参数资料
型号: M306K9F8LRP
元件分类: 微控制器/微处理器
英文描述: 16-BIT, FLASH, 16 MHz, MICROCONTROLLER, PQFP144
封装: 16 X 16 MM, 0.40 MM PITCH, PLASTIC, TQFP-144
文件页数: 58/101页
文件大小: 2590K
代理商: M306K9F8LRP
Interrupt
Rev.1.00
Jun 06, 2003
page 42 of 290
M16C/6K9 Group
Hardware Interrupts
Hardware interrupts are classified into two types — special interrupts and peripheral I/O interrupts.
(1) Special interrupts
Special interrupts are non-maskable interrupts.
Reset
____________
Reset occurs if an “L” is input to the RESET pin.
_______
NMI interrupt
_______
An NMI interrupt occurs if an “L” is input to the NMI pin.
________
DBC interrupt
This interrupt is exclusively for the debugger, do not use it in other circumstances.
Watchdog timer interrupt
Generated by the watchdog timer.
Single-step interrupt
This interrupt is exclusively for the debugger, do not use it in other circumstances. With the debug flag (D
flag) set to “1”, a single-step interrupt occurs after one instruction is executed.
Address match interrupt
An address match interrupt occurs immediately before the instruction held in the address indicated by the
address match interrupt register is executed with the address match interrupt enable bit set to “1”.
If an address other than the first address of the instruction in the address match interrupt register is set, no
address match interrupt occurs.
(2) Peripheral I/O interrupts
A peripheral I/O interrupt is generated by one of built-in peripheral functions. Built-in peripheral functions are
dependent on classes of products, so the interrupt factors are also dependent on classes of products. The
interrupt vector table is the same as the one for software interrupt numbers 0 through 31 the INT instruction
uses. Peripheral I/O interrupts are maskable interrupts.
1)Bus collision detection interrupt
This is an interrupt that the serial I/O bus collision detection generates.
2)DMA0 interrupt, DMA1 interrupt
These are interrupts that DMA generates.
3)Key-input interrupt 0
___
A key-input interrupt occurs if an “L” is input to the KI pin.
4) Key-input interrupt 1
___
A key-input interrupt occurs if an “L” or “H” is input to the KI pin.
5)A-D conversion interrupt
This is an interrupt that the A-D converter generates.
6)UART0, UART1, UART2/NACK, SI/O3 and SI/O4 transmission interrupt
These are interrupts that the serial I/O transmission generates.
7)UART0, UART1, UART2/ACK, SI/O3 and SI/O4 reception interrupt
These are interrupts that the serial I/O reception generates.
8)Timer A0 interrupt through timer A4 interrupt
These are interrupts that timer A generates
9)Timer B0 interrupt through timer B5 interrupt
These are interrupts that timer B generates.
相关PDF资料
PDF描述
M306KAFCLRP 16-BIT, FLASH, 16 MHz, MICROCONTROLLER, PQFP144
M306N0MCT-XXXXFP 16-BIT, MROM, 20 MHz, MICROCONTROLLER, PQFP100
M306N5FCTGP 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP100
M306N5FCFP 16-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP100
M306N5FCVFP 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP100
相关代理商/技术参数
参数描述
M306K9FCLRP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M306K9T2-CPE 功能描述:M-SUPPORT TOOL RoHS:否 类别:编程器,开发系统 >> 内电路编程器、仿真器以及调试器 系列:- 产品变化通告:Development Systems Discontinuation 19/Jul/2010 标准包装:1 系列:* 类型:* 适用于相关产品:* 所含物品:*
M306KAFCLRP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER Description
M306N0FG 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M306N0FGT 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER