参数资料
型号: ISD4003-08MSI
厂商: WINBOND ELECTRONICS CORP
元件分类: 音频合成
英文描述: 480 SEC, SPEECH SYNTHESIZER WITH RCDG, PDSO28
封装: 0.1200 INCH, PLASTIC, SOIC-28
文件页数: 22/37页
文件大小: 392K
代理商: ISD4003-08MSI
29
ATmega165A/PA/325A/PA/3250A/PA/645A/P/6450A/P [DATASHEET]
8285E–AVR–02/2013
9.3
Default clock source
The device is shipped with CKSEL = “0010”, SUT = “10”, and CKDIV8 programmed. The default clock source set-
ting is the Internal RC Oscillator with longest start-up time and an initial system clock prescaling of 8. This default
setting ensures that all users can make their desired clock source setting using an In-System or Parallel
programmer.
9.4
Calibrated internal RC oscillator
By default, the Internal RC Oscillator provides an approximate 8MHz clock. Though voltage and temperature
dependent, this clock can be very accurately calibrated by the user. See Table 28-11 on page 296 and ”Internal
oscillator speed” on page 331 for more details. The device is shipped with the CKDIV8 Fuse programmed. See
This clock may be selected as the system clock by programming the CKSEL Fuses as shown in Table 9-3. If
selected, it will operate with no external components. During reset, hardware loads the pre-programmed calibration
value into the OSCCAL Register and thereby automatically calibrates the RC Oscillator. The accuracy of this cali-
bration is shown as Factory calibration in Table 28-11 on page 296.
By changing the OSCCAL register from SW, see ”OSCCAL – Oscillator Calibration Register” on page 35, it is pos-
sible to get a higher calibration accuracy than by using the factory calibration. The accuracy of this calibration is
shown as User calibration in Table 28-11 on page 296.
When this Oscillator is used as the chip clock, the Watchdog Oscillator will still be used for the Watchdog Timer
and for the Reset Time-out. For more information on the pre-programmed calibration value, see the section ”Cali-
Notes:
1. The device is shipped with this option selected.
2. The frequency ranges are preliminary values.
3. If 8MHz frequency exceeds the specification of the device (depends on V
CC), the CKDIV8 Fuse can be pro-
grammed in order to divide the internal frequency by 8.
When this Oscillator is selected, start-up times are determined by the SUT Fuses as shown in Table 9-4.
Note:
1. The device is shipped with this option selected
.
Table 9-3.
Internal calibrated RC oscillator operating modes
Frequency Range(2) (MHz)
CKSEL3:0
7.3 - 8.1
0010
Table 9-4.
Start-up times for the internal calibrated RC oscillator clock selection.
Power conditions
Start-up time from power-
down and power-save
Additional delay from
reset (V
CC = 5.0V)
SUT1:0
BOD enabled
6CK
14CK
00
Fast rising power
6CK
14CK + 4.1ms
01
Slowly rising power
6CK
14CK + 65ms(1)
10
Reserved
11
相关PDF资料
PDF描述
ISD4003-04MZD 240 SEC, SPEECH SYNTHESIZER WITH RCDG, PBGA19
ISD4003-04MZI 240 SEC, SPEECH SYNTHESIZER WITH RCDG, PBGA19
ISD4003-05MZD 300 SEC, SPEECH SYNTHESIZER WITH RCDG, PBGA19
ISD4003-05MZI 300 SEC, SPEECH SYNTHESIZER WITH RCDG, PBGA19
ISD4003-06MZD 360 SEC, SPEECH SYNTHESIZER WITH RCDG, PBGA19
相关代理商/技术参数
参数描述
ISD4003-08MSIR 功能描述:IC VOICE REC/PLAY 8MIN IN 28SOIC RoHS:否 类别:集成电路 (IC) >> 接口 - 语音录制和重放 系列:ISD4003 标准包装:14 系列:- 接口:串行 滤波器通频带:1.7kHz 持续时间:8 ~ 32 秒 安装类型:通孔 封装/外壳:28-DIP(0.300",7.62mm) 供应商设备封装:28-PDIP 其它名称:90-21300+000
ISD4003-08MSY 功能描述:IC VOICE REC/PLAY 8MIN 28-SOIC RoHS:是 类别:集成电路 (IC) >> 接口 - 语音录制和重放 系列:ISD4003 标准包装:14 系列:- 接口:串行 滤波器通频带:1.7kHz 持续时间:8 ~ 32 秒 安装类型:通孔 封装/外壳:28-DIP(0.300",7.62mm) 供应商设备封装:28-PDIP 其它名称:90-21300+000
ISD4003-08MSYI 功能描述:IC VOICE REC/PLAY 8MIN 28-SOIC RoHS:是 类别:集成电路 (IC) >> 接口 - 语音录制和重放 系列:ISD4003 标准包装:14 系列:- 接口:串行 滤波器通频带:1.7kHz 持续时间:8 ~ 32 秒 安装类型:通孔 封装/外壳:28-DIP(0.300",7.62mm) 供应商设备封装:28-PDIP 其它名称:90-21300+000
ISD4003-08MX 制造商:未知厂家 制造商全称:未知厂家 功能描述:Single-Chip Voice Record/Playback Devices 4-, 5-, 6-, and 8-Minute Durations
ISD400308MXD 制造商:未知厂家 制造商全称:未知厂家 功能描述:Single-Chip Voice Record/Playback Devices 2- to 16-Minute Durations