- 您现在的位置：买卖IC网 > PDF目录15611 > LFM34INTPU1A (Freescale Semiconductor)ADAPTER MPC5534 324-BGA PDF资料下载
参数资料
| 型号： | LFM34INTPU1A |
| 厂商： | Freescale Semiconductor |
| 文件页数： | 51/60页 |
| 文件大小： | 0K |
| 描述： | ADAPTER MPC5534 324-BGA |
| 标准包装： | 1 |
| 模块/板类型： | 适配器板 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页当前第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页
Revision History for the MPC5534 Data Sheet
MPC5534 Microcontroller Data Sheet, Rev. 6
Freescale Semiconductor
55
Table 6, VCR/POR Electrical Specifications:
Added footnote 1 to specs 1, 2, and 3 that reads: On power up, assert RESET before VPOR15, VPOR33, and VPOR5
negate (internal POR). RESET must remain asserted until the power supplies are within the operating conditions
as specified in Table 9 DC Electrical Specifications. On power down, assert RESET before any power supplies
fall outside the operating conditions and until the internal POR asserts.
Subscript all symbol names that appear after the first underscore character.
Removed ‘Tj ‘ after ‘150 C’ in Spec 10, Characteristic column:
Added footnote 1 to specs 1, 2, and 3 that reads: On power up, assert RESET before VPOR15, VPOR33, and VPOR5
negate (internal POR). RESET must remain asserted until the power supplies are within the operating conditions
as specified in Table 9 DC Electrical Specifications. On power down, assert RESET before any power supplies
fall outside the operating conditions and until the internal POR asserts.
Added to Spec 2:
3.3 V (VDDSYN) POR negated (ramp down)
Min 0.0
Max 0.30
V
3.3 V (VDDSYN) POR asserted (ramp up)
Min 0.0
Max 0.30
V
Spec 3: Added new footnote 3 for both lines: ‘It is possible to reach the current limit during ramp up--do not treat
this event as a short circuit current.’
Spec 5: Changed old Footnote 1 (now footnote 2): ‘User must be able to supply full operating current for the 1.5 V
supply when the 3.3 V supply reaches this range.” to ‘Supply full operating current for the 1.5 V supply when the
3.3 V supply reaches this range.”
Specs 7 and 10: added ‘at Tj ‘ at the end of the first line in the second column: Characteristic.
Spec 10:
Added cross-reference to footnote 6: ‘IVRCCTL is measured at the following conditions: VDD = 1.35 V,
VRC33 = 3.1 V, VVRCCTL = 2.2 V.’ Changed ‘(@ VDD = 1.35 V, fsys = fMAX)‘ to ‘(@ fsys = fMAX).
Added old footnote 5 new footnote 6.
Added a new footnote 7, ‘Refer to Table 1 for the maximum operating frequency.’
Rewrote old footnote 8 (new footnote 9) to: Represents the worst-case external transistor BETA. It is measured
on a per part basis and calculated as (IDD IVRCCTL).
Deleted footnote 9 Preliminary value, Final specification pending characterization.
Table 7, Power Sequence Pin Status for Fast Pads: Changed title to Pin Status for Fast Pads During the Power Sequence
Table 8, Power Sequence Pin Status for Medium/Slow Pads:
Changed title to Pin Status for Medium and Slow Pads During the Power Sequence
Updated preceding paragraph.
Table 9, DC Electrical Specifications:
Spelled out meaning of the slash ‘/’ as ‘and’. Still confusing. Deleted ‘I/O’ from the specs to improve clarity.
Added footnote that reads: VDDE2 and VDDE3 are limited to 2.25–3.6 V only if EBTS = 0; VDDE2 and VDDE3 have
a range of 1.6–3.6 V if EBTS =1.
Spec 20, column 2, Characteristics,’ Slow and medium output high voltage (IOH_S = –2.0 mA):’
Created a left-justified second line and moved ‘IOH_S = –2.0 mA’ from the 1st line to the second line and deleted
the parentheses. Created a left-justified third line that reads ‘IOH_S = –1.0 mA.’
Spec 20, column 4, Min: Added a blank line before and after ‘0.80
V
DDEH’ and put ‘0.85 VDDEH’ on the last line.
Spec 22, column 2, ’Slow and medium output low voltage (IOL_S = 2.0 mA):’ Created a left-justified second line
and moved ‘IOL_S = 2.0 mA.’ from the 1st line to the second line and deleted the parentheses. Created a
left-justified third line that reads ‘IOL_S = 1.0 mA.’
Spec 22, column 5, Max: Added a blank line before and after ‘0.20
V
DDEH’ and put ‘0.15 VDDEH’ on the last
line.
Spec 26: Changed ‘AN[12]_MA[1]_SDO’ to ‘AN[13]_MA[1]_SDO’.
Spec 28: Changed 82 MHz to fMAX MHz.
Footnote 9: Changed from ‘Preliminary. Final specification pending characterization.’ to ‘ shows an illustration of
the IDD_STBY values interpolated for these temperature values.’
Table 30. Table and Figure Changes Between Rev. 3.0 and 4.0 (continued)
Location
Description of Changes
相关PDF资料 |
PDF描述 |
|---|---|
| EEM28DTKT-S288 | CONN EDGECARD 56POS .156 EXTEND |
| ADM6318CY46ARJZ-R7 | IC SUPERVISOR W/RESET SOT23-5 |
| PCG0J471MCL1GS | CAP ALUM 470UF 6.3V 20% SMD |
| MAX6442KAOSTD3+T | IC BATTERY MON DUAL SOT23-8 |
| VI-BW3-EY-F2 | CONVERTER MOD DC/DC 24V 50W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LFM-39A | 制造商:Leader 功能描述: |
| LFM53INTPU1A | 功能描述:IC 与器件插座 MPC5553 324-PIN BGA TO P RoHS:否 制造商:Molex 产品:LGA Sockets 节距:1.02 mm 排数: 位置/触点数量:2011 触点电镀:Gold 安装风格:SMD/SMT 端接类型:Solder 插座/封装类型:LGA 2011 工作温度范围:- 40 C to + 100 C |
| LFM53INTPWA | 功能描述:IC 与器件插座 MPC5553 416-PIN BGA TO P RoHS:否 制造商:Molex 产品:LGA Sockets 节距:1.02 mm 排数: 位置/触点数量:2011 触点电镀:Gold 安装风格:SMD/SMT 端接类型:Solder 插座/封装类型:LGA 2011 工作温度范围:- 40 C to + 100 C |
| LFM54INTPWA | 功能描述:插座和适配器 PB-FREE MPC5554 BGA TO P RoHS:否 制造商:Silicon Labs 产品:Adapter 用于:EM35x |
| LFM65INTPU1A | 功能描述:插座和适配器 PBSN MPC5565 324 BGA TO RoHS:否 制造商:Silicon Labs 产品:Adapter 用于:EM35x |
发布紧急采购，3分钟左右您将得到回复。