- 您现在的位置：买卖IC网 > Datasheet目录342 > MB85RC128PNF-G-JNE1 (Fujitsu Semiconductor America Inc)IC FRAM 128KBIT 400KHZ 8SOP Datasheet资料下载
参数资料
| 型号： | MB85RC128PNF-G-JNE1 |
| 厂商： | Fujitsu Semiconductor America Inc |
| 文件页数： | 5/20页 |
| 文件大小： | 0K |
| 描述： | IC FRAM 128KBIT 400KHZ 8SOP |
| 特色产品： | FRAM (Ferroelectric RAM) |
| 标准包装： | 1,500 |
| 格式 - 存储器： | RAM |
| 存储器类型： | FRAM（Ferroelectric RAM） |
| 存储容量： | 128K (16K x 8) |
| 速度： | 400kHz |
| 接口： | I²C，2 线串口 |
| 电源电压： | 2.7 V ~ 3.6 V |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SOP |
| 包装： | 托盘 |
| 其它名称： | 865-1172 |
MB85RC128
■ ACKNOWLEDGE (ACK)
In the I 2 C bus, serial data including address or memory information is sent in units of 8 bits. The acknowledge
signal indicates that every each 8 bits of the data is successfully sent and received. The information receiver
side usually outputs “L” every time on the 9th SCL clock after each 8 bits are successfully transmitted. On
the transmitter side, the bus is temporarily released to Hi-Z every time on this 9th clock to allow the acknowl-
edge signal to be received and checked. During this Hi-Z-released period, the receiver side pulls the SDA
line down to indicate “L” that the previous 8bits communication is successfully received.
If the information receiver side detects Stop condition before driving the acknowledge “L”, the read operation
ends and the I 2 C bus enters the standby state. If Stop condition is not sent, nor does the transmitter detect
the acknowledge “L”, the bus remains in the released state “H” without doing anything.
? Acknowledge timing overview diagram
SCL
1
2
3
8
9
SDA
Start
DS05–13110–3E
The transmitter side should always release SDA on the
9th bit. At this time, the receiver side outputs a pull-down
to indicate a successful byte transfer (ACK response).
ACK
5
相关PDF资料 |
PDF描述 |
|---|---|
| MB85RC16PNF-G-JNE1 | IC FRAM 16KBIT 1MHZ 8SOP |
| MB85RC16VPNF-G-JNE1 | IC FRAM 16KBIT 400KHZ 8SOP |
| MB85RC64PNF-G-JNE1 | IC FRAM 64KBIT 400KHZ 8SOP |
| MB85RS128APNF-G-JNE1 | IC FRAM 128KBIT 25MHZ 8SOP |
| MB85RS64PNF-G-JNE1 | IC FRAM 64KBIT 20MHZ 8SOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MB85RC128PNF-G-JNERE1 | 制造商:FUJITSU 功能描述:128K(16K8) bit,I2C,Memory FRAM |
| MB85RC16 | 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:Memory FRAM 16 K (2 K x 8) Bit I2C |
| MB85RC16PNF-G-JNE1 | 功能描述:IC FRAM 16KBIT 1MHZ 8SOP RoHS:是 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:2,500 系列:- 格式 - 存储器:EEPROMs - 串行 存储器类型:EEPROM 存储容量:1K (128 x 8) 速度:100kHz 接口:UNI/O?（单线） 电源电压:1.8 V ~ 5.5 V 工作温度:-40°C ~ 85°C 封装/外壳:8-TSSOP，8-MSOP（0.118"，3.00mm 宽） 供应商设备封装:8-MSOP 包装:带卷 (TR) |
| MB85RC16PNF-G-JNERE1 | 制造商:FUJITSU 功能描述:16K(2K8) bit,I2C,Memory FRAM |
| MB85RC16PN-G-AMERE1 | 功能描述:IC FRAM 16KBIT 1MHZ 8SON 制造商:fujitsu electronics america, inc. 系列:- 包装:剪切带（CT） 零件状态:停产 格式 - 存储器:RAM 存储器类型:FRAM（Ferroelectric RAM） 存储容量:16K（2K x 8） 速度:1MHz 接口:I2C，2 线串口 电压 - 电源:2.7 V ~ 3.6 V 工作温度:-40°C ~ 85°C（TA） 封装/外壳:8-WFDFN 裸露焊盘 供应商器件封装:8-SON 标准包装:1 |
发布紧急采购，3分钟左右您将得到回复。