- 您现在的位置：买卖IC网 > PDF目录299235 > JANTX2N2944A TRANSISTOR | BJT | PNP | 10V V(BR)CEO | 100MA I(C) | TO-46 PDF资料下载
参数资料
| 型号： | JANTX2N2944A |
| 英文描述： | TRANSISTOR | BJT | PNP | 10V V(BR)CEO | 100MA I(C) | TO-46 |
| 中文描述： | 晶体管|晶体管|进步党| 10V的五（巴西）总裁| 100mA的一（c）|的TO - 46 |
| 文件页数： | 4/21页 |
| 文件大小： | 137K |
| 代理商： | JANTX2N2944A |
MIL-PRF-19500/368F
12
* 4.4.4 Group E inspection. Group E inspection shall be conducted in accordance with the conditions specified for
subgroup testing in appendix E, table IX of MIL-PRF-19500 and as specified in table III herein. Electrical
measurements (end-points) shall be in accordance with table I, group A, subgroup 2 herein. Delta measurements
shall be in accordance with the steps of 4.5.3.
4.5 Method of inspection. Methods of inspection shall be as specified in the appropriate tables and as follows.
4.5.1 Pulse measurements. Conditions for pulse measurement shall be as specified in section 4 of
MIL-STD-750.
4.5.2 Thermal resistance. Thermal resistance measurements shall be conducted in accordance with method 3131
of MIL-STD-750. The following conditions shall apply:
a.
Collector current magnitude during power application shall be 150 mA dc for RθJC.
b.
Collector emitter voltage magnitude shall be 10 V dc.
c.
Reference temperature measuring point shall be the case.
d.
Reference temperature measuring point shall be +25
°C ≤ T
R ≤ +35°C. The chosen reference
temperature shall be recorded before the test is started.
e.
Mounting arrangement shall be with heat sink to case for RθJC.
Maximum limit shall be RθJC = 35°C/W.
* 4.5.3 Delta requirements. Delta requirements shall be as specified below:
Step
Inspection
MIL-STD-750
Symbol
Unit
Method
Conditions
1
Collector-base cutoff
current
3036
Bias condition D,
VCB = 360 V dc for 2N3439, 2N3439L,
2N3439UA
VCB = 250 V dc for 2N3440, 2N3440L,
2N3440UA
ICB01
(1)
100 percent of initial
value or 200 nA dc,
whichever is greater.
2
Forward current
transfer ratio
3076
VCE = 10 V dc;
IC = 20 mA dc;
pulsed see 4.5.1
hFE1
(1)
±15 percent change
from initial reading.
(1) Devices which exceed the table I, group A limits for this test shall not be accepted.
相关PDF资料 |
PDF描述 |
|---|---|
| JANTX2N2945A | TRANSISTOR | BJT | PNP | 20V V(BR)CEO | 100MA I(C) | TO-46 |
| JANTX2N2946A | TRANSISTOR | BJT | PNP | 35V V(BR)CEO | 100MA I(C) | TO-46 |
| JANTX2N3250A | TRANSISTOR | BJT | PNP | 60V V(BR)CEO | 200MA I(C) | TO-18 |
| JANTX2N3251A | TRANSISTOR | BJT | PNP | 60V V(BR)CEO | 200MA I(C) | TO-18 |
| JANTX2N3418 | TRANSISTOR | BJT | NPN | 60V V(BR)CEO | 3A I(C) | TO-5 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| JANTX2N2945 | 制造商: 功能描述: 制造商:Honeywell Sensing and Control 功能描述: 制造商:undefined 功能描述: |
| JANTX2N2945A | 制造商:Microsemi Corporation 功能描述:Trans GP BJT PNP 20V 0.1A 3-Pin TO-46 制造商:Microsemi Corporation 功能描述:TRANS GP BJT PNP 20V 0.1A 3PIN TO-46 - Bulk 制造商:Microsemi Corporation 功能描述:TRANS PNP 20V 100MA 400MW TO-46 制造商:Microsemi 功能描述:Trans GP BJT PNP 20V 0.1A 3-Pin TO-46 |
| JANTX2N2946A | 制造商:Microsemi Corporation 功能描述:Trans GP BJT PNP 35V 0.1A 3-Pin TO-46 制造商:Microsemi Corporation 功能描述:PNP TRANSISTOR (PNP) - Bulk 制造商:Microsemi 功能描述:Trans GP BJT PNP 35V 0.1A 3-Pin TO-46 |
| JANTX2N3019 | 功能描述:两极晶体管 - BJT JANTX2N3019 RoHS:否 制造商:ON Semiconductor 配置:Single 晶体管极性:NPN 集电极—基极电压 VCBO:140 VDC 集电极—发射极最大电压 VCEO:80 VDC 发射极 - 基极电压 VEBO:7 VDC 集电极—射极饱和电压:0.2 V 最大直流电集电极电流: 增益带宽产品fT: 直流集电极/Base Gain hfe Min:15 mA 最大工作温度:+ 200 C 安装风格:Through Hole 封装 / 箱体:TO-5 |
| JANTX2N3019S | 功能描述:两极晶体管 - BJT JANTX2N3019S RoHS:否 制造商:STMicroelectronics 配置: 晶体管极性:PNP 集电极—基极电压 VCBO: 集电极—发射极最大电压 VCEO:- 40 V 发射极 - 基极电压 VEBO:- 6 V 集电极—射极饱和电压: 最大直流电集电极电流: 增益带宽产品fT: 直流集电极/Base Gain hfe Min:100 A 最大工作温度: 安装风格:SMD/SMT 封装 / 箱体:PowerFLAT 2 x 2 |
发布紧急采购，3分钟左右您将得到回复。