- 您现在的位置：买卖IC网 > Datasheet目录342 > MB85RC128PNF-G-JNE1 (Fujitsu Semiconductor America Inc)IC FRAM 128KBIT 400KHZ 8SOP Datasheet资料下载
参数资料
| 型号： | MB85RC128PNF-G-JNE1 |
| 厂商： | Fujitsu Semiconductor America Inc |
| 文件页数： | 8/20页 |
| 文件大小： | 0K |
| 描述： | IC FRAM 128KBIT 400KHZ 8SOP |
| 特色产品： | FRAM (Ferroelectric RAM) |
| 标准包装： | 1,500 |
| 格式 - 存储器： | RAM |
| 存储器类型： | FRAM（Ferroelectric RAM） |
| 存储容量： | 128K (16K x 8) |
| 速度： | 400kHz |
| 接口： | I²C，2 线串口 |
| 电源电压： | 2.7 V ~ 3.6 V |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SOP |
| 包装： | 托盘 |
| 其它名称： | 865-1172 |
MB85RC128
■ COMMAND
? Byte Write
If the 8th bit of the device address word (R/W = 0) is sent following the start condition, the slave responds
with an ACK. After this ACK, write addresses and data are sent in the same way, and the write ends by
master, generating a stop condition at the end.
S
1 0 1 0 A2 A1 A0 0 A
Address
High 8b its
A
Address
Lo w 8b its
A
W rite
Data 8b its
A P
00 XXXXXX
MSB
X X X X X X XX
LSB
Access from master
Access from slave
S Start Condition
P Stop Condition
A ACK
Note : In the MB85RC128, input “00” as the upper 2 bits of the MSB.
? Page Write
If additional 8bits are sent after the same command as Byte Write, a page write is performed. If more bytes
are sent than will fit up to the end of the address, the address rolls over to 0000 H . Therefore, if more than
8KBytes are sent, the data is overwritten in order starting from the start of the FRAM memory address that
was written first. Because FRAM performs write operations at bus speed, the data will be written to FRAM
after the ACK response finishes immediately.
S
1 0 1 0 A2 A1 A0 0 A
Address
High 8b its
A
Address
Lo w 8b its
A
W rite
Data 8b its
A
W rite
Data
...
A P
Access from master
Access from slave
S Start Condition
P Stop Condition
A ACK
Note : It is not necessary to take a period for internal write programming cycles from the buffer to the memory
after the stop condition is generated.
8
DS05–13110–3E
相关PDF资料 |
PDF描述 |
|---|---|
| MB85RC16PNF-G-JNE1 | IC FRAM 16KBIT 1MHZ 8SOP |
| MB85RC16VPNF-G-JNE1 | IC FRAM 16KBIT 400KHZ 8SOP |
| MB85RC64PNF-G-JNE1 | IC FRAM 64KBIT 400KHZ 8SOP |
| MB85RS128APNF-G-JNE1 | IC FRAM 128KBIT 25MHZ 8SOP |
| MB85RS64PNF-G-JNE1 | IC FRAM 64KBIT 20MHZ 8SOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MB85RC128PNF-G-JNERE1 | 制造商:FUJITSU 功能描述:128K(16K8) bit,I2C,Memory FRAM |
| MB85RC16 | 制造商:FUJITSU 制造商全称:Fujitsu Component Limited. 功能描述:Memory FRAM 16 K (2 K x 8) Bit I2C |
| MB85RC16PNF-G-JNE1 | 功能描述:IC FRAM 16KBIT 1MHZ 8SOP RoHS:是 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:2,500 系列:- 格式 - 存储器:EEPROMs - 串行 存储器类型:EEPROM 存储容量:1K (128 x 8) 速度:100kHz 接口:UNI/O?（单线） 电源电压:1.8 V ~ 5.5 V 工作温度:-40°C ~ 85°C 封装/外壳:8-TSSOP，8-MSOP（0.118"，3.00mm 宽） 供应商设备封装:8-MSOP 包装:带卷 (TR) |
| MB85RC16PNF-G-JNERE1 | 制造商:FUJITSU 功能描述:16K(2K8) bit,I2C,Memory FRAM |
| MB85RC16PN-G-AMERE1 | 功能描述:IC FRAM 16KBIT 1MHZ 8SON 制造商:fujitsu electronics america, inc. 系列:- 包装:剪切带（CT） 零件状态:停产 格式 - 存储器:RAM 存储器类型:FRAM（Ferroelectric RAM） 存储容量:16K（2K x 8） 速度:1MHz 接口:I2C，2 线串口 电压 - 电源:2.7 V ~ 3.6 V 工作温度:-40°C ~ 85°C（TA） 封装/外壳:8-WFDFN 裸露焊盘 供应商器件封装:8-SON 标准包装:1 |
发布紧急采购，3分钟左右您将得到回复。