参数资料
型号: M306K9F8LRP
元件分类: 微控制器/微处理器
英文描述: 16-BIT, FLASH, 16 MHz, MICROCONTROLLER, PQFP144
封装: 16 X 16 MM, 0.40 MM PITCH, PLASTIC, TQFP-144
文件页数: 79/101页
文件大小: 2590K
代理商: M306K9F8LRP
Interrupt
Rev.1.00
Jun 06, 2003
page 61 of 290
M16C/6K9 Group
Key Input Interrupt 1
If any of the bits of key input interrupt 1 enable register (Address: 02F416) are set to “1”, the key input
interrupt 1 request occurs when a falling or a rising edge is input to one of the corresponding pins.
The effective input edge of key input interrupt 1 is determined by the edge selection bit of key input
interrupt 1 edge selection register (Address: 02F516). When the bit is set to “0”, at the falling edge,
when the bit is set to “1”, at the rising edge of the input signal to the corresponding pin, the interrupt
request occurs respectively.
When an effective rising edge or falling edge is input, “1” is set to the corresponding bit of P14 event
register (Address: 02F616). By reading the register after the interrupt occurs, the pin, which the effec-
tive edge is input, can be confirmed even if the status of that pin has been changed.
At the completion of the reading of P14 event register, the bits, whose value is “1” in reading, will be
cleared automatically. A dummy write clears the register too.
The registers, the block diagram and the timing of key input interrupt 1 are shown in Fig. DD-17, Fig.
DD-18 and Fig. DD-19 respectively.
After changing the effective edge by modifying key input interrupt 1 edge selection register, the value
of P14 event register and interrupt request bit may become “1”. A dummy write to the P14 event
register and a clear to the interrupt request bit should be done after changing the effective edge.
Same as key input interrupt edge selection register, when enabling/disabling key input interrupt 1 by
setting key input interrupt 1 enable register, the value of P14 event register and interrupt request bit
may become
“1”. A dummy write to the P14 event register and a clear to the interrupt request bit
should be done after the setting of enabling/disabling.
Fig.DD-16 P14 event register
Note : The register is "0" cleared by dummy write.
P14 event register
Bit name
Function
Bit symbol
W(Note)
R
Symbol
Address
When reset
KIN1EV
02F616
0016
KIN1EV0
b7
b6
b5
b4
b3
b2
b1
b0
P14 event bit0
0 : Without event
1 : with an event
0 : Without event
1 : with an event
0 : Without event
1 : with an event
0 : Without event
1 : with an event
0 : Without event
1 : with an event
P14 event bit1
P14 event bit2
P14 event bit3
P14 event bit4
P14 event bit5
0 : Without event
1 : with an event
KIN1EV1
KIN1EV2
KIN1EV3
KIN1EV4
KIN1EV5
0 : Without event
1 : with an event
P14 event bit6
P14 event bit7
0 : Without event
1 : with an event
KIN1EV6
KIN1EV7
相关PDF资料
PDF描述
M306KAFCLRP 16-BIT, FLASH, 16 MHz, MICROCONTROLLER, PQFP144
M306N0MCT-XXXXFP 16-BIT, MROM, 20 MHz, MICROCONTROLLER, PQFP100
M306N5FCTGP 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP100
M306N5FCFP 16-BIT, FLASH, 24 MHz, MICROCONTROLLER, PQFP100
M306N5FCVFP 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP100
相关代理商/技术参数
参数描述
M306K9FCLRP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M306K9T2-CPE 功能描述:M-SUPPORT TOOL RoHS:否 类别:编程器,开发系统 >> 内电路编程器、仿真器以及调试器 系列:- 产品变化通告:Development Systems Discontinuation 19/Jul/2010 标准包装:1 系列:* 类型:* 适用于相关产品:* 所含物品:*
M306KAFCLRP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER Description
M306N0FG 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M306N0FGT 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER