- 您现在的位置：买卖IC网 > PDF目录67681 > IBM25403GCX-3JC76C2 RISC PROCESSOR, PQFP16 PDF资料下载
参数资料
| 型号： | IBM25403GCX-3JC76C2 |
| 元件分类： | 微控制器/微处理器 |
| 英文描述： | RISC PROCESSOR, PQFP16 |
| 封装： | PLASTIC, QFP-160 |
| 文件页数： | 51/54页 |
| 文件大小： | 541K |
| 代理商： | IBM25403GCX-3JC76C2 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页当前第51页第52页第53页第54页
IBM PowerPC 403GCX
6
The programmable interval timer is a 32-bit regis-
ter that is decremented at the same rate as the
time base is incremented. The user preloads the
PIT register with a value to create the desired
delay. When the register is decremented to zeros,
the timer stops decrementing, a bit is set in the
timer status register (TSR), and a PIT interrupt is
generated. Optionally, the PIT can be pro-
grammed to reload automatically the last value
written to the PIT register, after which the PIT
begins decrementing again.The timer control
register (TCR) contains the interrupt enable for
the PIT interrupt.
The xed interval timer generates periodic inter-
rupts based on selected bits in the time base.
Users may select one of four intervals for the
timer period by setting the correct bits in the
TCR. When the selected bit in the time base
changes from 0 to 1, a bit is set in the TSR and a
FIT interrupt is generated. The FIT interrupt
enable is contained in the TCR.
The watchdog timer generates a periodic inter-
rupt based on selected bits in the time base.
Users may select one of four time periods for the
interval and the type of reset generated if the
watchdog timer expires twice without an interven-
ing clear from software. If enabled, the watchdog
timer generates a system reset unless an excep-
tion handler updates the watchdog timer status
bit before the timer has completed two of the
selected timer intervals.
Serial Port
The 403GCX serial port is capable of supporting
RS232 standard serial communication, as well as
high-speed execution (bit speed at a maximum of
one-sixteenth of the SysClk processor clock
rate). The serial clock which drives the serial port
can come from the internal SysClk or an external
clock source at the external serial clock pin (max-
imum of one-half the SysClk rate).
The 403GCX serial port contains many features
found only on advanced communications control-
lers, including the capability of being a peripheral
for DMA transfers. An internal loopback mode
supports diagnostic testing without requiring
external hardware. An auto echo mode is
included to retransmit received bits to the exter-
nal device. Auto-resynchronization after a line
break and false start bit detection are also pro-
vided, as well as operating modes that allow the
serial port to react to handshaking line inputs or
control handshaking line outputs without soft-
ware interaction. Program generation mode
allows the serial port transmitter to be used for
pulse width modulation with duty cycle variation
controlled by frame size, baud rate, and data pat-
tern.
JTAG Port
The JTAG port has been enhanced to allow it to
be used as a debug port. Through the JTAG test
access port, debug software on a workstation or
PC can single-step the processor and interrogate
internal processor state to facilitate software
debugging. The standard JTAG boundary-scan
register allows testing of circuitry external to the
chip, primarily the board interconnect. Alterna-
tively, the JTAG bypass register can be selected
when no other test data register needs to be
accessed during a board-level test operation.
Real-Time Debug Port
The real-time debug port supports tracing the
instruction stream being executed out of the
instruction cache in real time. The trace status
signals provide trace information while in real-
time trace debug mode. This mode does not alter
the performance of the processor.
P/N Code
Note: The characters following the dash indicate reli-
ability grade (3), package type (J), revision level (C),
maximum internal CPU core clock rate (76), commer-
cial version (C), and the ratio of internal CPU core clock
rate to external bus speed (2 times the maximum exter-
nal bus clock rate).
Table 3. PPC403GCX Part Number
MHz
Part Number
Package
76
403GCX-3JC76C2
PQFP
相关PDF资料 |
PDF描述 |
|---|---|
| IBM25405GP-3BA200C2 | RISC PROCESSOR, PBGA456 |
| IBM25EMPPC603EFG-100 | 32-BIT, 100 MHz, RISC PROCESSOR, PQFP240 |
| IBM25EMPPC603EBG-100 | 32-BIT, 100 MHz, RISC PROCESSOR, CBGA255 |
| IBM25EMPPC740LDBC4000 | 32-BIT, 400 MHz, RISC PROCESSOR, CBGA255 |
| IBM25EMPPC750LCBF3330 | 32-BIT, 333 MHz, RISC PROCESSOR, CBGA360 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| IBM25403GCX-JA50C2 | 制造商:IBM 功能描述:403GCX-JA50C |
| IBM25403GCX-JA60C2 | 制造商:IBM 功能描述:403GCX-JA60C2 |
| IBM25C710AB3A100 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Controller Miscellaneous - Datasheet Reference |
| IBM25CPC700BB3B66 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Peripheral (Multifunction) Controller |
| IBM25CPC700BB3B83 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Peripheral (Multifunction) Controller |
发布紧急采购，3分钟左右您将得到回复。