参数资料
| 型号： | ISLA224S20IR1Z |
| 厂商： | Intersil |
| 文件页数： | 7/38页 |
| 文件大小： | 0K |
| 描述： | IC ADC |
| 标准包装： | 1 |
| 系列： | * |
第1页第2页第3页第4页第5页第6页当前第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页
ISLA224S
15
FN7911.2
April 25, 2013
Theory of Operation
Functional Description
The ISLA224S is based upon a 14-bit, 250MSPS ADC converter
core that utilizes a pipelined successive approximation
architecture (see Figure 34). The input voltage is captured by a
Sample-Hold Amplifier (SHA) and converted to a unit of charge.
Proprietary charge-domain techniques are used to successively
compare the input to a series of reference charges. Decisions
made during the successive approximation operations determine
the digital code for each input value. Digital error correction is also
applied.
Power-On Calibration
The ADC core(s) perform a self-calibration at start-up. An internal
power-on-reset (POR) circuit detects the supply voltage ramps
and initiates the calibration when the analog and digital supply
voltages are above a threshold. The following conditions must be
adhered to for the power-on calibration to execute successfully:
A frequency-stable conversion clock must be applied to the
CLKP/CLKN pins
DNC pins must not be connected
SDO has an internal pull-up and should not be driven externally
RESETN is pulled low by the ADC internally during POR.
External driving of RESETN is optional.
SPI communications must not be attempted during
calibration, with the only exception of performing read
operations on the cal_done register at address 0xB6.
A user-initiated reset can subsequently be invoked in the event
that the above conditions cannot be met at power-up.
After the power supply has stabilized, the internal POR releases
RESETN and an internal pull-up pulls it high, which starts the
calibration sequence. If a subsequent user-initiated reset is
desired, the RESETN pin should be connected to an open-drain
driver with an off-state/high impedance state leakage of less
than 0.5mA to assure exit from the reset state so calibration can
start.
The calibration sequence is initiated on the rising edge of
RESETN, as shown in Figure 35. Calibration status can be
determined by reading the cal_status bit (LSB) at 0xB6. This bit is
‘0’ during calibration and goes to a logic ‘1’ when calibration is
complete. During calibration the JESD204 transmitter PLL is not
locked to the ADC sample clock, so the CML outputs will toggle at
an undetermined rate. Normal operation is resumed once
calibration is complete.
At 250MSPS the nominal calibration time is 280ms, while the
maximum calibration time is 550ms.
FIGURE 33. SERDES HISTOGRAM at 4.375Gbps
Typical Performance Curves
All Typical Performance Characteristics apply under the following conditions unless otherwise noted: AVDD = OVDD = 1.8V, TA = +25°C, AIN = -2dBFS,
fIN = 105MHz, fSAMPLE = 250MSPS. (Continued)
相关PDF资料 |
PDF描述 |
|---|---|
| VI-21L-MX-F1 | CONVERTER MOD DC/DC 28V 75W |
| HI1-674AKD-5 | IC ADC 12BIT 67KSPS 1CH 28-SBDIP |
| VE-J13-MW-B1 | CONVERTER MOD DC/DC 24V 100W |
| MS27656E11A5S | CONN RCPT 5POS WALL MNT W/SCKT |
| IDT72V3641L15PFG | IC SYNCFIFO 1024X36 15NS 120TQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| ISLA224S25 | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Dual 14-Bit, 250/200/125 MSPS JESD204B High Speed Serial Output ADC |
| ISLA224S25IR1Z | 功能描述:IC ADC RoHS:是 类别:集成电路 (IC) >> 数据采集 - 模数转换器 系列:* 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:250 系列:- 位数:12 采样率（每秒）:1.8M 数据接口:并联 转换器数目:1 功率耗散（最大）:1.82W 电压电源:模拟和数字 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:48-LQFP 供应商设备封装:48-LQFP（7x7） 包装:管件 输入数目和类型:2 个单端，单极 |
| ISLA224S25IR48EV1Z | 制造商:INTERSIL 制造商全称:Intersil Corporation 功能描述:Dual 12-Bit, 250/200/125 MSPS JESD204B High Speed Serial Output ADC |
| ISLEM-BDGSTKEV1Z | 制造商:Intersil Corporation 功能描述:DAQ ON A STICK, E-MICRO STRAIN GAUGE, EVAL BOARD 1, ROHS COM - Bulk 制造商:Intersil Corporation 功能描述:EVAL BOARD FOR STRAIN GAUGE |
| ISLI2C-KIT | 制造商:Intersil Corporation 功能描述:ISLI2C - USB INTERFACE - Bulk |
发布紧急采购，3分钟左右您将得到回复。