参数资料
型号: KSZ8873MLL
厂商: Micrel Inc
文件页数: 51/115页
文件大小: 0K
描述: IC ETHERNET SWITCH 3PORT 64-LQFP
产品培训模块: KSZ8873 Ethernet Switches
特色产品: KSZ8873 Ethernet Switch Controller
标准包装: 160
控制器类型: 以太网开关控制器
接口: MII
电源电压: 1.8V,2.5V,3.3V
工作温度: 0°C ~ 70°C
安装类型: 表面贴装
封装/外壳: 64-LQFP
供应商设备封装: 64-LQFP(10x10)
包装: 托盘
产品目录页面: 1081 (CN2011-ZH PDF)
其它名称: 576-3459
Micrel, Inc.
KSZ8873MLL/FLL/RLL
September 20, 2013
40
Revision 1.6
Table 13. Tail Tag Rules
Ingress to Port 3 (Host -> KSZ8873MLL/FLL/RLL)
Bit [1,0]
Destination Port
0,0
Normal (Address Look up)
0,1
Port 1
1,0
Port 2
1,1
Port 1 and 2
Bit [3,2]
Frame Priority
0,0
Priority 0
0,1
Priority 1
1,0
Priority 2
1,1
Priority 3
Egress from Port 3 (KSZ8873MLL/FLL/RLL->Host)
Bit [0]
Source Port
0
Port 1
1
Port 2
IGMP Support
For Internet Group Management Protocol (IGMP) support in layer 2, the KSZ8873MLL/FLL/RLL provides two
components, IGMP snooping and IGMP send-back to the subscribed port.
IGMP Snooping
The KSZ8873MLL/FLL/RLL traps IGMP packets and forwards them only to the processor (port 3). The IGMP packets are
identified as IP packets (either Ethernet IP packets, or IEEE 802.3 SNAP IP packets) with IP version = 0x4 and protocol
version number = 0x2.
IGMP Send-Back to the Subscribed Port
Once the host responds the received IGMP packet, the host should knows the original IGMP ingress port and send back
the IGMP packet to this port only, otherwise this IGMP packet will be broadcasted to all port to downgrade the
performance.
Enable the tail tag mode, the host will know the IGMP packet received port from tail tag bits [0] and can send back the
response IGMP packet to this subscribed port by setting the bits [1,0] in the tail tag. Enable “Tail tag mode” by setting
Register 3 bit 6. The tail tag will be removed automatically when the IGMP packet is sent out from the subscribed port.
Port Mirroring Support
KSZ8873MLL/FLL/RLL supports “Port Mirroring” comprehensively as:
“receive only” mirror on a port
All the packets received on the port are mirrored on the sniffer port. For example, port 1 is programmed to be “receive
sniff” and port 3 is programmed to be the “sniffer port”. A packet received on port 1 is destined to port 2 after the
internal lookup. The KSZ8873MLL/FLL/RLL forwards the packet to both port 2 and port 3. The KSZ8873MLL/FLL/RLL
can optionally even forward “bad” received packets to the “sniffer port”.
“transmit only” mirror on a port
All the packets transmitted on the port are mirrored on the sniffer port. For example, port 1 is programmed to be
“transmit sniff” and port 3 is programmed to be the “sniffer port”. A packet received on port 2 is destined to port 1 after
the internal lookup. The KSZ8873MLL/FLL/RLL forwards the packet to both port 1 and port 3.
“receive and transmit” mirror on two ports
相关PDF资料
PDF描述
KSZ8863RLL IC ETHERNET SW 3PORT 48-LQFP
KSZ8863MLL IC ETHERNET SW 3PORT 48-LQFP
KSZ8863FLL IC ETHERNET SW 3PORT 48-LQFP
LTC4267IDHC#PBF IC POE 802.3AF INTERFACE 16-DFN
000-68175-11RFX BNC PLUG CRIMP PLENUM 59
相关代理商/技术参数
参数描述
KSZ8873MLL AM 功能描述:以太网 IC 3-Port 10/100 Ethernet Switch with 1x MII Interface (Automotive Grade, Lead Free) RoHS:否 制造商:Micrel 产品:Ethernet Switches 收发器数量:2 数据速率:10 Mb/s, 100 Mb/s 电源电压-最大:1.25 V, 3.45 V 电源电压-最小:1.15 V, 3.15 V 最大工作温度:+ 85 C 封装 / 箱体:QFN-64 封装:Tray
KSZ8873MLL AM TR 功能描述:以太网 IC 3-Port 10/100 Ethernet Switch with 1x MII Interface (Automotive Grade, Lead Free) RoHS:否 制造商:Micrel 产品:Ethernet Switches 收发器数量:2 数据速率:10 Mb/s, 100 Mb/s 电源电压-最大:1.25 V, 3.45 V 电源电压-最小:1.15 V, 3.15 V 最大工作温度:+ 85 C 封装 / 箱体:QFN-64 封装:Tray
KSZ8873MLL/8863MLL 制造商:Micrel Inc 功能描述:EVAL BOARD
KSZ8873MLL_09 制造商:MICREL 制造商全称:Micrel Semiconductor 功能描述:Integrated 3-Port 10/100 Managed Switch with PHYs
KSZ8873MLL_11 制造商:MICREL 制造商全称:Micrel Semiconductor 功能描述:Integrated 3-Port 10/100 Managed Switch with PHYs