参数资料
型号: M295V800AB90M1T
厂商: 意法半导体
元件分类: 圆形连接器
英文描述: Circular Connector; No. of Contacts:37; Series:JT02R; Body Material:Aluminum; Connecting Termination:Crimp; Connector Shell Size:14; Circular Contact Gender:Socket; Circular Shell Style:Box Mount Receptacle; Insert Arrangement:14-35
中文描述: 8兆1兆x8或512KB的x16插槽,启动座单电源闪存
文件页数: 10/21页
文件大小: 142K
代理商: M295V800AB90M1T
M29F800AT, M29F800AB
10/21
Figure 3. Data Polling Flowchart
READ DQ5 &
DQ7
at VALID ADDRESS
START
READ DQ7
FAIL
PASS
AI01369
DQ7
DATA
YES
NO
YES
NO
DQ5
= 1
DQ7
DATA
YES
NO
Figure 4. Data Toggle Flowchart
READ
DQ5 & DQ6
START
READ DQ6
FAIL
PASS
AI01370
DQ6
TOGGLE
NO
NO
YES
YES
DQ5
= 1
NO
YES
DQ6
TOGGLE
Toggle Bit (DQ6).
The Toggle Bit can be used to
identify whether the Program/Erase Controller has
successfully completed its operation or if it has re-
sponded to an Erase Suspend. The Toggle Bit is
output on DQ6 when the Status Register is read.
During Program and Erase operations the Toggle
Bit changes from ’0’ to ’1’ to ’0’, etc., with succes-
sive Bus Read operations at any address. After
successful completion of the operation thememo-
ry returns to Read mode.
During Erase Suspend mode the Toggle Bit will
output when addressing a cell within a block being
erased. The Toggle Bit will stoptoggling when the
Program/Erase Controller has suspended the
Erase operation.
Figure 4, Data Toggle Flowchart, gives an exam-
ple of how to use the Data Toggle Bit.
Error Bit (DQ5).
The Error Bit can be used to
identify errors detected by the Program/Erase
Controller. The Error Bit is set to ’1’ when a Pro-
gram, Block Erase orChip Erase operation fails to
write the correct data to the memory. If the Error
Bit is set a Read/Reset command must be issued
before other commands are issued. The Error bit
is output onDQ5 when the Status Register is read.
Note that the Programcommand cannot change a
bit set at ’0’ backto ’1’ and attempting to do so will
cause an error. One of the Erase Commands must
be used to set all the bits in a blockor in thewhole
memory from ’0’ to ’1’.
Erase Timer Bit (DQ3).
The Erase Timer Bit can
be used to identify the start of Program/Erase
Controller operation during a Block Erase com-
mand. Once the Program/Erase Controller starts
erasing the Erase Timer Bit is set to ’1’. Before the
Program/Erase Controller starts the Erase Timer
Bit is set to ’0’ and additional blocks to be erased
may be written to the Command Interface. The
Erase Timer Bit is output on DQ3 when the Status
Register is read.
相关PDF资料
PDF描述
M29DW128F60NF1 128 Mbit (16Mb x8 or 8Mb x16, Multiple Bank, Page, Boot Block) 3V Supply, Flash Memory
M29DW128F60NF1E 128 Mbit (16Mb x8 or 8Mb x16, Multiple Bank, Page, Boot Block) 3V Supply, Flash Memory
M29DW128F60NF1F 128 Mbit (16Mb x8 or 8Mb x16, Multiple Bank, Page, Boot Block) 3V Supply, Flash Memory
M29DW128F60NF1T 128 Mbit (16Mb x8 or 8Mb x16, Multiple Bank, Page, Boot Block) 3V Supply, Flash Memory
M29DW128F60NF6 128 Mbit (16Mb x8 or 8Mb x16, Multiple Bank, Page, Boot Block) 3V Supply, Flash Memory
相关代理商/技术参数
参数描述
M295V800AB90M3T 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:8 Mbit 1Mb x8 or 512Kb x16, Boot Block Single Supply Flash Memory
M295V800AB90M6T 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:8 Mbit 1Mb x8 or 512Kb x16, Boot Block Single Supply Flash Memory
M295V800AB90N1T 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:8 Mbit 1Mb x8 or 512Kb x16, Boot Block Single Supply Flash Memory
M295V800AB90N3T 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:8 Mbit 1Mb x8 or 512Kb x16, Boot Block Single Supply Flash Memory
M295V800AB90N6T 制造商:STMICROELECTRONICS 制造商全称:STMicroelectronics 功能描述:8 Mbit 1Mb x8 or 512Kb x16, Boot Block Single Supply Flash Memory