- 您现在的位置：买卖IC网 > Datasheet目录339 > M52259EVB (Freescale Semiconductor)BOARD EVAL FOR 52259 COLDFIRE V2 Datasheet资料下载
参数资料
| 型号： | M52259EVB |
| 厂商： | Freescale Semiconductor |
| 文件页数： | 12/46页 |
| 文件大小： | 0K |
| 描述： | BOARD EVAL FOR 52259 COLDFIRE V2 |
| 产品培训模块： | ColdFire MCF5225x |
| 标准包装： | 1 |
| 系列： | ColdFire® |
| 类型： | MCU |
| 适用于相关产品： | MCF52259 |
| 所含物品： | 板，线缆，文档，DVD，闪光灯驱动和电源 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页当前第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页
Family Configurations
The ADC can be configured to perform a single scan and halt, a scan when triggered, or a programmed scan sequence repeatedly
until manually stopped.
The ADC can be configured for sequential or simultaneous conversion. When configured for sequential conversions, up to eight
channels can be sampled and stored in any order specified by the channel list register. Both ADCs may be required during a
scan, depending on the inputs to be sampled.
During a simultaneous conversion, both S/H circuits are used to capture two different channels at the same time. This
configuration requires that a single channel may not be sampled by both S/H circuits simultaneously.
Optional interrupts can be generated at the end of the scan sequence if a channel is out of range (measures below the low
threshold limit or above the high threshold limit set in the limit registers) or at several different zero crossing conditions.
1.2.16
DMA Timers (DTIM0–DTIM3)
There are four independent, DMA transfer capable 32-bit timers (DTIM0, DTIM1, DTIM2, and DTIM3) on the device. Each
module incorporates a 32-bit timer with a separate register set for configuration and control. The timers can be configured to
operate from the system clock or from an external clock source using one of the DTIN n signals. If the system clock is selected,
it can be divided by 16 or 1. The input clock is further divided by a user-programmable 8-bit prescaler that clocks the actual
timer counter register (TCR n ). Each of these timers can be configured for input capture or reference (output) compare mode.
Timer events may optionally cause interrupt requests or DMA transfers.
1.2.17
General Purpose Timer (GPT)
The general purpose timer (GPT) is a four-channel timer module consisting of a 16-bit programmable counter driven by a
seven-stage programmable prescaler. Each of the four channels can be configured for input capture or output compare.
Additionally, channel three, can be configured as a pulse accumulator.
A timer overflow function allows software to extend the timing capability of the system beyond the 16-bit range of the counter.
The input capture and output compare functions allow simultaneous input waveform measurements and output waveform
generation. The input capture function can capture the time of a selected transition edge. The output compare function can
generate output waveforms and timer software delays. The 16-bit pulse accumulator can operate as a simple event counter or a
gated time accumulator.
1.2.18
Periodic Interrupt Timers (PIT0 and PIT1)
The two periodic interrupt timers (PIT0 and PIT1) are 16-bit timers that provide interrupts at regular intervals with minimal
processor intervention. Each timer can count down from the value written in its PIT modulus register or it can be a free-running
down-counter.
1.2.19
Real-Time Clock (RTC)
The Real-Time Clock (RTC) module maintains the system (time-of-day) clock and provides stopwatch, alarm, and interrupt
functions. It includes full clock features: seconds, minutes, hours, days and supports a host of time-of-day interrupt functions
along with an alarm interrupt.
1.2.20
Pulse-Width Modulation (PWM) Timers
The device has an 8-channel, 8-bit PWM timer. Each channel has a programmable period and duty cycle as well as a dedicated
counter. Each of the modulators can create independent continuous waveforms with software-selectable duty rates from 0% to
100%. The timer supports PCM mode, which results in superior signal quality when compared to that of a conventional PWM.
The PWM outputs have programmable polarity, and can be programmed as left aligned outputs or center aligned outputs. For
MCF52259 ColdFire Microcontroller, Rev. 5
Freescale
12
相关PDF资料 |
PDF描述 |
|---|---|
| M5234BCCKIT | KIT EVALUATION FOR MCF5234 |
| M5253DEMO | DEMO BOARD FOR MCF5253 |
| M57160AL-01 | IC GATE DRVR FOR IGBT MOD |
| M57959L | IC GATE DRVR FOR IGBT MOD |
| M57962CL-01 | IC GATE DRVR FOR IGBT MOD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| M52259EVB | 制造商:Freescale Semiconductor 功能描述:MCF5225x Evaluation Board |
| M5226P | 制造商:Panasonic Industrial Company 功能描述:IC |
| M5226PFP | 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:5-ELEMENT GRAPHIC EQUALIZER IC |
| M52277EVB | 功能描述:开发板和工具包 - 其他处理器 EVAL BOARD FOR THE M52277x RoHS:否 制造商:Freescale Semiconductor 产品:Development Systems 工具用于评估:P3041 核心:e500mc 接口类型:I2C, SPI, USB 工作电源电压: |
| M5228FP | 制造商:Panasonic Industrial Company 功能描述:IC |
发布紧急采购，3分钟左右您将得到回复。