- 您现在的位置：买卖IC网 > PDF目录299233 > JANTX2N5415UA BJT PDF资料下载
参数资料
| 型号： | JANTX2N5415UA |
| 英文描述： | BJT |
| 中文描述： | 双极型晶体管 |
| 文件页数： | 18/19页 |
| 文件大小： | 103K |
| 代理商： | JANTX2N5415UA |
MIL-PRF-19500/512E
8
2.3 Order of precedence. In the event of a conflict between the text of this document and the references cited
herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws
and regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 General. The requirements for acquiring the product described herein shall consist of this document and
MIL-PRF-19500.
3.2 Qualification. Devices furnished under this specification shall be products that are manufactured by a
manufacturer authorized by the qualifying activity for listing on the applicable qualified manufacturer's list (QML)
before contract award (see 4.2 and 6.3).
3.3 Abbreviations, symbols, and definitions. Abbreviations, symbols, and definitions used herein shall be as
specified in MIL-PRF-19500.
3.4 Interface and physical dimensions. The interface and physical dimensions shall be as specified in
MIL-PRF-19500 and on figures 1, 2, 3, 4, and 5 herein.
3.4.1 Lead finish. Lead finish shall be solderable in accordance with MIL-PRF-19500, MIL-STD-750 and herein.
Where a choice of lead finish is desired, it shall be specified in the acquisition document (see 6.2).
3.5 Marking. Marking shall be in accordance with MIL-PRF-19500.
3.6 Electrical performance characteristics. Unless otherwise specified herein, the electrical performance
characterics are as specified in 1.3, 1.4 and table I herein.
3.7 Electrical test requirements. The electrical test requirements shall be the subgroups specified in 4.4.2 and
4.4.3 herein.
3.8 Workmanship. Semiconductor devices shall be processed in such a manner as to be uniform in quality and
shall be free from other defects that will affect life, serviceability, or appearance.
4. VERIFICATION
4.1 Classification of inspections. The inspection requirements specified herein are classified as follows:
a.
Qualification inspection (see 4.2).
b.
Screening (see 4.3).
c.
Conformance inspection (see 4.4).
4.2 Qualification inspection. Qualification inspection shall be in accordance with MIL-PRF-19500 and as specified
herein.
相关PDF资料 |
PDF描述 |
|---|---|
| JANTX2N5416UA | BJT |
| JANTX2N5664 | TRANSISTOR | BJT | NPN | 200V V(BR)CEO | 3A I(C) | TO-66 |
| JANTX2N5665 | TRANSISTOR | BJT | NPN | 300V V(BR)CEO | 3A I(C) | TO-66 |
| JANTX2N5666 | TRANSISTOR | BJT | NPN | 200V V(BR)CEO | 3A I(C) | TO-5 |
| JANTX2N5666S | TRANSISTOR | BJT | NPN | 200V V(BR)CEO | 5A I(C) | TO-39 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| JANTX2N5416 | 制造商:Microsemi Corporation 功能描述:Trans GP BJT PNP 300V 1A 3-Pin TO-5 制造商:Microsemi Corporation 功能描述:PNP TRANSISTOR (PNP) - Bulk |
| JANTX2N5416S | 制造商:Microsemi Corporation 功能描述:Trans GP BJT PNP 300V 1A 3-Pin TO-39 制造商:Microsemi Corporation 功能描述:PNP TRANSISTOR (PNP) - Bulk 制造商:Microsemi 功能描述:Trans GP BJT PNP 300V 1A 3-Pin TO-39 |
| JANTX2N5416U4 | 功能描述:TRANS PNP 300V 1A 制造商:microsemi ire division 系列:军用，MIL-PRF-19500/485 包装:散装 零件状态:在售 晶体管类型:PNP 电流 - 集电极（Ic）（最大值）:1A 电压 - 集射极击穿（最大值）:300V 不同?Ib，Ic 时的?Vce 饱和值（最大值）:2V @ 5mA，50mA 电流 - 集电极截止（最大值）:1mA 不同?Ic，Vce?时的 DC 电流增益（hFE）（最小值）:30 @ 50mA，10V 功率 - 最大值:1W 频率 - 跃迁:- 工作温度:-65°C ~ 200°C（TJ） 安装类型:表面贴装 封装/外壳:3-SMD，无引线 供应商器件封装:U4 标准包装:1 |
| JANTX2N5416UA | 制造商:Microsemi Corporation 功能描述:PNP TRANSISTOR - Bulk |
| JANTX2N5581 | 制造商:Microsemi Corporation 功能描述:TRANS GP BJT NPN 50V 0.8A 3PIN TO-46 - Bulk |
发布紧急采购，3分钟左右您将得到回复。