参数资料
型号: JANTX2N3250A
英文描述: TRANSISTOR | BJT | PNP | 60V V(BR)CEO | 200MA I(C) | TO-18
中文描述: 晶体管|晶体管|进步党| 60V的五(巴西)总裁| 200mA的一(c)|到18
文件页数: 11/21页
文件大小: 137K
代理商: JANTX2N3250A
MIL-PRF-19500/368F
19
5. PACKAGING
5.1 Packaging. For acquisition purposes, the packaging requirements shall be as specified in the contract or
order (see 6.2). When actual packaging of materiel is to be performed by DoD personnel, these personnel need to
contact the responsible packaging activity to ascertain requisite packaging requirements. Packaging requirements
are maintained by the Inventory Control Point's packaging activity within the Military Department or Defense Agency,
or within the Military Department's System Command. Packaging data retrieval is available from the managing
Military Department's or Defense Agency's automated packaging files, CD-ROM products, or by contacting the
responsible packaging activity.
6. NOTES
(This section contains information of a general or explanatory nature that may be helpful, but is not mandatory.)
6.1 Intended use. The notes specified in MIL-PRF-19500 are applicable to this specification.
6.2 Acquisition requirements. Acquisition documents must specify the following:
a.
Title, number, and date of this specification.
b.
Issue of DoDISS to be cited in the solicitation, and if required, the specific issue of individual documents
referenced (see 2.2.1).
c.
Packaging requirements (see 5.1).
d.
Lead finish (see 3.4.1).
e.
Type designation and quality assurance level.
6.3 Qualification. With respect to products requiring qualification, awards will be made only for products which
are, at the time of award of contract, qualified for inclusion in Qualified Manufacturer’s List (QML) whether or not
such products have actually been so listed by that date. The attention of the contractors is called to these
requirements, and manufacturers are urged to arrange to have the products that they propose to offer to the Federal
Government tested for qualification in order that they may be eligible to be awarded contracts or orders for the
products covered by this specification. Information pertaining to qualification of products may be obtained from
Defense Supply Center Columbus, ATTN: DSCC/VQE, P. O. Box 3990, Columbus, OH 43216-5000.
相关PDF资料
PDF描述
JANTX2N3251A TRANSISTOR | BJT | PNP | 60V V(BR)CEO | 200MA I(C) | TO-18
JANTX2N3418 TRANSISTOR | BJT | NPN | 60V V(BR)CEO | 3A I(C) | TO-5
JANTX2N3418S TRANSISTOR | BJT | NPN | 60V V(BR)CEO | 3A I(C)
JANTX2N3419 TRANSISTOR | BJT | NPN | 80V V(BR)CEO | 3A I(C) | TO-5
JANTX2N3419S TRANSISTOR | BJT | NPN | 80V V(BR)CEO | 3A I(C) | TO-39
相关代理商/技术参数
参数描述
JANTX2N3251A 制造商:Microsemi Corporation 功能描述:TRANS GP BJT PNP 60V 0.2A 3PIN TO-39 - Bulk
JANTX2N3251AUB 功能描述:TRANS PNP 60V 0.2A TO-39 制造商:microsemi ire division 系列:军用,MIL-PRF-19500/323 包装:散装 零件状态:在售 晶体管类型:PNP 电流 - 集电极(Ic)(最大值):200mA 电压 - 集射极击穿(最大值):60V 不同?Ib,Ic 时的?Vce 饱和值(最大值):500mV @ 5mA,50mA 电流 - 集电极截止(最大值):10μA(ICBO) 不同?Ic,Vce?时的 DC 电流增益(hFE)(最小值):100 @ 10mA,1V 功率 - 最大值:360mW 频率 - 跃迁:- 工作温度:-65°C ~ 200°C(TJ) 安装类型:表面贴装 封装/外壳:3-SMD,无引线 供应商器件封装:UB 标准包装:1
JANTX2N3330 制造商:Motorola Inc 功能描述:
JANTX2N3375 制造商:MOTOROLA 功能描述:DIODE
JANTX2N3418 制造商:Aeroflex / Metelics 功能描述:NPN POWER TRANSISTOR - Bulk 制造商:Microsemi Corporation 功能描述:TRANS GP BJT NPN 60V 3A 3PIN TO-5 - Bulk