参数资料
型号: PCM9211PTR
厂商: TEXAS INSTRUMENTS INC
元件分类: 网络接口
英文描述: DATACOM, TOKEN RING TRANSCEIVER, PQFP48
封装: GREEN, PLASTIC, LQFP-48
文件页数: 29/121页
文件大小: 1219K
代理商: PCM9211PTR
www.ti.com
SBAS495 – JUNE 2010
Auxiliary PCM Audio Input and Output (I/O)
There are up to 3x digital auxiliary (AUX) inputs and one AUX output on the PCM9211. These I/Os are
multiplexed and shared with RXIN4 through RXIN7, MPIOB, and MPIOC. Each input and output supports a
four-wire digital audio interface that is similar to the I2S protocol. Each I/O can support SCK (system clock), BCK
(bit clock), LRCK (left/right clock, or word clock) and data transmissions. The audio format supported through the
Aux I/O can be configured for I2S, 24-bit left-justified (LJ), 24-bit right-justified (RJ), and 16-bit RJ output.
The AUX inputs are designed to be driven in Clock Slave mode. The Aux Output can only operate in Master
mode. The system clock can be run from 128fS, 256fS, and 512fS. However, the ADC cannot run from 128fS.
Routing
All 3x AUXIN data and clocks, in addition to data and clocks from the ADC and DIR modules, are routed to three
output ports. The Main Output Port and Aux Output Port (that can be output through MPIO_B) are both PCM
outputs capable of I2S, RJ, and LJ. The DIT output is an S/PDIF signal output.
All three outputs have individual multiplexers that can select between the AUXINs, DIR, or ADC.
Control Interface
The PCM9211 can be controlled by either SPI or I2C (up to a 400-kHz I2C bus). However, on startup, the device
goes into a default routing mode. Details of this mode are discussed in the Serial Control Mode section. For
certain applications, the default configuration may be suitable, and therefore does not require external
programming.
Multipurpose I/O
The PCM9211 includes 12 MPIO (Multi-Purpose Inputs/Outputs) and two MPO (Multi-Purpose Output) pins.
These MPIO/MPO pins can be easily set to different configurations through registers to allow different routing
and provide data outputs based on the specific application.
The 12 MPIO pins are divided into three groups (A, B, and C); each group has four pins (MPIO_Ax, MPIO_Bx,
and MPIO_Cx).
For example, to access all 12 S/PDIF inputs, the MPIO_Ax pins can be configured to support S/PDIF RXIN8 and
RXIN11. However, if the application requires an additional I2S input, then the MPIO_Ax pins can be configured
for an Aux In instead of RXIN8 and RXIN11.
Copyright 2010, Texas Instruments Incorporated
15
Product Folder Link(s): PCM9211
相关PDF资料
PDF描述
PCM9211PT DATACOM, TOKEN RING TRANSCEIVER, PQFP48
PCN11MF STRIP TERMINAL BLOCK, 1 DECK
PCN12E-32S-2.54DSA 32 CONTACT(S), FEMALE, STRAIGHT TWO PART EURO CONNECTOR, SOLDER, SOCKET
PCN12E-44S-2.54DSA 44 CONTACT(S), FEMALE, STRAIGHT TWO PART EURO CONNECTOR, SOLDER, SOCKET
PCN12E-50S-2.54DSA 50 CONTACT(S), FEMALE, STRAIGHT TWO PART EURO CONNECTOR, SOLDER, SOCKET
相关代理商/技术参数
参数描述
PCM-93 功能描述:电线鉴定 Pre-Printed WM Card, Vinyl Cloth, .22" W RoHS:否 制造商:TE Connectivity / Q-Cees 产品:Labels and Signs 类型: 材料:Vinyl 颜色:Blue 宽度:0.625 in 长度:1 in
PCM-9342 制造商:ADVANTECH 制造商全称:Advantech Co., Ltd. 功能描述:X86 SoC 3.5" SBC with VGA, LCD, LAN, USB, SATA, CF, PC/104
PCM-9342F-64A1E 制造商:ADVANTECH 制造商全称:Advantech Co., Ltd. 功能描述:X86 SoC 3.5" SBC with VGA, LCD, LAN, USB, SATA, CF, PC/104
PCM-9342FZ2-64A1E 制造商:ADVANTECH 制造商全称:Advantech Co., Ltd. 功能描述:X86 SoC 3.5" SBC with VGA, LCD, LAN, USB, SATA, CF, PC/104
PCM-9342L-64A1E 制造商:ADVANTECH 制造商全称:Advantech Co., Ltd. 功能描述:X86 SoC 3.5" SBC with VGA, LCD, LAN, USB, SATA, CF, PC/104