参数资料
型号: M34501M2-XXXFP
元件分类: 微控制器/微处理器
英文描述: 4-BIT, MROM, MICROCONTROLLER, PDSO20
封装: 5.30 X 12.60 MM, 1.27 MM PITCH, PLASTIC, SOP-20
文件页数: 45/118页
文件大小: 952K
代理商: M34501M2-XXXFP
Rev.3.01
2005.02.07
page 30 of 112
REJ03B0104-0301
4501 Group
WATCHDOG TIMER
Watchdog timer provides a method to reset the system when a pro-
gram run-away occurs. Watchdog timer consists of timer
WDT(16-bit binary counter), watchdog timer enable flag (WEF),
and watchdog timer flags (WDF1, WDF2).
The timer WDT downcounts the instruction clocks as the count
source from “FFFF16” after system is released from reset.
After the count is started, when the timer WDT underflow occurs
(after the count value of timer WDT reaches “FFFF16,” the next
count pulse is input), the WDF1 flag is set to “1.”
If the WRST instruction is never executed until the timer WDT un-
derflow occurs (until timer WDT counts 65534), WDF2 flag is set to
“1,” and the RESET pin outputs “L” level to reset the microcom-
puter.
Execute the WRST instruction at each period of 65534 machine
cycle or less by software when using watchdog timer to keep the
microcomputer operating normally.
When the WEF flag is set to “1” after system is released from reset,
the watchdog timer function is valid.
When the DWDT instruction and the WRST instruction are ex-
ecuted continuously, the WEF flag is cleared to “0” and the
watchdog timer function is invalid.
The WEF flag is set to "1" at system reset or RAM back-up mode.
The WRST instruction has the skip function. When the WRST in-
struction is executed while the WDF1 flag is “1”, the WDF1 flag is
cleared to “0” and the next instruction is skipped.
When the WRST instruction is executed while the WDF1 flag is “0”,
the next instruction is not skipped.
The skip function of the WRST instruction can be used even when
the watchdog timer function is invalid.
Fig. 25 Watchdog timer function
65534 count
(Note)
Value of 16-bit timer (WDT)
WDF1 flag
WRST instruction
executed
(skip executed)
RESET pin output
WDF2 flag
System reset
Reset
released
After system is released from reset (= after program is started), timer WDT starts count down.
When timer WDT underflow occurs, WDF1 flag is set to “1.”
When the WRST instruction is executed, WDF1 flag is cleared to “0,” the next instruction is skipped.
When timer WDT underflow occurs while WDF1 flag is “1,” WDF2 flag is set to “1” and the
watchdog reset signal is output.
The output transistor of RESET pin is turned “ON” by the watchdog reset signal and system reset is
executed.
Note: The number of count is equal to the number of machine cycle because the count source of watchdog timer
is the instruction clock.
FFFF16
000016
相关PDF资料
PDF描述
M34501E4FP 4-BIT, OTPROM, MICROCONTROLLER, PDSO20
M34501M4-XXXFP 4-BIT, MROM, MICROCONTROLLER, PDSO20
M34501E4FP 4-BIT, OTPROM, MICROCONTROLLER, PDSO20
M34502M2-XXXFP 4-BIT, MROM, MICROCONTROLLER, PDSO24
M34502M4-XXXFP 4-BIT, MROM, MICROCONTROLLER, PDSO24
相关代理商/技术参数
参数描述
M34501M4 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34501M4-XXXFP 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34502E4 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34502E4FP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:4-BIT CISC SINGLE-CHIP MICROCOMPUTER 4500 SERIES
M34502M2 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER