’s are coded in 1’ complement.
For instance :
Vin = +VREF
->
ADCData[7:0] = “1 1111111“
+127
Vin = +VREF/ 2
->
ADCData[7:0] = “1 0111111“
+63
Vin = Vgnd
->
ADCData[7:0] = “1 0000000“
+0
Vin = -VREF/ 2
->
ADCData[7:0] = “0 1000000“
-63
Vin = -VREF
->
ADCData[7:0] = “0 0000000“
-127
The input channel to be converted is selected by ChannelSelA and ChannelSelB bits in RegADCCntl register.
The default channel selection is Vref as ADC input.
Setting to “1“ the Vref1/2Sel bit in RegSysCntl 3 selects the internal VDD (Vref2 input) as the reference voltage.
By default, VREF is defined by the external Vref pad (Vref1 input).
The ADC has two working modes (continuous or single mode) selected by the Single bit (Single = “0“ -->
continuous mode ; Single = “1“ --> single mode).
10.1 Continuous mode
The conversion process is activated by setting to “1“ the StartConvert bit. The selected channel is cyclically
(3.2kHz) converted and the result is stored in RegADCDataL and RegADCDataH registers. When
the
StartConvert
bit is set to “0“, the process runs until completion of the current 10 clock cycles and then stops.
After each completion, an interrupt request IRQADC is generated. This interrupt request can be masked
(default) (MaskIRQADC bit). See also the interrupt handling section 13 for further information. One always
10.2 Single mode
Setting to “1“ the StartConvert bit activates 1 conversion of the selected channel. At the end of the conversion,
the StartConvert bit is automatically cleared and IRQADC is generated. Data are available in RegADCDataL
and RegADCDataH registers. One always needs to read RegADCDataH first , this read updates the
RegADCDataL
value (shadow register).
相关PDF资料 |
PDF描述 |
|---|---|
| EM6617SO24B | 30V N-Channel PowerTrench MOSFET |
| EM6617SO28A | Advanced Synchronous Rectified Buck MOSFET Drivers with Pre-POR OVP; Temperature Range: 0°C to 70°C; Package: 8-EPSOIC T&R |
| EM6617SO28B | Advanced Synchronous Rectified Buck MOSFET Drivers with Pre-POR OVP; Temperature Range: -40°C to 85°C; Package: 8-EPSOIC T&R |
| EM6617TP28A | Advanced Synchronous Rectified Buck MOSFET Drivers with Pre-POR OVP; Temperature Range: 0°C to 70°C; Package: 8-EPSOIC T&R |
| EM6617TP28B | Advanced Synchronous Rectified Buck MOSFET Drivers with Pre-POR OVP; Temperature Range: -40°C to 85°C; Package: 8-EPSOIC T&R |
相关代理商/技术参数 |
参数描述 |
|---|---|
| EM6617SO24B | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Microcontroller |
| EM6617SO28A | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Microcontroller |
| EM6617SO28B | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Microcontroller |
| EM6617TP28A | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Microcontroller |
| EM6617TP28B | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Microcontroller |
发布紧急采购，3分钟左右您将得到回复。