- 您现在的位置：买卖IC网 > Datasheet目录625 > LD4006P0 (Red Lion Controls)COUNTER 6 DIGIT DUAL 4.0" RED Datasheet资料下载
参数资料
| 型号： | LD4006P0 |
| 厂商： | Red Lion Controls |
| 文件页数： | 12/16页 |
| 文件大小： | 0K |
| 描述： | COUNTER 6 DIGIT DUAL 4.0" RED |
| 标准包装： | 1 |
| 系列： | LD |
| 计数速率： | 35kHz |
| 数字/字母数： | 6 |
| 输入类型： | 电压、开关外壳、晶体管开关 |
| 输出类型： | 继电器和 RS232/RS485 |
| 电源电压： | 11 V ~ 16 VDC，85 V ~ 250 VAC |
| 显示器类型： | LED 红 |
SETPOINT ASSIGNMENT
SETPOINT BOUNDARY TYPE
????? ?
? ???? ?
???? ?
???? ?
????
?????? ?
? ??????
?????? ??????
Select the display the Setpoint is to be assigned.
High Acting Boundary Type activates the output when the assigned display
value ( ????? ) equals or exceeds the Setpoint value. Low Acting activates the
output when the assigned display value is less than or equal to the Setpoint.
SETPOINT OUTPUT ACTION
????? ?
? ?????
?????? ?
?????
?????
?????
This parameter selects the action of the Setpoint output as described in the
chart below. Boundary mode is not applicable for Counter B assignment.
? ??
SETPOINT STANDBY OPERATION
?? ???
SPT ACTION DESCRIPTION
OUTPUT ACTIVATES
OUTPUT DEACTIVATES
This parameter only applies to Low Acting Boundary Type setpoints. Select
??? to disable a Low Acting Setpoint at power-up, until the assigned display
?????
?????
Latched Output Mode
Timed Output Mode
When Count =
Setpoint
When Count =
Setpoint
At Manual Reset
(if ????? = ??? )
After Setpoint
Output Time-Out
value crosses into the output “off” area. Once in the output “off” area, the
Setpoint will then function per the description for Low Acting Boundary Type.
?????
Boundary Mode When Count ??
(High Acting) Setpoint
Boundary Mode When Count ??
(Low Acting) Setpoint
SETPOINT OUTPUT TIME-OUT
When Count
< Setpoint
When Count
> Setpoint
?????? ?
? ??
COUNTER AUTO RESET
?? ??????
??????
??????
??????
?????? ?
? ??????
????? to ? ??????? seconds
This parameter automatically resets the Setpoint Assigned Counter (A or B)
each time the Setpoint value is reached. The automatic reset can occur at output
start, or output end if the Setpoint Output Action is programmed for timed
output mode. The Reset-to-Count Load selections (“ ???? ”) only apply to
This parameter is only active if the Setpoint Action is set to timed output
mode ( ????? ). Enter the value in seconds that the output will be active, once
the Setpoint Value is reached.
Counter A assignment. This reset may be different from the Counter A Reset
Action selected in Module 1.
SELECTION ACTION
??
No Auto Reset
SETPOINT VALUE
??????
??????
Reset to Zero at the Start of output activation
Reset to Count Load value at the Start of output activation
????? ?
? ??????
Count A:
Count B:
? ????? to ??????
? to ?????
??????
??????
Reset to Zero at the End of output activation (timed out only)
Reset to Count Load at the End of output activation (timed out only)
Rate:
? to ?????
?????? ?
Enter the desired Setpoint value. To enter a negative setpoint value,
increment digit 6 to display a “-” sign (Counter A only).
SETPOINT 1 OUTPUT OFF AT SETPOINT 2 (SP1 Only)
??
SETPOINT OUTPUT LOGIC
?
??
??????
??????
?????
?
?
???
???
???
This parameter will deactivate Setpoint 1 output at the Start or End of
Setpoint 2 output (O1 off at O2). The “ ???? ” setting only applies if Setpoint 2
Output Action is programmed for timed output.
Normal ( ??? ) turns the output “on” when activated and “off” when
????? ?
?
?????? ?
?
??
deactivated. Reverse ( ??? ) turns the output “off” when activated and “on”
when deactivated.
SETPOINT ANNUNCIATOR
??? ???
???
Normal ( ??? ) displays the setpoint annunciator when the corresponding output
SETPOINT 2 OUTPUT OFF AT SETPOINT 1 (SP2 Only)
??
??????
??????
This parameter will deactivate Setpoint 2 output at the Start or End of
Setpoint 1 output (O2 off at O1). The “ ???? ” setting only applies if Setpoint 1
Output Action is programmed for timed output.
is “on”. Reverse ( ??? ) displays the setpoint annunciator when the output is “off”.
SETPOINT OUTPUT RESET WITH MANUAL RESET
?????? ?
?
???
?
???
SETPOINT OUTPUT POWER-UP STATE
???
??
????
???? will restore the output to the same state it was at before the meter was
powered down. ?? will activate the output at power up. ??? will deactivate the
output at power up.
12
????? ?
?? ???
Selecting ??? causes the Setpoint output to deactivate (reset) when the
Setpoint Assigned Counter is reset. The counter reset can occur by the RST ??
key, User Input or Counter Reset at Power-up.
This output reset will not occur when the Assigned Counter is reset by a
Setpoint generated Counter Auto Reset.
相关PDF资料 |
PDF描述 |
|---|---|
| LD412460 | DIODE MOD ISO DUAL 2400V 600A |
| LIRT220A | CONTROL RELAY CURRENT 220VAC |
| LNXC2000 | COUNTER DUAL PRESET 115VAC |
| LP-56-850 | XFRMR 115/230V 28V 1.7A 48VA PCB |
| LS412460 | DIODE MOD ISO SGL 2400V 600A |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LD400-AC | 制造商:MRV 制造商全称:MRV 功能描述:LambdaDriver Chassis - DWDM/CWDM Platform |
| LD400-DC | 制造商:MRV 制造商全称:MRV 功能描述:LambdaDriver Chassis - DWDM/CWDM Platform |
| LD400L-2AC | 制造商:MRV 制造商全称:MRV 功能描述:LambdaDriver Chassis - DWDM/CWDM Platform |
| LD400L-2DC | 制造商:MRV 制造商全称:MRV 功能描述:LambdaDriver Chassis - DWDM/CWDM Platform |
| LD400L-AC | 制造商:MRV 制造商全称:MRV 功能描述:LambdaDriver Chassis - DWDM/CWDM Platform |
发布紧急采购，3分钟左右您将得到回复。