参数资料
型号: IDT82V2608BB
厂商: INTEGRATED DEVICE TECHNOLOGY INC
元件分类: 数字传输电路
英文描述: INVERSE MULTIPLEXING FOR ATM
中文描述: ATM/SONET/SDH SUPPORT CIRCUIT, PBGA208
封装: PLASTIC, BGA-208
文件页数: 18/98页
文件大小: 398K
代理商: IDT82V2608BB
INTERFACE
18
December 4, 2006
IDT82V2608
Inverse Multiplexing for ATM
3
INT ERFACE
3.1
UTOPIA INTERFACE
The Utopia interface operates in Level 2 mode. The IDT82V2608
supports up to 8 Utopia Level 2 ports. Each port is assigned an address
ranging from0 to 30. The address value of 31 is reserved and should
not be used. All the 31 ports can be individually enabled or disabled by
ConfigUtopiaIF
command.
Each IMA group or UNI link corresponds to a port. For each IMA
group, the port address can be assigned by
ConfigGroupInterface
command. For each UNI link, the port address can be assigned by
ConfigUNILink
command. Inside the device, each port corresponds to
a GCF (Group Cell FIFO) which is 2 cells deep.
The IDT82V2608 uses cell level handshake for cell transfer. One
entire cell is transferred before another port can be selected. The start of
a cell is marked by TxSOC and RxSOC signals in the transmt and the
receive directions respectively. These two signals are active during the
first byte of a cell.
3.1.1
UTOPIA LOOPBACK FUNCTION
For diagnostic purpose, the capability to loop back all Utopia traffic to
Utopia bus is provided. This loopback is called Utopia loopback and can
be enabled by
ConfigLoopMode
command. In this mode, cells are
taken fromTGCFs (Transmt Group Cell FIFO) and sent to the respec-
tive RGCFs (Receive Group Cell FIFO). When in Utopia loopback mode,
cells will not be transmtted to the line interface. Refer to
Figure-3
.
Figure-3 Utopia Loopback
UTOPIA Interface
Tx
Group
Cell
FIFO 1
Rx
Group
Cell
FIFO 1
Tx
Group
Cell
FIFO 0
Rx
Group
Cell
FIFO 0
……
相关PDF资料
PDF描述
IDT82V2608 INVERSE MULTIPLEXING FOR ATM
IDT82V3001A WAN PLL WITH SINGLE REFERENCE INPUT
IDT82V3001APV WAN PLL WITH SINGLE REFERENCE INPUT
IDT82V3002A WAN PLL WITH DUAL REFERENCE INPUTS
IDT82V3002APV WAN PLL WITH DUAL REFERENCE INPUTS
相关代理商/技术参数
参数描述
IDT82V2608BBG 功能描述:IC INVERSE MUX 8CH ATM 208-BGA RoHS:是 类别:集成电路 (IC) >> 接口 - 专用 系列:- 标准包装:3,000 系列:- 应用:PDA,便携式音频/视频,智能电话 接口:I²C,2 线串口 电源电压:1.65 V ~ 3.6 V 封装/外壳:24-WQFN 裸露焊盘 供应商设备封装:24-QFN 裸露焊盘(4x4) 包装:带卷 (TR) 安装类型:表面贴装 产品目录页面:1015 (CN2011-ZH PDF) 其它名称:296-25223-2
IDT82V2616 制造商:IDT 制造商全称:Integrated Device Technology 功能描述:INVERSE MULTIPLEXING FOR ATM
IDT82V2616BB 功能描述:IC INVERSE MUX 16CH ATM 272-PBGA RoHS:否 类别:集成电路 (IC) >> 接口 - 专用 系列:- 标准包装:3,000 系列:- 应用:PDA,便携式音频/视频,智能电话 接口:I²C,2 线串口 电源电压:1.65 V ~ 3.6 V 封装/外壳:24-WQFN 裸露焊盘 供应商设备封装:24-QFN 裸露焊盘(4x4) 包装:带卷 (TR) 安装类型:表面贴装 产品目录页面:1015 (CN2011-ZH PDF) 其它名称:296-25223-2
IDT82V2616BBG 功能描述:IC INVERSE MUX 16CH ATM 272-PBGA RoHS:是 类别:集成电路 (IC) >> 接口 - 专用 系列:- 标准包装:3,000 系列:- 应用:PDA,便携式音频/视频,智能电话 接口:I²C,2 线串口 电源电压:1.65 V ~ 3.6 V 封装/外壳:24-WQFN 裸露焊盘 供应商设备封装:24-QFN 裸露焊盘(4x4) 包装:带卷 (TR) 安装类型:表面贴装 产品目录页面:1015 (CN2011-ZH PDF) 其它名称:296-25223-2
IDT82V3001A 制造商:IDT 制造商全称:Integrated Device Technology 功能描述:WAN PLL WITH SINGLE REFERENCE INPUT