参数资料
型号: JANTX2N2944A
英文描述: TRANSISTOR | BJT | PNP | 10V V(BR)CEO | 100MA I(C) | TO-46
中文描述: 晶体管|晶体管|进步党| 10V的五(巴西)总裁| 100mA的一(c)|的TO - 46
文件页数: 21/21页
文件大小: 137K
代理商: JANTX2N2944A
MIL-PRF-19500/368F
9
* 4.3 Screening (JANS, JANTXV, and JANTX levels only). Screening shall be in accordance with MIL-PRF-19500
and as specified herein. The following measurements shall be made in accordance with table I herein. Devices that
exceed the limits of table I herein shall not be acceptable.
Screen
(see table IV
Measurement
of MIL-PRF-19500)
JANS level
JANTX and JANTXV levels
3c
Thermal impedance (see 4.3.3)
7
Hermetic seal (optional)
(1)
9
I
CBO1
and h
FE1
Not applicable
10
48 hours minimum
11
I
CBO1
; h
FE1
;
I
CB01 = 100 percent of initial value
or 0.5
A dc, whichever is greater;
h
FE1
=
± 15 percent of initial value.
I
CBO1
and h
FE1
12
See 4.3.2, 240 hours minimum
See 4.3.2, 80 hours minimum
13
Subgroups 2 and 3 of table I herein;
I
CB01
= 100 percent of initial value or 200 nA
dc, whichever is greater;
h
FE1
=
± 15 percent of initial value.
Subgroup 2 of table I herein;
I
CB01
= 100 percent of initial value or 200 nA dc,
whichever is greater;
h
FE1
=
± 15 percent of initial value.
14
Optional
Optional (1)
(1) Hermetic seal test shall be performed in either screen 7 or screen 14.
4.3.1 Screening (JANHC and JANKC). Screening of JANHC and JANKC die shall be in accordance with
MIL-PRF-19500. As a minimum, die shall be 100 percent probed to ensure the assembled chips will meet the
requirements of table I, group A, subgroup 2.
4.3.2 Power burn-in conditions. Power burn-in conditions are as follows: VCB = 10 - 30 V dc. Power shall be
applied to achieve TJ = +135
°C minimum using a minimum PD = 75 percent of PT maximum rated as defined in 1.3.
4.3.3 Thermal impedance (ZθJX measurements). The ZθJX measurements shall be performed in accordance with
method 3131 MIL-STD-750. Read and record data (ZθJX) shall be supplied to the qualifying activity on one lot
(random sample of 500 devices minimum) prior to shipment. The following conditions shall apply.
a. IH forward heating current ----------- 250 mA.
b. tH heating time -------------------------- 10 ms.
c. IM measurement current -------------- 10 mA.
d. tMD measurement delay time ------- 30 - 60 s.
e. VCE collector-emitter voltage ------- 10 V dc minimum.
The maximum limit for ZθJX under these test conditions are ZθJX (max) = 20 °C/W.
相关PDF资料
PDF描述
JANTX2N2945A TRANSISTOR | BJT | PNP | 20V V(BR)CEO | 100MA I(C) | TO-46
JANTX2N2946A TRANSISTOR | BJT | PNP | 35V V(BR)CEO | 100MA I(C) | TO-46
JANTX2N3250A TRANSISTOR | BJT | PNP | 60V V(BR)CEO | 200MA I(C) | TO-18
JANTX2N3251A TRANSISTOR | BJT | PNP | 60V V(BR)CEO | 200MA I(C) | TO-18
JANTX2N3418 TRANSISTOR | BJT | NPN | 60V V(BR)CEO | 3A I(C) | TO-5
相关代理商/技术参数
参数描述
JANTX2N2945 制造商: 功能描述: 制造商:Honeywell Sensing and Control 功能描述: 制造商:undefined 功能描述:
JANTX2N2945A 制造商:Microsemi Corporation 功能描述:Trans GP BJT PNP 20V 0.1A 3-Pin TO-46 制造商:Microsemi Corporation 功能描述:TRANS GP BJT PNP 20V 0.1A 3PIN TO-46 - Bulk 制造商:Microsemi Corporation 功能描述:TRANS PNP 20V 100MA 400MW TO-46 制造商:Microsemi 功能描述:Trans GP BJT PNP 20V 0.1A 3-Pin TO-46
JANTX2N2946A 制造商:Microsemi Corporation 功能描述:Trans GP BJT PNP 35V 0.1A 3-Pin TO-46 制造商:Microsemi Corporation 功能描述:PNP TRANSISTOR (PNP) - Bulk 制造商:Microsemi 功能描述:Trans GP BJT PNP 35V 0.1A 3-Pin TO-46
JANTX2N3019 功能描述:两极晶体管 - BJT JANTX2N3019 RoHS:否 制造商:ON Semiconductor 配置:Single 晶体管极性:NPN 集电极—基极电压 VCBO:140 VDC 集电极—发射极最大电压 VCEO:80 VDC 发射极 - 基极电压 VEBO:7 VDC 集电极—射极饱和电压:0.2 V 最大直流电集电极电流: 增益带宽产品fT: 直流集电极/Base Gain hfe Min:15 mA 最大工作温度:+ 200 C 安装风格:Through Hole 封装 / 箱体:TO-5
JANTX2N3019S 功能描述:两极晶体管 - BJT JANTX2N3019S RoHS:否 制造商:STMicroelectronics 配置: 晶体管极性:PNP 集电极—基极电压 VCBO: 集电极—发射极最大电压 VCEO:- 40 V 发射极 - 基极电压 VEBO:- 6 V 集电极—射极饱和电压: 最大直流电集电极电流: 增益带宽产品fT: 直流集电极/Base Gain hfe Min:100 A 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PowerFLAT 2 x 2