- 您现在的位置：买卖IC网 > Datasheet目录329 > IDT70V07L35G (IDT, Integrated Device Technology Inc)IC SRAM 256KBIT 35NS 68PGA Datasheet资料下载
参数资料
| 型号： | IDT70V07L35G |
| 厂商： | IDT, Integrated Device Technology Inc |
| 文件页数： | 17/19页 |
| 文件大小： | 0K |
| 描述： | IC SRAM 256KBIT 35NS 68PGA |
| 标准包装： | 3 |
| 格式 - 存储器： | RAM |
| 存储器类型： | SRAM - 双端口，异步 |
| 存储容量： | 256K (32K x 8) |
| 速度： | 35ns |
| 接口： | 并联 |
| 电源电压： | 3 V ~ 3.6 V |
| 工作温度： | 0°C ~ 70°C |
| 封装/外壳： | 68-BPGA |
| 供应商设备封装： | 68-PGA（29.46x29.46） |
| 包装： | 托盘 |
| 其它名称： | 70V07L35G |
IDT70V07S/L
High-Speed 32K x 8 Dual-Port Static RAM
is requested and the processor which requested it no longer needs the
resource, the entire system can hang up until a one is written into that
semaphore request latch.
The critical case of semaphore timing is when both sides request
a single token by attempting to write a zero into it at the same time. The
semaphore logic is specially designed to resolve this problem. If
simultaneous requests are made, the logic guarantees that only one
side receives the token. If one side is earlier than the other in making
the request, the first side to make the request will receive the token. If
both requests arrive at the same time, the assignment will be arbitrarily
made to one port or the other.
One caution that should be noted when using semaphores is that
semaphores alone do not guarantee that access to a resource is
secure. As with any powerful programming technique, if semaphores
are misused or misinterpreted, a software error can easily happen.
Initialization of the semaphores is not automatic and must be
handled via the initialization program at power-up. Since any sema-
phore request flag which contains a zero must be reset to a one, all
semaphores on both sides should have a one written into them at
initialization from both sides to assure that they will be free when
needed.
Using Semaphores—Some Examples
Perhaps the simplest application of semaphores is their applica-
tion as resource markers for the IDT70V07’s Dual-Port SRAM. Say the
32K x 8 SRAM was to be divided into two 16K x 8 blocks which were
to be dedicated at any one time to servicing either the left or right port.
Semaphore 0 could be used to indicate the side which would control
the lower section of memory, and Semaphore 1 could be defined as the
indicator for the upper section of memory.
To take a resource, in this example the lower 16K of Dual-Port
SRAM, the processor on the left port could write and then read a zero
in to Semaphore 0. If this task were successfully completed (a zero
was read back rather than a one), the left processor would assume
control of the lower 16K. Meanwhile the right processor was attempting
to gain control of the resource after the left processor, it would read
back a one in response to the zero it had attempted to write into
Semaphore 0. At this point, the software could choose to try and gain
control of the second 16K section by writing, then reading a zero into
Semaphore 1. If it succeeded in gaining control, it would lock out the left
17
Industrial and Commercial Temperature Ranges
side.
Once the left side was finished with its task, it would write a one to
Semaphore 0 and may then try to gain access to Semaphore 1. If
Semaphore 1 was still occupied by the right side, the left side could
undo its semaphore request and perform other tasks until it was able
to write, then read a zero into Semaphore 1. If the right processor
performs a similar task with Semaphore 0, this protocol would allow the
two processors to swap 16K blocks of Dual-Port SRAM with each
other.
The blocks do not have to be any particular size and can even be
variable, depending upon the complexity of the software using the
semaphore flags. All eight semaphores could be used to divide the
Dual-Port SRAM or other shared resources into eight parts. Sema-
phores can even be assigned different meanings on different sides
rather than being given a common meaning as was shown in the
example above.
