- 您现在的位置：买卖IC网 > PDF目录95982 > MMSF2P02ER2 (ON SEMICONDUCTOR) 2500 mA, 20 V, P-CHANNEL, Si, SMALL SIGNAL, MOSFET PDF资料下载
参数资料
| 型号： | MMSF2P02ER2 |
| 厂商： | ON SEMICONDUCTOR |
| 元件分类： | 小信号晶体管 |
| 英文描述： | 2500 mA, 20 V, P-CHANNEL, Si, SMALL SIGNAL, MOSFET |
| 封装： | MINIATURE, CASE 751-07, SOP-8 |
| 文件页数： | 7/9页 |
| 文件大小： | 247K |
| 代理商： | MMSF2P02ER2 |
MMSF2P02E
http://onsemi.com
7
INFORMATION FOR USING THE SO8 SURFACE MOUNT PACKAGE
MINIMUM RECOMMENDED FOOTPRINT FOR SURFACE MOUNTED APPLICATIONS
Surface mount board layout is a critical portion of the total
design. The footprint for the semiconductor packages must
be the correct size to ensure proper solder connection
interface between the board and the package. With the
correct pad geometry, the packages will selfalign when
subjected to a solder reflow process.
mm
inches
0.060
1.52
0.275
7.0
0.024
0.6
0.050
1.270
0.155
4.0
SO8 POWER DISSIPATION
The power dissipation of the SO8 is a function of the
input pad size. This can vary from the minimum pad size
for soldering to the pad size given for maximum power
dissipation. Power dissipation for a surface mount device is
determined by TJ(max), the maximum rated junction
temperature of the die, RθJA, the thermal resistance from
the device junction to ambient; and the operating
temperature, TA. Using the values provided on the data
sheet for the SO8 package, PD can be calculated as
follows:
PD =
TJ(max) TA
RθJA
The values for the equation are found in the maximum
ratings table on the data sheet. Substituting these values
into the equation for an ambient temperature TA of 25°C,
one can calculate the power dissipation of the device which
in this case is 2.5 Watts.
PD =
150°C 25°C
50°C/W
= 2.5 Watts
The 50°C/W for the SO8 package assumes the
recommended footprint on a glass epoxy printed circuit
board to achieve a power dissipation of 2.5 Watts using the
footprint shown. Another alternative would be to use a
ceramic substrate or an aluminum core board such as
Thermal Clad
t. Using board material such as Thermal
Clad, the power dissipation can be doubled using the same
footprint.
SOLDERING PRECAUTIONS
The melting temperature of solder is higher than the rated
temperature of the device. When the entire device is heated
to a high temperature, failure to complete soldering within
a short time could result in device failure. Therefore, the
following items should always be observed in order to
minimize the thermal stress to which the devices are
subjected.
Always preheat the device.
The delta temperature between the preheat and
soldering should be 100°C or less.*
When preheating and soldering, the temperature of the
leads and the case must not exceed the maximum
temperature ratings as shown on the data sheet. When
using infrared heating with the reflow soldering
method, the difference shall be a maximum of 10°C.
The soldering temperature and time shall not exceed
260°C for more than 10 seconds.
When shifting from preheating to soldering, the
maximum temperature gradient shall be 5°C or less.
After soldering has been completed, the device should
be allowed to cool naturally for at least three minutes.
Gradual cooling should be used as the use of forced
cooling will increase the temperature gradient and
result in latent failure due to mechanical stress.
Mechanical stress or shock should not be applied
during cooling.
* * Soldering a device without preheating can cause
excessive thermal shock and stress which can result in
damage to the device.
相关PDF资料 |
PDF描述 |
|---|---|
| MMSF3305R2 | 6 A, 30 V, 0.02 ohm, P-CHANNEL, Si, POWER, MOSFET |
| MMSF3P02HDR2 | 5.6 A, 20 V, 0.095 ohm, 2 CHANNEL, P-CHANNEL, Si, POWER, MOSFET |
| MMSF3P02ZR2 | 6500 mA, 20 V, P-CHANNEL, Si, SMALL SIGNAL, MOSFET |
| MMSF3P02ZR1 | 6500 mA, 20 V, P-CHANNEL, Si, SMALL SIGNAL, MOSFET |
| MMSF3P03HDR1 | 4600 mA, 30 V, P-CHANNEL, Si, SMALL SIGNAL, MOSFET |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MMSF3205 | 制造商:MOTOROLA 制造商全称:Motorola, Inc 功能描述:SINGLE TMOS POWER MOSFET 11 AMPERES 20 VOLTS |
| MMSF3300 | 制造商:MOTOROLA 制造商全称:Motorola, Inc 功能描述:SINGLE TMOS POWER MOSFET 30 VOLTS |
| MMSF3305 | 制造商:MOTOROLA 制造商全称:Motorola, Inc 功能描述:SINGLE TMOS POWER MOSFET 9.1 AMPERES 30 VOLTS |
| MMSF3350R2 | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| MMSF3P02HD | 制造商:MOTOROLA 制造商全称:Motorola, Inc 功能描述:SINGLE TMOS POWER MOSFET 3.0 AMPERES 20 VOLTS |
发布紧急采购，3分钟左右您将得到回复。