参数资料
型号: MT80C51-12R
厂商: TEMIC SEMICONDUCTORS
元件分类: 微控制器/微处理器
英文描述: 8-BIT, MROM, 12 MHz, MICROCONTROLLER, PQFP44
文件页数: 128/170页
文件大小: 4133K
代理商: MT80C51-12R
60
ATtiny4/5/9/10 [DATASHEET]
8127F–AVR–02/2013
11.6.2
Compare Match Blocking by TCNT0 Write
All CPU writes to the TCNT0 Register will block any compare match that occurs in the next timer clock cycle, even
when the timer is stopped. This feature allows OCR0x to be initialized to the same value as TCNT0 without trigger-
ing an interrupt when the Timer/Counter clock is enabled.
11.6.3
Using the Output Compare Unit
Since writing TCNT0 in any mode of operation will block all compare matches for one timer clock cycle, there are
risks involved when changing TCNT0 when using any of the Output Compare channels, independent of whether
the Timer/Counter is running or not. If the value written to TCNT0 equals the OCR0x value, the compare match will
be missed, resulting in incorrect waveform generation. Do not write the TCNT0 equal to TOP in PWM modes with
variable TOP values. The compare match for the TOP will be ignored and the counter will continue to 0xFFFF.
Similarly, do not write the TCNT0 value equal to BOTTOM when the counter is downcounting.
The setup of the OC0x should be performed before setting the Data Direction Register for the port pin to output.
The easiest way of setting the OC0x value is to use the Force Output Compare (0x) strobe bits in Normal mode.
The OC0x Register keeps its value even when changing between Waveform Generation modes.
Be aware that the COM0x1:0 bits are not double buffered together with the compare value. Changing the
COM0x1:0 bits will take effect immediately.
11.7
Compare Match Output Unit
The Compare Output Mode (COM0x1:0) bits have two functions. The Waveform Generator uses the COM0x1:0
bits for defining the Output Compare (OC0x) state at the next compare match. Secondly the COM0x1:0 bits control
the OC0x pin output source. Figure 11-7 on page 61 shows a simplified schematic of the logic affected by the
COM0x1:0 bit setting. The I/O Registers, I/O bits, and I/O pins in the figure are shown in bold. Only the parts of the
general I/O port control registers (DDR and PORT) that are affected by the COM0x1:0 bits are shown. When refer-
ring to the OC0x state, the reference is for the internal OC0x Register, not the OC0x pin. If a system reset occur,
the OC0x Register is reset to “0”.
相关PDF资料
PDF描述
MF280C51C-25D 8-BIT, MROM, 25 MHz, MICROCONTROLLER, PQFP44
MV80C51-30D 8-BIT, MROM, 30 MHz, MICROCONTROLLER, PQFP44
MF180C31-36R 8-BIT, 36 MHz, MICROCONTROLLER, PQFP44
MF280C51-20D 8-BIT, MROM, 20 MHz, MICROCONTROLLER, PQFP44
MF180C51-25D 8-BIT, MROM, 25 MHz, MICROCONTROLLER, PQFP44
相关代理商/技术参数
参数描述
MT80C51BH 制造商:ROCHESTER 制造商全称:ROCHESTER 功能描述:CMOS SINGLE - CHIP 8-BIT MICROCOMPUTER 64K program Memory Space
MT80C51FB 制造商:Rochester Electronics LLC 功能描述:- Bulk
MT80C51FB/B 制造商:Intel 功能描述:
MT80GB 制造商:Datak Corporation 功能描述:
MT80JSF1G72NDY-1G1F1A2 制造商:Micron Technology Inc 功能描述:8GB 1GX72 DDR3 SDRAM MODULE PBF DIMM 1.5V REGISTERED - Trays