Semaphores are a useful form of arbitration in systems like disk
interfaces where the CPU must be locked out of a section of memory
during a transfer and the I/O device cannot tolerate any wait states.
With the use of semaphores, once the two devices has determined
which memory area was “off-limits” to the CPU, both the CPU and the
I/O devices could access their assigned portions of memory continu-
ously without any wait states.
Semaphores are also useful in applications where no memory
“WAIT” state is available on one or both sides. Once a semaphore
handshake has been performed, both processors can access their
assigned SRAM segments at full speed.
Another application is in the area of complex data structures. In this
case, block arbitration is very important. For this application one
processor may be responsible for building and updating a data
structure. The other processor then reads and interprets that data
structure. If the interpreting processor reads an incomplete data
structure, a major error condition may exist. Therefore, some sort of
arbitration must be used between the two different processors. The
building processor arbitrates for the block, locks it and then is able to
go in and update the data structure. When the update is completed, the
data structure block is released. This allows the interpreting processor
to come back and read the complete data structure, thereby guaran-
teeing a consistent data structure.
相关PDF资料 |
PDF描述 |
|---|---|
| IDT70V08S15PF | IC SRAM 512KBIT 15NS 100TQFP |
| IDT70V09L20PFI | IC SRAM 1MBIT 20NS 100TQFP |
| IDT70V18L20PFI | IC SRAM 576KBIT 20NS 100TQFP |
| IDT70V25L55G | IC SRAM 128KBIT 55NS 84PGA |
| IDT70V261L25PFGI | IC SRAM 256KBIT 25NS 100TQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| IDT70V07L35J | 功能描述:IC SRAM 256KBIT 35NS 68PLCC RoHS:否 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:1,000 系列:- 格式 - 存储器:RAM 存储器类型:SRAM - 双端口，同步 存储容量:1.125M（32K x 36） 速度:5ns 接口:并联 电源电压:3.15 V ~ 3.45 V 工作温度:-40°C ~ 85°C 封装/外壳:256-LBGA 供应商设备封装:256-CABGA（17x17） 包装:带卷 (TR) 其它名称:70V3579S5BCI8 |
| IDT70V07L35J8 | 功能描述:IC SRAM 256KBIT 35NS 68PLCC RoHS:否 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:1,000 系列:- 格式 - 存储器:RAM 存储器类型:SRAM - 双端口，同步 存储容量:1.125M（32K x 36） 速度:5ns 接口:并联 电源电压:3.15 V ~ 3.45 V 工作温度:-40°C ~ 85°C 封装/外壳:256-LBGA 供应商设备封装:256-CABGA（17x17） 包装:带卷 (TR) 其它名称:70V3579S5BCI8 |
| IDT70V07L35PF | 功能描述:IC SRAM 256KBIT 35NS 80TQFP RoHS:否 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:1,000 系列:- 格式 - 存储器:RAM 存储器类型:SRAM - 双端口，同步 存储容量:1.125M（32K x 36） 速度:5ns 接口:并联 电源电压:3.15 V ~ 3.45 V 工作温度:-40°C ~ 85°C 封装/外壳:256-LBGA 供应商设备封装:256-CABGA（17x17） 包装:带卷 (TR) 其它名称:70V3579S5BCI8 |
| IDT70V07L35PF8 | 功能描述:IC SRAM 256KBIT 35NS 80TQFP RoHS:否 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:45 系列:- 格式 - 存储器:RAM 存储器类型:SRAM - 双端口，异步 存储容量:128K（8K x 16） 速度:15ns 接口:并联 电源电压:3 V ~ 3.6 V 工作温度:0°C ~ 70°C 封装/外壳:100-LQFP 供应商设备封装:100-TQFP（14x14） 包装:托盘 其它名称:70V25S15PF |
| IDT70V07L35PFGI | 制造商:Integrated Device Technology Inc 功能描述:IC SRAM 256KBIT 35NS 80TQFP |
发布紧急采购，3分钟左右您将得到回复。