参数资料
型号: M34518E8SP
元件分类: 微控制器/微处理器
英文描述: 4-BIT, OTPROM, 6 MHz, MICROCONTROLLER, PDIP32
封装: 8.90 X 28 MM, 1.78 MM PITCH, PLASTIC, SDIP-32
文件页数: 137/162页
文件大小: 1149K
代理商: M34518E8SP
Rev.3.01
2005.06.15
page 74 of 157
REJ03B0008-0301
4518 Group
P30/INT0 pin
Note [1] on bit 3 of register I1
When the input of the INT0 pin is controlled with the bit 3 of reg-
ister I1 in software, be careful about the following notes.
Depending on the input state of the P30/INT0 pin, the external 0
interrupt request flag (EXF0) may be set when the bit 3 of regis-
ter I1 is changed. In order to avoid the occurrence of an
unexpected interrupt, clear the bit 0 of register V1 to “0” (refer to
Figure 66 ) and then, change the bit 3 of register I1.
In addition, execute the SNZ0 instruction to clear the EXF0 flag to
“0” after executing at least one instruction (refer to Figure 66 ).
Also, set the NOP instruction for the case when a skip is per-
formed with the SNZ0 instruction (refer to Figure 66 ).
LA
4
; (02)
TV1A
; The SNZ0 instruction is valid ...........
LA
8
; (12)
TI1A
; Control of INT0 pin input is changed
NOP
...........................................................
SNZ0
; The SNZ0 instruction is executed
(EXF0 flag cleared)
NOP
...........................................................
: these bits are not used here.
Note [2] on bit 3 of register I1
When the bit 3 of register I1 is cleared to “0”, the RAM back-up
mode is selected and the input of INT0 pin is disabled, be careful
about the following notes.
When the input of INT0 pin is disabled (register I13 = “0”), set the
key-on wakeup function to be invalid (register K20 = “0”) before
system enters to the RAM back-up mode. (refer to Figure 67).
LA
0
; (02)
TK2A
; Input of INT0 key-on wakeup invalid ..
DI
EPOF
POF
; RAM back-up
: these bits are not used here.
Fig. 67 External 0 interrupt program example-2
Note on bit 2 of register I1
When the interrupt valid waveform of the P30/INT0 pin is
changed with the bit 2 of register I1 in software, be careful about
the following notes.
Depending on the input state of the P30/INT0 pin, the external 0
interrupt request flag (EXF0) may be set when the bit 2 of regis-
ter I1 is changed. In order to avoid the occurrence of an
unexpected interrupt, clear the bit 0 of register V1 to “0” (refer to
Figure 68) and then, change the bit 2 of register I1.
In addition, execute the SNZ0 instruction to clear the EXF0 flag to
“0” after executing at least one instruction (refer to Figure 68).
Also, set the NOP instruction for the case when a skip is per-
formed with the SNZ0 instruction (refer to Figure 68).
LA
4
; (02)
TV1A
; The SNZ0 instruction is valid ...........
LA
12
; (12)
TI1A
; Interrupt valid waveform is changed
NOP
...........................................................
SNZ0
; The SNZ0 instruction is executed
(EXF0 flag cleared)
NOP
...........................................................
: these bits are not used here.
Fig. 68 External 0 interrupt program example-3
16
Fig. 66 External 0 interrupt program example-1
相关PDF资料
PDF描述
M34518M2-XXXFP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PQFP32
M34519M6-XXXFP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO42
M34519M8-XXXFP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO42
M34519E8FP 4-BIT, OTPROM, 6 MHz, MICROCONTROLLER, PDSO42
M34519M8-XXXFP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO42
相关代理商/技术参数
参数描述
M34518M2-XXXFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34518M2-XXXSP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34518M4-XXXFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34518M4-XXXSP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34518M6-XXXFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER