参数资料
型号: M34518E8SP
元件分类: 微控制器/微处理器
英文描述: 4-BIT, OTPROM, 6 MHz, MICROCONTROLLER, PDIP32
封装: 8.90 X 28 MM, 1.78 MM PITCH, PLASTIC, SDIP-32
文件页数: 85/162页
文件大小: 1149K
代理商: M34518E8SP
Rev.3.01
2005.06.15
page 27 of 157
REJ03B0008-0301
4518 Group
(3) External interrupt control registers
Interrupt control register I1
Register I1 controls the valid waveform for the external 0 inter-
rupt. Set the contents of this register through register A with the
TI1A instruction. The TAI1 instruction can be used to transfer the
contents of register I1 to register A.
Table 8 External interrupt control register
Interrupt control register I2
Register I2 controls the valid waveform for the external 1 inter-
rupt. Set the contents of this register through register A with the
TI2A instruction. The TAI2 instruction can be used to transfer the
contents of register I2 to register A.
I13
I12
I11
I10
INT0 pin input control bit
Interrupt valid waveform for INT0 pin/
return level selection bit
INT0 pin edge detection circuit control bit
INT0 pin Timer 1 count start synchronous
circuit selection bit
Interrupt control register I1
R/W
TAI1/TI1A
at RAM back-up : state retained
at reset : 00002
INT0 pin input disabled
INT0 pin input enabled
Falling waveform/“L” level (“L” level is recognized with the SNZI0
instruction)
Rising waveform/“H” level (“H” level is recognized with the SNZI0
instruction)
One-sided edge detected
Both edges detected
Timer 1 count start synchronous circuit not selected
Timer 1 count start synchronous circuit selected
0
1
0
1
0
1
0
1
I23
I22
I21
I20
INT1 pin input control bit (Note 2)
Interrupt valid waveform for INT1 pin/
return level selection bit (Note 2)
INT1 pin edge detection circuit control bit
INT1 pin Timer 3 count start synchronous
circuit selection bit
Interrupt control register I2
R/W
TAI2/TI2A
at RAM back-up : state retained
at reset : 00002
INT1 pin input disabled
INT1 pin input enabled
Falling waveform/“L” level (“L” level is recognized with the SNZI1
instruction)
Rising waveform/“H” level (“H” level is recognized with the SNZI1
instruction)
One-sided edge detected
Both edges detected
Timer 3 count start synchronous circuit not selected
Timer 3 count start synchronous circuit selected
0
1
0
1
0
1
0
1
Notes 1: “R” represents read enabled, and “W” represents write enabled.
2: When the contents of I12, I13 I22 and I23 are changed, the external interrupt request flag (EXF0, EXF1) may be set.
相关PDF资料
PDF描述
M34518M2-XXXFP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PQFP32
M34519M6-XXXFP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO42
M34519M8-XXXFP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO42
M34519E8FP 4-BIT, OTPROM, 6 MHz, MICROCONTROLLER, PDSO42
M34519M8-XXXFP 4-BIT, MROM, 6 MHz, MICROCONTROLLER, PDSO42
相关代理商/技术参数
参数描述
M34518M2-XXXFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34518M2-XXXSP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34518M4-XXXFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34518M4-XXXSP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER
M34518M6-XXXFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 4-BIT CMOS MICROCOMPUTER