- 您现在的位置：买卖IC网 > PDF目录14815 > LT3510EFE#PBF (Linear Technology)IC REG BUCK ADJ 2A DL 20TSSOP PDF资料下载
参数资料
| 型号： | LT3510EFE#PBF |
| 厂商： | Linear Technology |
| 文件页数： | 24/30页 |
| 文件大小： | 0K |
| 描述： | IC REG BUCK ADJ 2A DL 20TSSOP |
| 标准包装： | 74 |
| 类型： | 降压（降压） |
| 输出类型： | 可调式 |
| 输出数： | 2 |
| 输出电压： | 0.8 V ~ 23.8 V |
| 输入电压： | 3.1 V ~ 25 V |
| PWM 型： | 电流模式 |
| 频率 - 开关： | 250kHz ~ 1.5MHz |
| 电流 - 输出： | 2A |
| 同步整流器： | 无 |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 20-TSSOP（0.173"，4.40mm 宽）裸露焊盘 |
| 包装： | 管件 |
| 供应商设备封装： | 20-TSSOP-EP |
| 产品目录页面： | 1332 (CN2011-ZH PDF) |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页当前第24页第25页第26页第27页第28页第29页第30页
LT3510
APPLICATIONS INFORMATION
V IN LT3510 SW
GND
(11a)
V IN LT3510 SW
GND
(11b)
V IN LT3510 SW
GND
(11c)
3510 F11
Figure 11. Subtracting the Current when the Switch is On (11a) from the Current when the Switch is Off (11b) Reveals the Path of the
High Frequency Switching Current (11c). Keep this Loop Small. The Voltage on the SW and BST Traces will Also Be Switched; Keep
These Traces as Short as Possible. Finally, Make Sure the Circuit is Shielded with a Local Ground Plane
PCB Layout
For proper operation and minimum EMI, care must be taken
during printed circuit board (PCB) layout. Figure 11 shows
the high di/dt paths in the buck regulator circuit.
Note that large switched currents ?ow in the power switch,
the catch diode and the input capacitor. The loop formed
by these components should be as small as possible.
These components, along with the inductor and output
capacitor, should be placed on the same side of the circuit
board and their connections should be made on that layer.
Place a local, unbroken ground plane below these com-
ponents, and tie this ground plane to system ground at
one location, ideally at the ground terminal of the output
capacitor C2. Additionally, the SW and BST traces should
be kept as short as possible. The topside metal from the
DC964A demonstration board in Figure 12 illustrates proper
component placement and trace routing.
Thermal Considerations
The PCB must also provide heat sinking to keep the LT3510
cool. The exposed metal on the bottom of the package
must be soldered to a ground plane. This ground should
be tied to other copper layers below with thermal vias;
these layers will spread the heat dissipated by the LT3510.
Place additional vias near the catch diodes. Adding more
copper to the top and bottom layers and tying this copper
Figure 12. Topside PCB Layout
3510fe
24
相关PDF资料 |
PDF描述 |
|---|---|
| LT3686HDD#PBF | IC REG BUCK ADJ 1.2A 10-DFN |
| 380LX123M016H022 | CAP ALUM 12000UF 16V 20% SNAP |
| EGM28DTKH | CONN EDGECARD 56POS DIP .156 SLD |
| ECO-S1KA562EA | CAP ALUM 5600UF 80V 20% SNAP |
| LT1308ACS8#PBF | IC REG BOOST 5V 1A 8SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LT3510EFE-TR | 制造商:LINER 制造商全称:Linear Technology 功能描述:Monolithic Dual Tracking 2A Step-Down Switching Regulator |
| LT3510EFE-TRPBF | 制造商:LINER 制造商全称:Linear Technology 功能描述:Monolithic Dual Tracking 2A Step-Down Switching Regulator |
| LT3510FE | 制造商:LINER 制造商全称:Linear Technology 功能描述:Monolithic Dual Tracking 2A Step-Down Switching Regulator |
| LT3510IFE | 制造商:Linear Technology 功能描述:Conv DC-DC Dual Step Down 3.1V to 25V 20-Pin TSSOP EP |
| LT3510IFE#PBF | 功能描述:IC REG BUCK ADJ 2A DL 20TSSOP RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 产品培训模块:MIC23xxx HyperLight Load™ Regulators 标准包装:5,000 系列:HyperLight Load® 类型:降压（降压） 输出类型:固定 输出数:1 输出电压:1.8V 输入电压:2.7 V ~ 5.5 V PWM 型:混合物 频率 - 开关:4MHz 电流 - 输出:2A 同步整流器:是 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:8-VFDFN 裸露焊盘，8-MLF? 包装:带卷 (TR) 供应商设备封装:8-MLF?（2x2） 产品目录页面:1094 (CN2011-ZH PDF) 其它名称:576-3303-2 |
发布紧急采购，3分钟左右您将得到回复。