参数资料
型号: JN5139/001,531
厂商: NXP Semiconductors
文件页数: 15/82页
文件大小: 0K
描述: MCU 802.15.4 32BIT 2.4G 56-QFN
标准包装: 500
系列: JN5139-001Rx
频率: 2.4GHz
调制或协议: 802.15.4 Zigbee
应用: 通用
功率 - 输出: 3dBm
灵敏度: -96dBm
电源电压: 2.7 V ~ 3.6 V
电流 - 接收: 37mA
电流 - 传输: 37mA
数据接口: PCB,表面贴装
存储容量: 96kB RAM,192kB ROM
天线连接器: PCB,表面贴装
工作温度: -40°C ~ 85°C
封装/外壳: 56-VFQFN
包装: 带卷 (TR)
4.3 OTP eFuse Memory
The JN5139 contains 48-bytes of eFuse memory; this is one time programmable memory that is organised as 12 x
32-bit words, 4 words are reserved by Jennic and 4 words are reserved for future use. The remaining 4 words are
fully user programmable, designed to allow for the storage of a 128-bit encryption key for secure external memory
encryption (see section 4.4.1)
For full details on how to program and use the eFuse memory, please refer to application note JN-AN-1062 Using
OTP eFuse Memory [3].
Alternatively, Jennic can provide an eFuse programming service for customers that wish to use the eFuse but do not
wish to undertake this for themselves. For further details of this service, please contact your local Jennic sales office.
4.4 External Memory
An external memory with an SPI interface may be used to provide storage for program code and data for the device
when external power is removed. The memory is connected to the SPI interface using select line SPISEL0; this
select line is dedicated to the external memory interface and is not available for use with other external devices. See
Figure 8 for connection details.
JN5139
SPISEL0
SPIMISO
SPIMOSI
SPICLK
Serial
Memory
SS
SDO
SDI
CLK
Figure 8: Connecting External Serial Memory
At reset, the contents of this memory are copied into RAM by the software boot loader. The Flash memory devices
that are supported as standard through the JN5139 bootloader are given in Table 1. Jennic recommends that where
possible one of these devices should be selected.
Manufacturer
SST (Silicon Storage Technology)
Numonyx
Device Number
25VF010A (1Mbyte device)
M25P10-A (1Mbyte device),
M25P40 (4Mbyte device)
Table 1: Supported Flash Memories
Applications wishing to use an alternate Flash memory device should refer to application note JN-AN-1038
Programming Flash devices not supported by the JN51xx ROM-based bootloader [4]. This application note provides
guidance on developing an interface to an alternate device.
4.4.1 External Memory Encryption
The contents of the external serial memory can be encrypted. The AES security processor combined with a user
programmable 128-bit encryption key is used to encrypt the contents of the external memory. The encryption key is
stored in eFuse.
? NXP Laboratories UK 2010
JN-DS-JN5139 1v9
15
相关PDF资料
PDF描述
JN5139-EK000 KIT EVAL IEEE802.15.4 JN5139
JN5139/Z01,515 IC MCU ZIGBEE 32BIT 2.4G 56QFN
JN5139-Z01-M/02R1V MODULE ZIGBEE SMA CONN HP JN5139
JN5148/001M04T,534 MODULE ZIGBEE PRO HP U.FL CONN
JN5148-UG010 KIT UPGRADE ZIGBEE PRO
相关代理商/技术参数
参数描述
JN5139-001-M/00R1T 功能描述:Zigbee/802.15.4模块 WIRELESS MCU IEEE802.15.4 TRNSCVR RoHS:否 制造商:Digi International 频带:902 MHz to 928 MHz 视线范围: 数据速率: 灵敏度: 工作电源电压:2.4 V to 3.6 V 传输供电电流:215 mA 接收供电电流:26 mA 输出功率:250 mW 天线连接器类型:Wire 最大工作温度:+ 85 C 尺寸:32.94 mm x 22 mm x 2.03 mm
JN5139-001-M/01R1V 功能描述:Zigbee/802.15.4模块 WIRELESS MCU IEEE802.15.4 TRNSCVR RoHS:否 制造商:Digi International 频带:902 MHz to 928 MHz 视线范围: 数据速率: 灵敏度: 工作电源电压:2.4 V to 3.6 V 传输供电电流:215 mA 接收供电电流:26 mA 输出功率:250 mW 天线连接器类型:Wire 最大工作温度:+ 85 C 尺寸:32.94 mm x 22 mm x 2.03 mm
JN5139-001-M/02R1V 功能描述:Zigbee/802.15.4模块 WIRELESS MCU IEEE802.15.4 TRNSCVR RoHS:否 制造商:Digi International 频带:902 MHz to 928 MHz 视线范围: 数据速率: 灵敏度: 工作电源电压:2.4 V to 3.6 V 传输供电电流:215 mA 接收供电电流:26 mA 输出功率:250 mW 天线连接器类型:Wire 最大工作温度:+ 85 C 尺寸:32.94 mm x 22 mm x 2.03 mm
JN5139-001-M/03R1T 功能描述:Zigbee/802.15.4模块 WIRELESS MCU IEEE802.15.4 TRNSCVR RoHS:否 制造商:Digi International 频带:902 MHz to 928 MHz 视线范围: 数据速率: 灵敏度: 工作电源电压:2.4 V to 3.6 V 传输供电电流:215 mA 接收供电电流:26 mA 输出功率:250 mW 天线连接器类型:Wire 最大工作温度:+ 85 C 尺寸:32.94 mm x 22 mm x 2.03 mm
JN5139-001-M/04R1T 功能描述:Zigbee/802.15.4模块 WIRELESS MCU IEEE802.15.4 TRNSCVR RoHS:否 制造商:Digi International 频带:902 MHz to 928 MHz 视线范围: 数据速率: 灵敏度: 工作电源电压:2.4 V to 3.6 V 传输供电电流:215 mA 接收供电电流:26 mA 输出功率:250 mW 天线连接器类型:Wire 最大工作温度:+ 85 C 尺寸:32.94 mm x 22 mm x 2.03 mm