- 您现在的位置：买卖IC网 > PDF目录1837 > MAX1544ETL+ (Maxim Integrated Products)IC QUICK-PWM DUAL-PHASE 40-TQFN PDF资料下载
参数资料
| 型号： | MAX1544ETL+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 28/42页 |
| 文件大小： | 0K |
| 描述： | IC QUICK-PWM DUAL-PHASE 40-TQFN |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 50 |
| 系列： | Quick-PWM™ |
| 应用： | 控制器，AMD Hammer |
| 输入电压： | 2 V ~ 28 V |
| 输出数： | 1 |
| 输出电压： | 0.68 V ~ 1.55 V |
| 工作温度： | -40°C ~ 100°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 40-WFQFN 裸露焊盘 |
| 供应商设备封装： | 40-TQFN-EP（6x6） |
| 包装： | 管件 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页当前第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页
Dual-Phase, Quick-PWM Controller for
AMD Hammer CPU Core Power Supplies
Offset Amplifier
The multiphase Quick-PWM controllers include a third
amplifier used to add small offsets to the voltage-posi-
tioned load line. The offset amplifier is summed directly
with the feedback voltage, making the offset gain inde-
pendent of the DAC code. This amplifier has the ability
to offset the output by ±100mV.
The offset is adjusted using resistive voltage-dividers at
the OFS input. For inputs from 0 to 0.8V, the offset
amplifier adds a negative offset to the output that is
equal to 1/8 the voltage appearing at the selected OFS
input (V OUT = V DAC - 0.125 × V OFS ). For inputs from
200
100
0
-100
UNDEFINED
REGION
1.2V to 2V, the offset amplifier adds a positive offset to
the output that is equal to 1/8th the difference between
the reference voltage and the voltage appearing at the
selected OFS input (V OUT = V DAC + 0.125 × (V REF -
-200
0
0.5
0.8 1.2
1.0
OFS VOLTAGE (V)
1.5
2.0
V OFS )). With this scheme, the controller supports both
positive and negative offsets with a single input. The
piecewise linear transfer function is shown in the
Typical Operating Characteristics . The regions of the
transfer function below zero, above 2V, and between
0.8V and 1.2V are undefined. OFS inputs are disal-
lowed in these regions, and the respective effects on
the output are not specified.
The controller disables the offset amplifier during sus-
pend mode (SUS = REF or high).
Forced-PWM Operation (Normal Mode)
During normal mode, when the CPU is actively running
( SKIP = high, Table 7), the Quick-PWM controller oper-
ates with the low-noise forced-PWM control scheme.
Forced-PWM operation disables the zero-crossing
comparator, forcing the low-side gate-drive waveform
to be constantly the complement of the high-side gate-
drive waveform. This keeps the switching frequency
fairly constant and allows the inductor current to
Table 7. S K I P Settings*
Figure 6. Offset Voltage
reverse under light loads, providing fast, accurate neg-
ative output voltage transitions by quickly discharging
the output capacitors.
Forced-PWM operation comes at a cost: the no-load 5V
bias supply current remains between 10mA to 60mA
per phase, depending on the external MOSFETs and
switching frequency. To maintain high efficiency under
light-load conditions, the processor may switch the
controller to a low-power pulse-skipping control
scheme after entering suspend mode.
Low-Power Pulse Skipping
During pulse-skipping override mode ( SKIP = REF or
GND, Table 7), the multiphase Quick-PWM controllers
use an automatic pulse-skipping control scheme. When
SKIP is pulled low, the controller uses the automatic
pulse-skipping control scheme, overriding forced-PWM
operation, and blanks the upper VROK threshold.
SKIP
CONNECTION
High
(3.3V or V CC )
REF
GND
MODE
Two-phase
forced PWM
Two-phase
pulse skipping
One-phase
pulse skipping
OPERATION
The controller operates with a constant switching frequency, providing low-noise forced-PWM
operation. The controller disables the zero-crossing comparators, forcing the low-side gate-
drive waveform to be constantly the complement of the high-side gate-drive waveform.
The controller automatically switches over to PFM operation under light loads. The controller
keeps both phases active and uses the automatic pulse-skipping control scheme, alternating
between the primary and secondary phases with each cycle.
The controller automatically switches over to PFM operation under light loads. Only the main
phase is active. The secondary phase is disabled, DLS and DHS are pulled low, so LXS is a
high impedance.
*Settings for a dual 180 ° out-of-phase controller.
28
______________________________________________________________________________________
相关PDF资料 |
PDF描述 |
|---|---|
| MAX1545ETL+ | IC QUICK-PWM DUAL-PHASE 40-TQFN |
| MAX1551EZK+T | IC BATT CHRGR LI+ 1CELL SOT23-5 |
| MAX1556ETB/V+T | IC REG BUCK SYNC ADJ 1.2A 10TDFN |
| MAX1565ETJ+ | IC DGTL CAM PWR-SUP 5CH 32TQFN |
| MAX1567ETL+ | IC DGTL CAM PWR-SUP 6CH 40TQFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MAX1544ETL+ | 功能描述:电压模式 PWM 控制器 Dual-Phase Quick-PWM Controller RoHS:否 制造商:Texas Instruments 输出端数量:1 拓扑结构:Buck 输出电压:34 V 输出电流: 开关频率: 工作电源电压:4.5 V to 5.5 V 电源电流:600 uA 最大工作温度:+ 125 C 最小工作温度:- 40 C 封装 / 箱体:WSON-8 封装:Reel |
| MAX1544ETL+T | 功能描述:电压模式 PWM 控制器 Dual-Phase Quick-PWM Controller RoHS:否 制造商:Texas Instruments 输出端数量:1 拓扑结构:Buck 输出电压:34 V 输出电流: 开关频率: 工作电源电压:4.5 V to 5.5 V 电源电流:600 uA 最大工作温度:+ 125 C 最小工作温度:- 40 C 封装 / 箱体:WSON-8 封装:Reel |
| MAX1544ETL+TG075 | 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述: |
| MAX1544ETL-T | 功能描述:电压模式 PWM 控制器 RoHS:否 制造商:Texas Instruments 输出端数量:1 拓扑结构:Buck 输出电压:34 V 输出电流: 开关频率: 工作电源电压:4.5 V to 5.5 V 电源电流:600 uA 最大工作温度:+ 125 C 最小工作温度:- 40 C 封装 / 箱体:WSON-8 封装:Reel |
| MAX1544EVKIT | 制造商:Maxim Integrated Products 功能描述:DUAL-PHASE, QUICK-PWM CONTROLLER FOR AMD HAMM - Bulk |
发布紧急采购，3分钟左右您将得到回复。