参数资料
型号: MAX8671XETL+T
厂商: Maxim Integrated Products
文件页数: 32/44页
文件大小: 0K
描述: IC PMIC W/CHARGER 40-TQFN-EP
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 2,500
功能: 充电管理
电池化学: 锂离子(Li-Ion)、锂聚合物(Li-Pol)
电源电压: 4.1 V ~ 6.6 V
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 40-WFQFN 裸露焊盘
供应商设备封装: 40-TQFN-EP(5x5)
包装: 带卷 (TR)
PMIC with Integrated Charger and
Smart Power Selector for Handheld Devices
Table 5. Ideal Charge Currents vs.
Charge Setting Resistor
MONITORING THE BATTERY CHARGE
CURRENT WITH V CISET
R CISET (k Ω )
3.01
I CHGMAX (mA)
1000
I PQ (mA)
100
I TO (mA)
40
V CISET =
R CISET
2000
x I BAT
4.02
746
75
30
4.99
6.04
6.98
8.06
9.09
10.0
11.0
601
497
430
372
330
300
273
60
50
43
37
33
30
27
24
20
17
15
13
12
11
1.5
0
12.1
13.0
14.0
248
231
214
25
23
21
10
9
9
DISCHARGING
0
BATTERY CHARGING CURRENT (A)
1.5V
2000 x R CISET
15.0
200
20
8
Figure 9. Monitoring the Battery Charge Current with the
Voltage from CISET to AGND
I CHGMAX = 2000 ×
Determine I CHGMAX by considering the characteristics
of the battery. It is not necessary to limit the charge cur-
rent based on the capabilities of the expected AC-to-
DC adapter or USB charging input, the system load, or
thermal limitations of the PCB. The MAX8671X automat-
ically lowers the charging current as necessary to
accommodate these factors.
For the selected value of R CISET , calculate I CHGMAX ,
I PQ , and I TO as follows:
1 . 5 V
R CISET
I PQ = 10 % × I CHGMAX
I TO = 4 % × I CHGMAX
In addition to setting the charge current, CISET also pro-
vides a means to monitor battery charge current. The
CISET output voltage tracks the charge current delivered
to the battery, and can be used to monitor the charge
rate, as shown in Figure 9. A 1.5V output indicates the
battery is being charged at the maximum set fast-charge
current, and 0V indicates no charging. This voltage is
also used by the charger control circuitry to set and
monitor the battery current. Avoid adding capacitance
directly to the CISET pin that exceeds 10pF. If filtering of
the charge current monitor is necessary, include a resis-
tor of 100k Ω or more between CISET and the filter
capacitor to preserve charger stability.
Step-Down Converters
(REG1, REG2, REG3)
REG1, REG2, and REG3 are high-efficiency 2MHz cur-
rent-mode, step-down converters with adjustable out-
puts. Each REG1, REG2, and REG3 step-down
converter delivers at least 425mA.
The step-down regulator power inputs (PV_) must be
connected to SYS. The step-down regulators operate
with V SYS from 2.6V to 5.5V. Undervoltage lockout
ensures that the step-down regulators do not operate
with SYS below 2.6V (typ).
See the Enable/Disable (EN) and Sequencing section
for how to enable and disable the step-down convert-
ers. When enabled, the MAX8671X gradually ramps
each output up during a soft-start time. Soft-start elimi-
nates input current surges when regulators are
enabled.
See the PWM section for information about the step-
down converters control scheme.
32
______________________________________________________________________________________
相关PDF资料
PDF描述
MAX8672ETD+T IC MANAGE NIMH BACKUP 14-TDFN
MAX8677AETG+T IC USB/AC ADP CHARGER 24-TQFN
MAX8677CETG+T IC USB/AC ADP CHARGER 24-TQFN
MAX867EUA+ IC REG BOOST ADJ 2.5MA 8UMAX
MAX8686ETL+T IC REG BUCK SYNC ADJ 25A 40TQFN
相关代理商/技术参数
参数描述
MAX8672ETD+T 功能描述:电池管理 Backup Management IC for NiMH Batteries RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel
MAX8672EVKIT+ 制造商:Maxim Integrated Products 功能描述:MAX8672 EVAL KIT - Rail/Tube
MAX8674EVKIT+ 制造商:Maxim Integrated Products 功能描述:STANDARD PRODUCTS - Boxed Product (Development Kits)
MAX8676ELB+ 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述:
MAX8676EWJ+T 制造商:Maxim from Components Direct 功能描述:THE MAXIM MAX8676EWJ+T IS A USB HOT SWAP CONTROLLER. - Tape and Reel 制造商:Maxim 功能描述:The Maxim MAX8676EWJ+T is a USB Hot Swap Controller.